Welcome! Please Sign-In
Top Sellers
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
ARS-5 Advanced Regulator from BALMAR
ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
Mercury Outboards, 2001-2005, All 2-stroke models, 2.5-250HP from SELOC PUBLICATIONS
Mercury Outboards, 2001-2005, All 2-stroke models, 2.5-250HP from SELOC PUBLICATIONS
SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. SELOC has been the leading source of how-to information for the marine industry since 1974. This manual covers Mercury Outboard, all 2-stroke models, 2. 5-250HP from 2001-2005. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables .
Flex Trim - Black 1/2" opening from TACO PRODUCTS
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
Deck Mate 25 Boat Anchor Windlass from POWERWINCH
Deck Mate 25 Boat Anchor Windlass from POWERWINCH
Compact, deck-mounted windlass has power up/free-fall down capabilities and includes a built in light for added convenience. With low power draw and free fall deployment, this anchor winch puts less stress on your battery for longer battery life. Its small footprint takes up less deck space to mount and the spur gear train allows fast retrieval speeds and minimal current draw. Gear feature prevents rope from over running during anchor deployment. Style: Horizontal . Boat Length: Up to 25'' .
5/16" Wire Rope Clamp from SEADOG
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
Mercury/Mariner Outboards, 1990-2000, All 2-stroke engines, 2.5-275HP from SELOC PUBLICATIONS
Mercury/Mariner Outboards, 1990-2000, All 2-stroke engines, 2.5-275HP from SELOC PUBLICATIONS
SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This manual covers Mercury/Mariner Outboards, all 2-stroke engines, 2. 5-275HP from 1990-2000. Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
5"-6" Bonnet Set from WMH TOOL GROUP
5"-6" Bonnet Set from WMH TOOL GROUP
For final buff out, use the wool polishing bonnet included in this Seven Piece Bonnet Set which includes four applicators, two terry cloth, one wool and one microfiber polishing bonnet.
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
Fuel Line - 5/16" - Universal from MOELLER
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.
Fuel Hose, Type B-2 5/16" from MOELLER
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".

5" from NAVPOD, 25" from NAVPOD, 5208 from NAVPOD, 5H from NAVPOD

Power Pre-Cut for a Raymarine ST60 or ST70, Surface Mounted from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Pre-Cut for Raymarine ST60 or ST70
Pre-Cut for Raymarine ST60 or ST70 Surface mounted. Versitile 20/40 Swivel Base, Choice of 20 or 40 Degree tilt angle. Allows left to right swivel action.
Part No: PP4301
Pre-Cut for Raymarine ST290 from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP4302
UnCut Flush 10.5 W x 7.75 H from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP4800
Pre-Cut for Raymarine A65 from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP4801
PowerPod, Pre-cut for Garmin 4008/4208, 13" x 12" x 9.5" from NAVPOD Home -> Electronics -> Radars -> Radar Accessories->Grand Prix Series PowerPods
Extremely durable Grand Prix Series features a new industrial design with a double-seal gasket for improved watertight integrity. Feature a 20/40-degree base for your choice of mounting angles (20 degrees tilt for on-dash mounting, 40 degrees for overhead mounting), stainless-steel tamperproof fasteners, super-strong swivel tube, extra-large Teflon and EPDM swivel interface. Constructed of rugged ABS plastic.
Part No: PP4802
Pre-Cut for Garmin 5008/5208 from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP4804
Pre-Cut for Raymarine C70 from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP4805
Power Grand Prix UnCut from NAVPOD Home -> Electronics -> Boat Instruments->Un-Cut Flush Front Grand Prix Series
9. 5" Un-Cut Flush Front. Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners.
Part No: PP5030
Power PreCut for Raymarine C120W from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C120W
For overhead or dash mounting of System NavPods.
Part No: PP5031
Pre-Cut for Furuno MFD12 from NAVPOD Home -> Electronics -> Boat Instruments->PreCut Furuno MFD12
The Grand Prix series has double seal for watertight intergrity, tamperproof fasteners and polished stainless steel.
