Top Sellers
Ultima Electronic Bilge Switch from JOHNSON PUMPS
The same switch that comes preinstalled on Johnson Ultima Combo Automatic Bilge Pumps. With no moving parts and totally sealed solid state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/deactivates at 2" and 3/4" fluid levels. A three second delay prevents false starts. Rated to handle pumps up to 20 amps at 12V or 24V DC. Activation Method: Solid-state electronic . Dimensions: 2-3/8"H x 2-11/16"L x 1-1/8"D .
|
Super Sub Pump 500, 500gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Super Sub Pump 650 Auto, 650gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Hullgard Primer Converter, Qt. from AWLGRIP
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.
|
Triple, 1/2" - 9/16" Line Dia., 59.6oz from LEWMAR
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.
|
|
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
|
from AWLGRIP, 16" Throat from EQUIPLITE, 1" Throat from EQUIPLITE
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-15
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-20
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-25
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-30
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0619-05
|
|
|
|
Home -> Sailboat -> Rigging Products->Hand Swaging Tools
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
Part No: NO 2
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hand Swaging Tools
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
Part No: NO 3
|
|
|
|
Home -> Cordage -> Rigging Products -> Rigging, Sewing, Splicing
A powerful five-hole swaging tool featuring adjustable jaws made of the finest grade hardened steel. The adjustment allows you to compensate for tool wear over time. Compresses oval and stop sleeves for wire sizes: 1/16", 3/32", 1/8", 5/32", and 3/16", plus 7/32" stop sleeves. Best Use: Swages 1/16", 3/32", 1/8", 5/32", and 3/16" oval and stop sleeves, plus 7/32" stop sleeves.
Part No: NO.1 SC
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Landing Nets
Poly Bait Net Bow: 8". Handle: 18".
Part No: NP188
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Bomar & Nibo Hatch Parts
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
Part No: NS2070--EX
|
|
|
|
Screen fits N1080-10A, N2080-10A, N0080-10FX, N0080-10FXN.
Part No: NS2080--EX
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM- 8
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-10
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-12
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-14
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-6
|
|
|
|
Home -> Fishing -> Fishing Accessories
High-carbon stainless-steel blade, scalloped for consistent sharpness, makes this 3-1/4" net knife ideal for recreational or commercial anglers. Handle: Polypropylene.
Part No: NTL-24C
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Light Assemblies for Navigator Bulkhead-Mount Compass
Light Assemblies ONLY for Navigator Bulkhead-Mount Compass.
Part No: NV-0044XSP
|
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Light Assemblies for Navigator Bulkhead-Mount Compass
Light Assemblies ONLY for Navigator Bulkhead-Mount Compass.
Part No: NV-0045XSP
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: NY0101
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: NY0102
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: NY0103
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: NY0105
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Nonflammable, phosphoric acid-based formula deep cleans aluminum prior to welding, painting or subsequent treatments.
Part No: O73001/1GLUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->Alodine 1201 Primer (Professional Application Only)
Gold, chromic acid conversion coating for aluminum prevents corrosion.
Part No: O73003/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->Griptex Non-Skid - (Professional Application Only)
Use on smooth decks, gelcoat decks with non-skid patterns and previously painted non-skid areas.
Part No: O73012/1QTAL
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->Griptex Non-Skid - (Professional Application Only)
Use on smooth decks, gelcoat decks with non-skid patterns and previously painted non-skid areas.
Part No: O73013/1QTAL
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->AwlCare Polymer Sealer
A non-abrasive, synthetic polymer that is applied by hand and formulated to clean and protect AwlGrip topcoats. Contains no harsh abrasives, will not scratch the painted surface. Leaves a non-yellowing, protective polymer coating. Lasts through multiple washings. Removes mild stains such as water spots and diesel soot.
Part No: O73240/1PTUS
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Patch any inflatable boat in just five minutes Patch any inflatable watercraft in just five minutes! No messy flammable cement or 12-hour cure time. Includes everything you need: patches, squeegee and alcohol swabs, all packaged in secure waterproof lock bag.
Part No: OA1001
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Mako Mocs
With enhanced comfort and support, the Mako is the world's first boat shoe as rugged as a shark. Men's Half Sizes: 8 - 12, 13. Colors: Coffee, Oak, Amaretto. Stain and Water Resistant Leather for Durable and Lasting Wear. 360° Lacing System™ with Rust Proof Eyelets for a Secure Fit. Padded Tongue and Collar for Added Comfort Around the Foot. Shock Absorbing EVA Heel Cup with Heel Pillow for Added Comfort. Dual-Density Bottom with Cushion Midsole for Under Foot Comfort.
Part No: OAK-10
|
|
|
