Welcome! Please Sign-In
Top Sellers
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
AmSteel-Blue is a 12-strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema® SK-75 fiber. This rope yields the maximum in strength-to-weight ratio and is stronger than wire rope constructions—yet it floats. Superior flex, fatigue and wear resistance. Stronger than AmSteel. Much stronger than steel. Very low stretch. Easily spliced. Superior flex.
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
Mas Gelcoat Repair Kit, White from MAS EPOXY
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
Fuel Filter Only from MERCURY MARINE
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
Match ‘N’ Patch Large Gelcoat Repair Kit from EVERCOAT
Match ‘N’ Patch Large Gelcoat Repair Kit from EVERCOAT
Complete kit for a custom color matchYour complete solution for color-matching gelcoat and making minor repairs. Includes verything you need to make minor surface gelcoat repairs. Kit includes:1/4 pint of premium gelcoat paste. 1/4 oz. liquid hardener. six tubes of coloring agents (white, black, yellow, brown and blue). mixing cup & mixing sticks. release film. cleaning solvent.
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
Compact Horn w/ Black Cover 10023 from AFI
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
Steering Wheel, Black w/ Burlwood Inserts from SCHMITT MARINE STEER
Steering Wheel, Black w/ Burlwood Inserts from SCHMITT MARINE STEER
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. These wheels feature aluminum spoke with polyurethane grips. The 3/4" tapered hub fits most steering systems. Black aluminum spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.

Black from MEGAFEND, Blue from MEGAFEND, from ALEXANDER-ROBERTS

36" x 72" Companionway Screen from SOGEMAN Home -> Cabinet & Deck Hardware -> Hatches & Ports->Bugbusters Hatch & Companionway Screens
These screens are ballasted with a series of 1/4” x 1/2”L lead beads which are rust resistant, nonmagnetic and heavier than stainless-steel chain. They follow the contour of decks hatches and companionways to completely bug-proof your boat, are wind resistant and fire retardant. Each screen comes with a heavy-duty plastic carry case. Companionway Screens—Tie to the handrails and drop down to the cockpit floor—no Velcro® frames needed!.
Part No: MD3672
48" x 68" Companionway Screen from SOGEMAN Home -> Cabinet & Deck Hardware -> Hatches & Ports->Bugbusters Hatch & Companionway Screens
These screens are ballasted with a series of 1/4” x 1/2”L lead beads which are rust resistant, nonmagnetic and heavier than stainless-steel chain. They follow the contour of decks hatches and companionways to completely bug-proof your boat, are wind resistant and fire retardant. Each screen comes with a heavy-duty plastic carry case. Companionway Screens—Tie to the handrails and drop down to the cockpit floor—no Velcro® frames needed!.
Part No: MD4868
Krazy Clean All-Purpose Cleaner - 24 oz from MDR Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Krazy Clean All-Purpose Cleaner
Nontoxic, nonflammable formula Biodegradable.
Part No: MDR-653
Krazy Clean All-Purpose Cleaner - 48 oz from MDR Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Krazy Clean All-Purpose Cleaner
Nontoxic, nonflammable formula Biodegradable.
Part No: MDR-655
Auto Generator Start Module from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters
Automatically starts and stops your generator, keeping track of the battery voltage and the temperature inside the cabin. Selectable cabin temp.
Part No: ME-AGS
Battery Monitor Kit from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters
The Battery Monitor gives you a “fuel gauge” type of meter for your batteries that shows their “percentage of charge”. Reports state of charge, real time amps, amp hours in/out, and minimum/maximum DC volts.
Part No: ME-BMK
ME-RC Remote Control from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters -> Inverters
The ME-RC remote control provides convenient finger-tip operation, including one-knob programming for the ME, MS, and RD Series inverters. The ME-RC also has the option of controlling the ME-AGS Automatic Gen Start using network connections. The large LCD screen and at-a glance LEDs display the inverter/charger status in a straightforward way. Soft keys give simple access to menus and a rotary encoder knob makes it easy to quickly scroll through menus and select settings.
Part No: ME-RC50
Smart Battery Combiner from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters
It is designed to monitor and charge a second battery using a portion of the current that is charging a main battery. This 25-amp combiner/isolator integrates an optional solenoid drive, remote voltage sense for more accurate sensing, High and Low battery cut-out to prevent over/undercharging, and automatic 12- or 24-volt operation. The basic design makes connecting the SBC as simple as it can get. Like other three-wire voltage followers, this is a very simple device to connect and setup.
