Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
No Spill Fuel Saver from DAVIS INSTRUMENTS
Attach the No Spill container to the hull with the powerful suction cups over the fuel tank vent when refueling. The fuel-resistant bottle will capture the runover fuel from the vent when the tank is full. Prevent stains on the hull and pollution to the environment.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
|
|
|
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
|
|
|
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
5/16" Galvanized Steel Screw Pin Anchor Shackle, 1500lb. SWL from WEST MARINE
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
|
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
|
|
2IN from SCHAEFER, 2" Pin Diameter from SCHAEFER
|
This site contains about 37,903 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,250
1,260
1,264
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-67
|
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-68
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> D & Headboard Shackles->Cast Stainless Headboard Shackles
Investment Cast Halyard Shackle has a double-threaded pin that prevents loss, but may be removed if desired. Choose between the rope halyard shackle, flared at halyard hole to prevent chafe, or the wire halyard shackle with removable head pin for prespliced wire eyes. Investment cast Type 316 stainless steel. Pin Diameter Rope: 7/16'' . Pin Diameter Wire: 3/16". Interior Clearance: 3/4''W x 1 5/8''D.
Part No: 93-75
|
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-84
|
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-85
|
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-86
|
|
|
|
|
Home -> Cordage -> Rigging Products -> Rigging Terminals->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-87
|
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-88
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Battery Combiners/Isolators->Marine Multi-Battery Isolators
Battery Isolators have the ability to charge multiple batteries automatically from one or two alternators eliminating overcharging. Features include a heat-chamber design, and a corrosion-resistant casing to withstand harsh marine environments. Prevents the higher charged battery discharging into the lower battery. Each battery bank provides current control. Ignition protected, compact and easy to install. Mfr.
Part No: 93-BI70/2-A
|
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Battery Combiners/Isolators->Marine Multi-Battery Isolators
Battery Isolators have the ability to charge multiple batteries automatically from one or two alternators eliminating overcharging. Features include a heat-chamber design, and a corrosion-resistant casing to withstand harsh marine environments. Prevents the higher charged battery discharging into the lower battery. Each battery bank provides current control. Ignition protected, compact and easy to install. Mfr.
Part No: 93-BI70/3-A
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
Charles’ patented Smart-Y Adapters enable boaters to reliably double available shore voltage. Designed for long life, the Smart-Y eliminates the potential for shock hazard when one leg is disconnected; both legs must be plugged into the power source before current will flow. Blade Style: Female: 100A 125/250V twist-lock; Male: Two 50A 125/250 twist-lock . Material: UL-recognized vinyl, nickel-plated bronze blades, glass-filled nylon/polycarbonate internal components .
Part No: 93-SMTY100-A
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
With a single 50-amp 125/250-volt power cable, you can draw 30 amps, 250 volts from two 30-amp/125-volt shore power receptacles safely and intelligently. Will function only if the polarity at the power pedestal (that is; hot and neutral) are not reversed, and inputs are of opposite phase. Since the power is derived from two shore power receptacles, the maximum allowable current (without tripping circuit breakers) is 30 amps at the boat inlet.
Part No: 93-SMTY50-A
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 930
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->Marine Spark Plugs
High-quality plugs with all the features that make Champion the industry’s leader. Triple-coated shell for excellent corrosion resistance. Triple seal assembly that’s the strongest in the industry. Precision rolled threads that conform to all manufacturers’ specs. * Q and R type plugs only. Some plugs have been redesigned to accommodate the different heat ranges required for reformulated fuel. Before you order a spark plug, be sure to consult the manufacturer’s most current reference guide.
Part No: 930
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Unifoil Replacement Rudders
Replace your boat’s rudder and improve its sailing performance with one of Idasailor Marine’s Unifoil transom-hung rudders. Pointing ability is improved with a high-performance NACA 0012 foil section, offering improved lift to weather and less drag for better all-round speed, as well as surer tacks. The Unifoil rudder’s solid HDPE construction does not split, delaminate or absorb water, and it’s neutral buoyancy will not add weight to your transom under sail. Section: NACA 0012 foil section .
