Top Sellers
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
SmartPilot Corepacks from RAYMARINE INC.
The central nervous system of every SmartPilot system, Raymarine corepacks are comprised of a course computer,patented fluxgate electronic compass and rudder reference unit. In order to select the right SmartPilot corepack for your vessel you must first determine which autopilot drive unit is right for your steering system. Each corepack contains a SmartPilot course computer in either a standard configuration or a “G” version. T400 Corepacks are now called S3 Corepacks. Fluxgate compass - 3.
|
|
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
Light-Saver® Water-Activated Strobe Light from BUZTRONICS, INC.
Small and unobtrusive, this water-activated, bright LED strobe can be seen over one mile at nightThe buoyant, waterproof plastic case measures just 2"L x 1"dia. and comes with three pre-installed AG13 batteries with 80-100 hour operating life. Includes a lanyard and clip for attachment to PFDs or other items on your boat.
|
Stow Master Horn from STOWMASTER INC
Blow the man down with our unbelievably loud hornThis tiny 3"L x 2"dia. horn uses your breath to produce a loud blast. It's easy to grab in a hurry when you need to get someone's attention and it comes with a lanyard, so you can place it around your neck.
|
Holding Clips, 1/4" from BECKSON MARINE INC
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
|
1'' Transom Drain W/Plug from BECKSON MARINE INC
All-nylon drain and plug with a plastic retainer and O-ring.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
|
|
|
from RAYMARINE INC, 1" from RAYMARINE INC, 2" from RAYMARINE INC
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Traditional Binnacle-Mount Compasses
WS-P 100% Repairable Exclusive 5-Year Ritchie Warranty.
Part No: D-515-EB
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Traditional Binnacle-Mount Compasses
WS-P 100% Repairable Exclusive 5-Year Ritchie Warranty.
Part No: D-515-EP
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Explorer Compasses
Explorer Compasses This series is for fast runabouts, bass boats, center consoles and sportboats. Three mounting options enable you to select the style appropriate for your needs. Low profile, surface-mount models fit in tight spaces, and feature a quick-release bracket. Features include built-in compensator magnets, 12V DC night lighting, jewel and steel pivot movements and movable sunshades. 2 3/4" apparent, direct-reading cards. : 2 3/4" or 3" . Card Type: Direct or Dual .
Part No: D-55
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Tiller Pilot Pushrod Extensions
RayMarine Tiller Pilot Accessory - Pushrod Extensions Extends the length of the standard pushrod by screwing into its end. Two extensions can be screwed together if extra length is required.
Part No: D003
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Tiller Pilot Pushrod Extensions
RayMarine Tiller Pilot Accessory - Pushrod Extensions Extends the length of the standard pushrod by screwing into its end. Two extensions can be screwed together if extra length is required.
Part No: D004
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Tiller Pilot Pushrod Extensions
RayMarine Tiller Pilot Accessory - Pushrod Extensions Extends the length of the standard pushrod by screwing into its end. Two extensions can be screwed together if extra length is required.
Part No: D006
|
|
|
|
Home -> Electronics -> Autopilots->Tiller Pilot Pushrod Extensions
RayMarine Tiller Pilot Accessory - Pushrod Extensions Extends the length of the standard pushrod by screwing into its end. Two extensions can be screwed together if extra length is required.
Part No: D008
|
|
|
|
Home -> Electronics -> Autopilots->Autopilot Mounting Accessories
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. . Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP . Push-Rod Extensions For tiller models. . Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum.
Part No: D010
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Autopilot Mounting Accessories
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. . Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP . Push-Rod Extensions For tiller models. . Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum.
Part No: D011
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Chemicals & Tissue
PETT™ Waste Bag Kit for Portable Head Used with the PETT Portable Head, these degradable bags with amazing Pooh-powder™ inside gels liquid, neutralizes odor and starts decay process. To be used with PETT Portable Head.
Part No: D019W12
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Autopilot Mounting Accessories
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. . Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP . Push-Rod Extensions For tiller models. . Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum.
Part No: D031
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Autopilot Mounting Accessories
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. . Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP . Push-Rod Extensions For tiller models. . Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum.
Part No: D038
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D100
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Water Spot Remover
Specfically developed to remove hard water spots.
Part No: D1000
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D1000
|
|
|
|
Home -> Electronics -> Boat Instruments->HawkEye® In-Dash Digital Depth Sounder (D10DX)
HawkEye® In-Dash Digital Depth Sounder (D10DX) The D10DX includes all the advanced sonar, depth alarm, and keel offset capabilities of the D10D, yet incorporates dual temperature displays. A simple press of a button gives instant access to water or air temperature readings via integrated sensors in both the transducer and head unit. Includes interchangeable black and white bezels and face plates, and also a sun cover to protect the LCD during storage. D10DX. 01. T - Transom Mount Transducer .
Part No: D10DX-01T
|
|
|
|
Home -> Electronics -> Boat Instruments->HawkEye® In-Dash Digital Depth Sounder (D10DX)
HawkEye® In-Dash Digital Depth Sounder (D10DX) The D10DX includes all the advanced sonar, depth alarm, and keel offset capabilities of the D10D, yet incorporates dual temperature displays. A simple press of a button gives instant access to water or air temperature readings via integrated sensors in both the transducer and head unit. Includes interchangeable black and white bezels and face plates, and also a sun cover to protect the LCD during storage. D10DX. 01. T - Transom Mount Transducer .
Part No: D10DX-06T
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Very Large Area Charts->Imray-Iolaire Cruising Charts
Designed specifically for the cruising yachtsman, they cover the Caribbean from Puerto Rico to Venezuela, the Atlantic Islands of the Azores, Madeira, Canaries and Bermuda, plus coverage of the Mediterranean.
Part No: D12
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D125
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D150
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D1500
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Autopilot Mounting Accessories
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. . Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP . Push-Rod Extensions For tiller models. . Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum.
Part No: D160
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders
Sticks to any clean, flat, slick surface.
Part No: D1700074
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D200
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D2000
|
|
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: D244
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D250
|
|
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: D284
|
|
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: D285
|
|
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: D286
|
|
|