Part No: ME-SBC
Marine Swage Eye 5/16"" Wire, 1/2" Dia. from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->Marine Swage Eyes
Used to connect wire to fittings with clevis pins, like mast terminals, forks, double jaw turnbuckles, etc. Type 316 stainless.
Part No: ME10
18" x 22" Hatch Screen from SOGEMAN Home -> Cabinet & Deck Hardware -> Hatches & Ports->Bugbusters Hatch & Companionway Screens
These screens are ballasted with a series of 1/4” x 1/2”L lead beads which are rust resistant, nonmagnetic and heavier than stainless-steel chain. They follow the contour of decks hatches and companionways to completely bug-proof your boat, are wind resistant and fire retardant. Each screen comes with a heavy-duty plastic carry case. Companionway Screens—Tie to the handrails and drop down to the cockpit floor—no Velcro® frames needed!.
Part No: ME1822
2000W Cont. Cap. Inverter/Charger, 3700W Surge Cap., 100A Charger Output from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters -> Inverters->ME Series Modified Sine Wave Inverter/Chargers
Easy-to-install AC power for your boat A safe, reliable inverter/charger for your boat, made to the stringent requirements of UL/cUL 458. Ruggedly marinized with conformal-coated circuit boards, powder-coated chassis and stainless fasteners; the ME Series can be mounted on a shelf or vertical bulkhead. Magnum’s unique die-cast aluminum base allows full ratings up to 45°C for superior high temperature operation. Output Waveform: Modified sine wave. DC Input Type: 5/16" ring terminals.
Part No: ME2012-20B-U
2000W Cont. Cap. Inverter/Charger, 3700W Surge Cap., 100A Charger Output from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters->ME Series Modified Sine Wave Inverter/Chargers
Easy-to-install AC power for your boat A safe, reliable inverter/charger for your boat, made to the stringent requirements of UL/cUL 458. Ruggedly marinized with conformal-coated circuit boards, powder-coated chassis and stainless fasteners; the ME Series can be mounted on a shelf or vertical bulkhead. Magnum’s unique die-cast aluminum base allows full ratings up to 45°C for superior high temperature operation. Output Waveform: Modified sine wave. DC Input Type: 5/16" ring terminals.
Part No: ME2012-U
2500W Cont. Cap. Inverter/Charger, 5000W Surge Cap., 120A Charger Output from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters -> Inverters->ME Series Modified Sine Wave Inverter/Chargers
Easy-to-install AC power for your boat A safe, reliable inverter/charger for your boat, made to the stringent requirements of UL/cUL 458. Ruggedly marinized with conformal-coated circuit boards, powder-coated chassis and stainless fasteners; the ME Series can be mounted on a shelf or vertical bulkhead. Magnum’s unique die-cast aluminum base allows full ratings up to 45°C for superior high temperature operation. Output Waveform: Modified sine wave. DC Input Type: 5/16" ring terminals.
Part No: ME2512-U
25" x 25" Screen Hatch from SOGEMAN Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Bugbusters Hatch & Companionway Screens
These screens are ballasted with a series of 1/4” x 1/2”L lead beads which are rust resistant, nonmagnetic and heavier than stainless-steel chain. They follow the contour of decks hatches and companionways to completely bug-proof your boat, are wind resistant and fire retardant. Each screen comes with a heavy-duty plastic carry case. Companionway Screens—Tie to the handrails and drop down to the cockpit floor—no Velcro® frames needed!.
Part No: ME2525
30" x 30" Hatch Screen from SOGEMAN Home -> Cabinet & Deck Hardware -> Hatches & Ports->Bugbusters Hatch & Companionway Screens
These screens are ballasted with a series of 1/4” x 1/2”L lead beads which are rust resistant, nonmagnetic and heavier than stainless-steel chain. They follow the contour of decks hatches and companionways to completely bug-proof your boat, are wind resistant and fire retardant. Each screen comes with a heavy-duty plastic carry case. Companionway Screens—Tie to the handrails and drop down to the cockpit floor—no Velcro® frames needed!.
