Top Sellers
Fillet Spoon Knife 12 1/2" from WEST MARINE
West Marine's Fillet Knives have been developed with real anglers in mind. Highest-quality surgical stainless-blades are molded into non-slip rubberized soft grip handles for maximum sharpness, comfort and safety. Tang hilt protects your hand. Bright orange plastic boosts visibility in low-light conditions. The spoon model makes scraping out entrails and blood veins easy and mess-less.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
Head & Holding Tank Neutralizer & Flush, Pint from WEST MARINE
Use this preparation to neutralize, flush, and prepare your head and holding tank for use with new treatments. Eliminates cross contamination which can render a holding tank treatment useless when switching from one type to another. Also ideal for spring commissioning or as preparation for winter layup.
|
Elbow 90 Degree, Angle 2-way, 1" Stainless Steel from WEST MARINE
Bow Rail and Handrail Replacement Products Stainless steel fittings are made from high-quality cast and polished 316 stainless steel. Chrome Zamak fittings are made from double-chrome-plated zinc. Fittings are drilled and countersunk for #10 fasteners and include 1/4"-28 stainless set screws. Type 304 stainless steel tubing is TIG (ultra high heat) welded, polished and buffed.
|
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Port Runner Folding Bike from WEST MARINE
Reliable portside transport that's super easy to stow! Our exclusive 20" bike is ideal for reliable portside transport. The distance between the dock and the grocery store is not always short—or flat—and that's why this bike has a chrome-plated steel derailleur and six big sprockets for climbing inclined streets. Stows small for space economy and features a convenient luggage rack to make errands easier. 28lbs. Gears: Six . Drive Train Components: Shimano RD-TX30 .
|
|
|
Boat Hook Tip from WEST MARINE
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
|
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
|
Finish Gel Coat - Waxed Non-Laminating Quart, White from WEST MARINE
Use with polyester and epoxy resins for reliable, high-strength coverings, laminates, and repairs. Medium density.
|
|
from AFTCO, AF1 from WEST MARINE, AF2 from WEST MARINE
|
|
Home -> Engine Systems -> Engine Lubrication
Developed for Autolube Oil Injection Systems used on all 2-cycle air and liquid cooled gasoline engines.
Part No: ACC-Y2MTC-W3-00
|
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> 4 Stroke Oil
Developed for Autolube Oil Injection Systems used on all 2-cycle air and liquid cooled gasoline engines.
Part No: ACC-Y2MTC-W3-12
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Provides extra protection during the critical cold-start period as well as rust, corrosion, and deposit protection.
Part No: ACC-Y4M10-30-00
|
|
|
|
Reliable, Boater-Biased Info: What's On Site, What's Nearby, What It Will Cost The Atlantic Cruising Club's Guides to Marinas provide extensive, independent, objective information on marinas and their surrounding areas in both print and electronic formats. ACC Reviewers have visited every transient marina on the U. S. East, Gulf and Pacific Northwest Coasts able to accommodate boats with LOAs from 30 to 300 feet.
Part No: ACCFE
|
|
|
|
|
Reliable, Boater-Biased Info: What's On Site, What's Nearby, What It Will Cost The Atlantic Cruising Club's Guides to Marinas provide extensive, independent, objective information on marinas and their surrounding areas in both print and electronic formats. ACC Reviewers have visited every transient marina on the U. S. East, Gulf and Pacific Northwest Coasts able to accommodate boats with LOAs from 30 to 300 feet.
Part No: ACCLI
|
|
|
|
|
Reliable, Boater-Biased Info: What's On Site, What's Nearby, What It Will Cost The Atlantic Cruising Club's Guides to Marinas provide extensive, independent, objective information on marinas and their surrounding areas in both print and electronic formats. ACC Reviewers have visited every transient marina on the U. S. East, Gulf and Pacific Northwest Coasts able to accommodate boats with LOAs from 30 to 300 feet.
Part No: ACCNE
|
|
|
|
Ace Mesh Shrimp-Smelt or Minnow Net Bow: 16" diameter. Handle: 37"–66".
Part No: ACM-16-6-2PC
|
|
|
|
Home -> Books & Videos -> Books
Thomas McEwen. A pocket-sized alternative to Chapman, jam-packed with information boaters need to know! Includes a wealth of how-to info, plus reference facts, figures, formulas, graphs and tables about boating. Paperback . 3 1/4"W x 5 3/8"H x 15/16"D. . 766pp.
Part No: ACP012
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->VHF Accessories
ICOM VHF Accessories include: Chargers and adapters 12v Lighter cords Battery packs and trays Flush mount kits And more!.
Part No: AD-114
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Straining first helps ensure optimum resultsUse to remove unwanted solids from paint that can mar your finished result. Especially handy for salvaging varnishes and enamels that have skinned over during storage.
Part No: AD002
|
|
|
|
Home -> Paint & Maintenance -> Tools
Don't get stuck without this stick!An essential tool for doing the job right.
Part No: AD003
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
**Pump-Intake Retroft Atlantes|**Pump-Intake Retroft Atlantes.
Part No: ADPRFK12
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
**Atlantes Diaphragm Pump 24V|**ATLANTES DIAPHRAGM PUMP 24V.
Part No: ADPRFK24
|
|
|
|
Home -> Fishing -> Fishing Accessories
Afco Adjustable Nylon Drop Straps Designed to fit all Afco straps.
Part No: ADS1
|
|
|
|
Home -> Fishing -> Fishing Accessories->EDGE Pocket Fishing Computers
Like having an experienced fishing guide in your pocketKnowing when the fish will feed makes your time on the water more productive. These pocket computers use location-specific solunar information, combined with barometric pressure to optimize your time fishing by giving you the best times to fish anywhere. Four-hour future feeding prediction, and feeding forecasts through 2099 will put you ahead of the game. 6oz. Mariner's Edge also provides tide data with integrated tidal charts for 540 U.
