Top Sellers
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
|
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
Drill Pump Kit from JABSCO
The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube. Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Shut-Off Switch from SHURFLO
>Adaptable to any 1/2" hose, this shut-off switch allows for easy on/off operation.
|
Electronic Horn, Black from AQUA-SIGNAL
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
|
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
|
from BOMAR, 16", from SEAFIT, 1, 1-1, 2" from BOMAR, 16" x 14-1, 25" from BOMAR
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-55
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-7
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-85
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon In-Line Check Valves
Noncorroding nylon.
Part No: G#74-9
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System
Drop-in flush mount Ceran glass with grey graphics and a Pencil edge. Available in 120V or 240V (specify when ordering). One 1,200 watt radiant element . Limiter in burner prevents overheating . Sea rail kit available as an option .
Part No: G1247-5100 120V
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
.
Part No: G13W
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring
Premium LED trailering lights are fully submersiblePremium LED lights are designed for submersible applications and often used in the fender marker lamp location. Polycarbonate lights are sonically sealed to keep out water and corrosion. Kit includes chrome mounting bracket, two-wire sealed pigtail and PVC grommet to accommodate any mounting location.
Part No: G1512-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting
Premium LED trailering lights are fully submersiblePremium LED lights are designed for submersible applications and often used in the fender marker lamp location. Polycarbonate lights are sonically sealed to keep out water and corrosion. Kit includes chrome mounting bracket, two-wire sealed pigtail and PVC grommet to accommodate any mounting location.
Part No: G1513-5
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: G223
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: G257
|
|
|
|
Home -> Electrical -> Shore Power
Enter GalvanAlert—the world’s only shore power corrosion detector with reverse polarity indicator. GalvanAlert easily attaches to your 30A shore power inlet and cord set to constantly monitor if there is unsafe corrosion activity or a reverse polarity situation (which can cause a shock of fire hazard). It will protect every boat plugged into 30A power, even if you have a galvanic isolator. Warns of unsafe reverse polarity conditions and destructive galvanic activity .
Part No: G30
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: G30-2B
|
|
|
|
Home -> Fishing -> Fishing Accessories->Economy Straight Gaffs
Mengo Economy Straight Gaffs Remarkable quality for their price. Stainless hooks have 3" tines and built-in tip protectors. Handles are anodized aluminum.
Part No: G336
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Economy Straight Gaffs
Mengo Economy Straight Gaffs Remarkable quality for their price. Stainless hooks have 3" tines and built-in tip protectors. Handles are anodized aluminum.
Part No: G348
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Personal Safety
Why endure painful knees when you can use these?Thick closed cell pads with gel inserts distribute weight throughout pad for all-day comfort and protection. Sure-grip outer accordion shell protects and grips most surfaces without slipping. Adjustable straps for a custom fit. Eliminate painful "point loading" on knees. Closed cell foam combined with gel inserts. Nonskid surface prevents slips.
Part No: G361
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Economy Straight Gaffs
Mengo Economy Straight Gaffs Remarkable quality for their price. Stainless hooks have 3" tines and built-in tip protectors. Handles are anodized aluminum.
Part No: G372
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Flagship Series Molded Elliptical Portlights
Flagship molded portlights offer easy installation, stylish lines and easy operation, all at a competitive price. These injectionmolded ports with 3/8" tinted acrylic windows are long-lasting even in harsh and salty climates. Features include adjustable quick action dogs and a beveled exterior frame for maximum draining. All sizes meet Area 1 CE approval. Material: Injection-molded plastic . Latches: Adjustable quick dogs . Hinges: Friction hinges hold position without stays or straps.
Part No: G614---28
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Flagship Series Molded Elliptical Portlights
Flagship molded portlights offer easy installation, stylish lines and easy operation, all at a competitive price. These injectionmolded ports with 3/8" tinted acrylic windows are long-lasting even in harsh and salty climates. Features include adjustable quick action dogs and a beveled exterior frame for maximum draining. All sizes meet Area 1 CE approval. Material: Injection-molded plastic . Latches: Adjustable quick dogs . Hinges: Friction hinges hold position without stays or straps.
Part No: G618---28
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Flagship Series Molded Elliptical Portlights
Flagship molded portlights offer easy installation, stylish lines and easy operation, all at a competitive price. These injectionmolded ports with 3/8" tinted acrylic windows are long-lasting even in harsh and salty climates. Features include adjustable quick action dogs and a beveled exterior frame for maximum draining. All sizes meet Area 1 CE approval. Material: Injection-molded plastic . Latches: Adjustable quick dogs . Hinges: Friction hinges hold position without stays or straps.
Part No: G618---28SS
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: G65
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Access Hatches
Molded of high-impact UV stabilized propylene. Clean textured lid. Low profile for floor mounting. No screws visible from the exterior. 180 degree opening. Strong lid with support bars. Double gasket system for optimum sealing. New patented easy opening, easy closing slam latch.
Part No: G71020--W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Access Hatches
Low-profile hatches are great for floor mounting. Made of high-impact, UV stabilized polypropylene. Smooth-textured lid has support bars for added strength and screws are hidden from view. Double gasket system for a watertight seal. Easy opening, easy closing slam latch. White. Type: Access hatch. Material: High-impact UV-stabilized polypropylene . Latches: Non-locking slam latch . Hinges: 180° non-locking hinges. Installation Hardware Required: #10 SS Pan Head (sold separately) .
Part No: G71030--W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Access Hatches
Molded of high-impact UV stabilized propylene. Clean textured lid. Low profile for floor mounting. No screws visible from the exterior. 180 degree opening. Strong lid with support bars. Double gasket system for optimum sealing. New patented easy opening, easy closing slam latch.
Part No: G7711---W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Access Hatches
Low-profile hatches are great for floor mounting. Made of high-impact, UV stabilized polypropylene. Smooth-textured lid has support bars for added strength and screws are hidden from view. Double gasket system for a watertight seal. Easy opening, easy closing slam latch. White. Type: Access hatch. Material: High-impact UV-stabilized polypropylene . Latches: Non-locking slam latch . Hinges: 180° non-locking hinges. Installation Hardware Required: #10 SS Pan Head (sold separately) .
Part No: G7812---W
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: G7B
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Deck Plates->High-Impact Polycarbonate Deck Plates
High impact polycarbonate UV-stabilized deck plates.
Part No: G800
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8001-MKII
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8003-MKII
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8005-MKII
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8008-MKII
|
|
|