Part No: ME3030
3100W Cont. Cap. Inverter/Charger, 6000W Surge Cap., 160A Charger Output from MAGNUM ENERGY INC Home -> Electrical -> Chargers & Inverters -> Inverters->ME Series Modified Sine Wave Inverter/Chargers
Easy-to-install AC power for your boat A safe, reliable inverter/charger for your boat, made to the stringent requirements of UL/cUL 458. Ruggedly marinized with conformal-coated circuit boards, powder-coated chassis and stainless fasteners; the ME Series can be mounted on a shelf or vertical bulkhead. Magnum’s unique die-cast aluminum base allows full ratings up to 45°C for superior high temperature operation. Output Waveform: Modified sine wave. DC Input Type: 5/16" ring terminals.
Part No: ME3112-U
Optional Breeze-Booster Bug Screen for Hatches up to 17"–22" from BREEZE BOOSTER Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: MED-SC
Breeze-Booster for Hatches up to 17"–22" from BREEZE BOOSTER Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: MEDIUM-BL
Youth Short-Sleeve Rash Tee, Metal, 14 from O NEILL Home -> Foul Weather Gear & Jackets -> Long Underwear & Rash Guards->Youth Short-Sleeve Rash Tee
Now the kids can hit the beach with the same gear as the world's best surfers! Rated U. P. F. 50 (Ultraviolet Protection Factor) Maximum Protection. Colors: Red, Blue, Metal.
Part No: METAL-14
E-Zrelease Dehooker, Mini from HENRY S TACKLE Home -> Fishing -> Fishing Accessories->E-Z Release Dehookers
The one tool you need for catch-and-release fishingCatch and release has never been easier with these lightweight, corrosion-resistant floating dehookers designed for quick internal or external hook removal. Soft grip handle is comfortable, non-slip and easy to hold on to. Mini E-Z release is great for smaller game fish and Sabiki.
Part No: MEZ
Contol Knob - Ridged from SCHAEFER Home -> Engine Systems -> Control Systems->Shift Knobs
These handsome gold knobs not only look great, they're practical too! Offered in smooth and ridged styles.
Part No: MF-11-G
Contol Knob - Smooth from SCHAEFER Home -> Engine Systems -> Control Systems->Shift Knobs
These handsome gold knobs not only look great, they're practical too! Offered in smooth and ridged styles.
Part No: MF-12-G
18" x 45" Inflatable Fender from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->HDI™ Inflatable Fenders
Durable, high-density materials and assembly are the benchmarks of this fender. Quality, space-saving inflatable fenders in popular standard sizes to match most all needs. Each is a marvel of structural integrity and has been subjected to extreme testing to assure its ability to withstand heavy marine use.
Part No: MF-HDI 1845
26" x 65" Inflatable Fender from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->HDI™ Inflatable Fenders
Durable, high-density materials and assembly are the benchmarks of this fender. Quality, space-saving inflatable fenders in popular standard sizes to match most all needs. Each is a marvel of structural integrity and has been subjected to extreme testing to assure its ability to withstand heavy marine use.
Part No: MF-HDI 2665
38" x 75" Inflatable Fender from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->HDI™ Inflatable Fenders
Durable, high-density materials and assembly are the benchmarks of this fender. Quality, space-saving inflatable fenders in popular standard sizes to match most all needs. Each is a marvel of structural integrity and has been subjected to extreme testing to assure its ability to withstand heavy marine use.
Part No: MF-HDI 3875
HDI Inflatable Fender Cover, 18" x 45", Black from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->FenderCoat™ Covers for HDI™ Inflatable Fenders
FenderCoat™ cover to protect your megayacht surfaces from fender contact.
Part No: MF-HDI CBLK
HDI Inflatable Fender Cover, 26" x 65", Black from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->FenderCoat™ Covers for HDI™ Inflatable Fenders
FenderCoat™ cover to protect your megayacht surfaces from fender contact.
Part No: MF-HDI CBLK
HDI Inflatable Fender Cover, 38" x 75", Black from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->FenderCoat™ Covers for HDI™ Inflatable Fenders
FenderCoat™ cover to protect your megayacht surfaces from fender contact.
Part No: MF-HDI CBLK
HDI Inflatable Fender Cover, 18" x 45", Blue from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->FenderCoat™ Covers for HDI™ Inflatable Fenders
FenderCoat™ cover to protect your megayacht surfaces from fender contact.
Part No: MF-HDI CBLU
HDI Inflatable Fender Cover, 38" x 75", Blue from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->FenderCoat™ Covers for HDI™ Inflatable Fenders
FenderCoat™ cover to protect your megayacht surfaces from fender contact.
Part No: MF-HDI CBLU
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11