Part No: AE-2
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes
The internal skeleton of the AdvancedFrame™ system allows for an inflatable kayak that’s long enough for two people, without any loss of rigidity. A conventional inflatable would bend and flex at a whopping 15’ long, but this boat stays firm and straight to glide smoothly through the water. Plus, you can choose from Optional Deck kits to convert to a single cockpit or double cockpit. The seats are fully adjustable and offer ergonomic back support to prevent fatigue.
Part No: AE1007-WM
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes
AdvancedFrame Kayaks—the portability of an inflatable with the performance of a hardshell Hardshell paddlers have always envied the way inflatables deflate, roll up, and fit in the trunk of the car. Its aluminum-framed bow slices through the water like a knife and rivals the tracking ability of hard shell kayaks. It has more than enough storage space for camping gear, with a large rear compartment and forward bungee deck lacing. Folded size 30" x 17" x 10".
Part No: AE1012-WM
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Inflatable Kayaks
The do-it-all, go-anywhere kayak. We call it the "do it all" kayak, combining rocker and a low-profile for paddling in whitewater, plus it incorporates an aluminum bow and stern frame to improve tracking in open water conditions. With three seat buckle locations, it's easy to move the seats for tandem or solo paddling. Or, leave them closed in flatwater conditions for improved speed and performance. High-support, adjustable padded seat provides comfort for hours of paddling.
Part No: AE1014-WM
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes
Easy to use, easy to transport inflatable is now even more durable and stable. A new foam skin floor allows for more leg room while still providing excellent temperature insulation from cold water. The upgraded seat features an adjustable inflatable cushion and breathable mesh back to make paddling even more comfortable. The tracking fin and skid plate improves tracking efficiency for hardshell-kayak performance in a lightweight portable design. Bungee deck lacing and a mesh accessory pocket.
Part No: AE1021-WM
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Inflatable Kayaks
Paddle your favorite lakes, rivers or bays with a friend in this new and improved inflatable kayak for two people. Side tube sleeve cover on the main inflation tube adds additional protection to the main chamber. Duffel bag, foot pump and repair kit included. Newly designed seat features an adjustable, inflatable cushion and breathable mesh back for more comfortable paddling. Application: Recreational tandem inflatable Length: 12' Boat Beam: 35" Weight: 29lb. Capacity/Persons: 350lb.
Part No: AE1023-WM
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes
Spray skirt keeps waves out, warmth inDesigned to keep the bigger waves out and the warmth in on a cold day. Attaches to the kayak with an elastic fitting. Made of high density polyester with a waterproof coating and welded seams.
Part No: AE2007-WM
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles
Kayak paddle disassembles for easy packing and travelTouring 4-part paddle is portable, lightweight and rugged with asymmetrical blades, ideal for air travelers. Dihedral blade for improved efficiency. Blade angle 60 deg. RHC, LHC, and unfeathered. 231cm/2. 7lb. Packable length: 25.
Part No: AE2015
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories
Optional Deck Skirt to convert your AdvancedFrame Convertible™ Kayak to a single-skirted boat (sold separately).
Part No: AE2021-WM
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes->BackBone Brace for Inflatable Kayak
Insertable "backbone" stiffens up our inflatable kayak frameDesigned to fit the AdvancedFrame Kayaks, the BackBone is a collapsible bow-to-stern frame which enhances rigidity and performance, allowing you to take your AdvancedFrame kayak into rougher waters. Made of anodized aluminum alloy and rigid ABS plastic.
Part No: AE2023-AF1
|
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes->BackBone Brace for Inflatable Kayak
Insertable "backbone" stiffens up our inflatable kayak frameDesigned to fit the AdvancedFrame Kayaks, the BackBone is a collapsible bow-to-stern frame which enhances rigidity and performance, allowing you to take your AdvancedFrame kayak into rougher waters. Made of anodized aluminum alloy and rigid ABS plastic.
Part No: AE2023-AFC
|
|
|
|
Home -> Fishing -> Fishing Accessories
Stand Up Fighting Belt 80lb to 130lb Tackle Alum Plate w/Closed cell Pad Super-thick, closed-cell EVA foam back pad engineered to maximize both comfort and leverage. Position the belt releatively low across the thighs, to distribute the load evenly for maximum pull when fighitng big fish in stand-up style. Co-molded to the heavy duty foam back pad . Super strong, molded glass-filled nylon gimbal pocket that is engineered to quickly guide rod butts into an optimum fish fighting position.
Part No: AFB1
|
|
|
|
Home -> Fishing -> Fishing Accessories
The ultimate fighting belt! Aftco AFB2 Stand Up Fighting Belt - 50 to 80lb tackle with aluminum plate and closed cell pad. Gimbal pocket's stainless steel pin is adjustable for horizontal or vertical alignment. These fighting belts are well built and offer great value and performance. Aftco fighting belts float in case they fall overboard.
Part No: AFB2
|
|
|
|
Home -> Fishing -> Fishing Accessories
The ultimate fighting belt! Line Weight- 20-50LB Aftco Fighting Belt is designed to be the ultimate fighting belt with it's advanced design, materials and comfort. Co-molded to the foam back pad is a heavy-duty, yet lightweight gold-anodized, stamped aluminum front plate. Super durable, it features posts at each side that accept unique Quick Clips, which "snap" the two piece belt straps (or optional drop straps) in place for quickly getting into or out of the belt.
Part No: AFB3
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: AFC-1858B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: AFC-1858N
|
|
|
