Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
|
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
|
|
Light from SIERRA, Knob from SIERRA, Anode from SIERRA
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Canvas Fasteners
Items with screw-hole bases do not include screws.
Part No: MP7256W
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Canvas Fasteners
Items with screw-hole bases do not include screws.
Part No: MP7257W
|
|
|
|
Home -> Electrical -> Interior Lighting -> Fluorescent Lights
**Light Module|**Light Module.
Part No: MP78870
|
|
|
|
Home -> Electrical -> Interior Lighting
**Light Module|**Light Module.
Part No: MP78880
|
|
|
|
Home -> Electrical -> Interior Lighting -> Fluorescent Lights
Light module.
Part No: MP78910
|
|
|
|
Home -> Electrical -> Interior Lighting
**Light Module|**Light Module.
Part No: MP78950
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Anti-Rotation Collar|**Anti-Rotation Collar.
Part No: MP78960
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components
**Knob|**Knob.
Part No: MP79730
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components
**Knob|**Knob.
Part No: MP79760
|
|
|
|
Cap your screws with colorful molded plastic caps. 10 per pack. Sizes: 6/8 or 10/12.
Part No: MP7988
|
|
|
|
Cap your screws with colorful molded plastic caps. 10 per pack. Sizes: 6/8 or 10/12.
Part No: MP7989
|
|
|
|
Screw Cap White #6 and #8-10pk|Screw Cap White #6 and #8-10pk.
Part No: MP7990
|
|
|
|
Cap your screws with colorful molded plastic caps. 10 per pack. Sizes: 6/8 or 10/12.
Part No: MP7991
|
|
|
|
Cap your screws with colorful molded plastic caps. 10 per pack. Sizes: 6/8 or 10/12.
Part No: MP7992
|
|
|
|
Includes software CD, memory cartridge and USB peripheral device for connecting your C-cartridges to the computer. System requirements: Windows 95/98/2000/ME/XP, 8MB RAM (32MB for 2000, ME and XP), 4MB available disk space, VGA display, one available USB port View contours, soundings, port information, marina information, tide data . Create and change routes, measure distances, edit waypoints and marks . Enables transfer of saved trip plans to C-MAP memory card for use in your chart plotter .
Part No: Mplanner XX
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Glasskoter Resin Rollers
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
Part No: MPR-101F-9
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Glasskoter Resin Rollers
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
Part No: MPR-201F-7
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Glasskoter Resin Rollers
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
Part No: MPR-201F-9
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Coolmatic Cooling Kit
Kit turns an insulated space into a 12V refrigerator This compact do-it-yourself kit is ideal for easily converting an existing, passive insulated cooling area into a full, high performing compressor-powered refrigerator unit. AC Adapter offers problem-free connection to 110/240 volts AC power.
Part No: MPS-35
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
WAECO AC Adapter for BD50 compressors Cigarette lighter adapter. For problem-free connection to 110/240V AC power.
Part No: MPS-50
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Polyester Braid Mini-Spools
Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing . Construction: Double braid . Cover Fiber/Construction: 16-plait polyester . Core Fiber/Construction: 8-plait polyester .
Part No: MR-2BLU
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Polyester Braid Mini-Spools
Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing . Construction: Double braid . Cover Fiber/Construction: 16-plait polyester . Core Fiber/Construction: 8-plait polyester .
Part No: MR-2R
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Polyester Braid Mini-Spools
Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing . Construction: Double braid . Cover Fiber/Construction: 16-plait polyester . Core Fiber/Construction: 8-plait polyester .
Part No: MR-3BLK
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Polyester Braid Mini-Spools
Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing . Construction: Double braid . Cover Fiber/Construction: 16-plait polyester . Core Fiber/Construction: 8-plait polyester .
Part No: MR-3BLU
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Polyester Braid Mini-Spools
Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing . Construction: Double braid . Cover Fiber/Construction: 16-plait polyester . Core Fiber/Construction: 8-plait polyester .
Part No: MR-3R
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->MRD 60 Waterproof CD Stereo
Marine coated circuitry & watertight front panel resist the elementsThe first truly waterproof stereo we have seen, this 180W system is designed and built exclusively for the marine environment. Unlike other 12V stereos the Poly-Planar is built for function at sea. The optional CD changer provides uninterrupted listening of up to six CDs. Controls: Volume knob, Up-down tuning arrow keys, local-distant switch, custom equalizer, automatic Dynamic Loudness bass adjustment . Tuner: Digital .
Part No: MRD-60B
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->MRD 60 Waterproof CD Stereo
Marine coated circuitry & watertight front panel resist the elementsThe first truly waterproof stereo we have seen, this 180W system is designed and built exclusively for the marine environment. Unlike other 12V stereos the Poly-Planar is built for function at sea. The optional CD changer provides uninterrupted listening of up to six CDs. Controls: Volume knob, Up-down tuning arrow keys, local-distant switch, custom equalizer, automatic Dynamic Loudness bass adjustment . Tuner: Digital .
Part No: MRD-60W
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->MRD-70 AM/FM/CD/MP3 Multi-Zone Component Stereo System
Put stereo sound in every cabin, and get an intercom to boot!The MRD-70 AM/FM/CD Receiver and RD44 Display are the foundation for an expandable multi-zone system that offers independent control in up to four zones with the RD44 Remote Display and MZ100 Amp in each zone. Easily connected through a single watertight DIN type cable, each remote has independent control over the audio input source. 20'L extension cable and 4" x 4" display suitable for flush or gimbaled mounting.
Part No: MRD-70G
|
|
|
|
Home -> Safety -> Man Overboard Gear
Easy to throw and can be thrown farther than other rescue tools to deliver fast flotation aid to a person in the water The incredibly easy to use Rescue Stick is designed to be thrown up to 150' with incredible accuracy to provide fast flotation assistance to a person at risk of drowning. Easily stowed in a boat, vehicle, backpack or by the pool, it will be accessible when and where you need it. Anyone who can throw a stick can throw Rescue Stick to someone in distress in the water.
Part No: MRD100
|
|
|
|
Rugged and stylish, sunglasses for boaters Get maximum protection and glare-free vision with Smith’s high-quality, high-performance polarized optics. Smith polarized lenses fight glare and block all harmful ultra violet light to protect your eyes. Tapered Lens Technology eliminates optical distortion, providing the utmost in optical comfort and clarity for those long days on the water. Models with glass lenses use Smith’s Techlite lenses for lightweight polarized performance. Tortoise frame.
Part No: MRGPBRTT
|
|
|