Part No: 9300
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories
Rafts and lounges are fun but none provide stability on the water like this revolutionary platform. It’s strong enough to use as a deck with tables and chairs and versatile enough to function as a swim platform for diving, a dock for wakeboarding or place to tie up your personal watercraft. Dock includes a 360° marine-grade rope handle with 16 reinforced attachment points to simplify water entries. Includes: Custom carry bag. High-pressure air pump with gauge and repair kit. 7'8"sq.
Part No: 93000
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Change Pumps->Porta Quick Oil Changer Replacement Parts
The Porta Quick 12V oil changing system removes oil through the dipstick tube so there's no need for you to work your way under the engine.
Part No: 93000-0100
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Tour Series Digital Motors
Trolling motors with digital speed controlThese motors feature Digital Guardian speed control, stainless steel shafts, all metal heads and foot pedals, and rock solid adjustable Pull/Pull steering that limits torque and fatigue. The sealed on-off switch offers unmatched durability while the Soft Start feature smoothes initial acceleration at high speed settings.
Part No: 930010130
|
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Tour Series Digital Motors
Trolling motors with digital speed controlThese motors feature Digital Guardian speed control, stainless steel shafts, all metal heads and foot pedals, and rock solid adjustable Pull/Pull steering that limits torque and fatigue. The sealed on-off switch offers unmatched durability while the Soft Start feature smoothes initial acceleration at high speed settings.
Part No: 930010200
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->ProPulse Propeller Spare Parts
Hubs for additional engine types and applications.
Part No: 9301-0
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->ProPulse Propeller Spare Parts
Hubs for additional engine types and applications.
Part No: 9302-0
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->ProPulse Propeller Spare Parts
Hubs for additional engine types and applications.
Part No: 9303-0
|
|
|
|
Home -> Ventilation -> Blowers & Heaters -> Engine Room Heaters
Put heat right where you want it with this 340Btu defogger. Plugs into any lighter-type 12V receptacle; louvered vent front swivels to any angle to clear up fogged windows or warm up chilly hands. Includes 5' power cord and both screw-down and suction cup bases. Heat Source: 12V DC . Draw: 8. 3A . Btu: 340 . Material: Plastic . Dimensions: 4"H x 6-1/2"W x 2-1/2"D .
Part No: 9303CA-BCS
|
|
|
|
Home -> Fishing -> Rod & Reel Combinations->Sargus Spinning Combos
Inshore Salt/Freshwater Spinning; Target Species: Small game fish under 20lb. Durable spinning combos combine the lightweight toughness of Penn’s all-metal Sargus reels with the casting performance and sensitivity of the Slammer graphite spinning rods. Rugged, durable rods feature solid tips and hollow blanks for excellent lightweight action, and EVA foam grips for comfort. Corrosion-resistant reels . Strong, aluminum alloy frames, covers and rotors,.
Part No: 93067
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Code/Official Flags->International Flags
All flags available in our vibrant bright nylon colors. These beauties add an international flair to any boat. All World flags measure 12" x 18" with brass grommets.
Part No: 93069
|
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Code/Official Flags->International Flags
All flags available in our vibrant bright nylon colors. These beauties add an international flair to any boat. All World flags measure 12" x 18" with brass grommets.
Part No: 93070
|
|
|
|
.
Part No: 93071
|
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Code/Official Flags->International Flags
All flags available in our vibrant bright nylon colors. These beauties add an international flair to any boat. All World flags measure 12" x 18" with brass grommets.
Part No: 93072
|
|
|
|
Commodore Flag 12x18|Commodore Flag 12x18.
Part No: 93076
|
|
|
|
|
.
Part No: 93077
|
|
|