Part No: PP5033
UnCut Flush 12.5 W x 8.5 H from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP5050
PowerPod, Pre-cut for Raymarine 8" C80 15.125" x 13" x 10" from NAVPOD Home -> Electronics -> Radars -> Radar Accessories->Grand Prix Series PowerPods
Extremely durable Grand Prix Series features a new industrial design with a double-seal gasket for improved watertight integrity. Feature a 20/40-degree base for your choice of mounting angles (20 degrees tilt for on-dash mounting, 40 degrees for overhead mounting), stainless-steel tamperproof fasteners, super-strong swivel tube, extra-large Teflon and EPDM swivel interface. Constructed of rugged ABS plastic.
Part No: PP5051
Power Precut For Raymarine C90W from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C90W
For overhead or dash mounting of System NavPods.
Part No: PP5052
UnCut Flush 14 W x 10.5 H from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP5060
PowerPod, Pre-cut for Raymarine 12" C120 16.625" x 15.125" x 11.25" from NAVPOD Home -> Electronics -> Radars -> Radar Accessories->Grand Prix Series PowerPods
Extremely durable Grand Prix Series features a new industrial design with a double-seal gasket for improved watertight integrity. Feature a 20/40-degree base for your choice of mounting angles (20 degrees tilt for on-dash mounting, 40 degrees for overhead mounting), stainless-steel tamperproof fasteners, super-strong swivel tube, extra-large Teflon and EPDM swivel interface. Constructed of rugged ABS plastic.
Part No: PP5061
UnCut Flush 14.5 W x 9.5H from NAVPOD Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP5600
Prop Removal Kit from NATIONAL PRODUCTS Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->3 and 4 Blade Prop Removal Kit or Tool
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.
Part No: PPF-101
Pro-Pull Tool Only from NATIONAL PRODUCTS Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->3 and 4 Blade Prop Removal Kit or Tool
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.
Part No: PPF-102
Prop Puller for Shafts 1" to 1-1/2", 3/4" Min Clearance from NATIONAL PRODUCTS Home -> Engine Systems -> Propellers & Drive Trains->Inboard Prop Removal Tool
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.
Part No: PPF-103
Prop Puller for Shafts 1-5/8" to 2", 13/16" Min Clearance from NATIONAL PRODUCTS Home -> Engine Systems -> Propellers & Drive Trains->Inboard Prop Removal Tool
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.
Part No: PPF-107
Prop Nut Tool, OB & I/O from NATIONAL PRODUCTS Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts
Six solid-bronze tools in one, to help you to remove and install propeller nuts, cotter pins and prop nut keepers. Works on most larger outboards including Mercury/Mariner 75hp and up, Suzuki and Yamaha 55hp and up, and OMC 60hp and up. Fits most stern drives with 1 1/16'' or 1 1/4'' prop nuts.
Part No: PPF-108
PP Varnish Extra from EPIFANES Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
It can be used on all types of interior and exterior wood as an insulation coat, sealer, or filling coat for one-component or two component synthetic or polyester based varnish systems. PP Varnish Extra is an excellent insulating sealer for oily, greasy and vaporous woods such as Teak and Iroco. For maximum UV resistance it is recommended to topcoat with two or more coats of Epifanes Clear Varnish, Epifanes Wood finish Gloss, or Epifanes Polyurethane Clear Gloss Finish. Brush, roll or spray.
Part No: PPX.2000
Fender Hanger for 1" Pipe Rail, Black from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->Fender Hangers
Designed not to damage varnished or painted handrails, these fender hangers work as good as they look! They have a core structure of durable aluminum. Outer and inner surfaces are covered with premium-grade leather that is specially treated to be maintenance free and never need oiling in the marine environment. Offered in your choice of black or brown, each includes a nickel-plated brass grommet that accepts up to 5/8" line.
Part No: PR100BL
Fender Hanger for 1" Pipe Rail, Brown from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->Fender Hangers
Designed not to damage varnished or painted handrails, these fender hangers work as good as they look! They have a core structure of durable aluminum. Outer and inner surfaces are covered with premium-grade leather that is specially treated to be maintenance free and never need oiling in the marine environment. Offered in your choice of black or brown, each includes a nickel-plated brass grommet that accepts up to 5/8" line.
Part No: PR100BR
Fender Hanger for 1-1/4" Pipe Rail, Black from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->Fender Hangers
Designed not to damage varnished or painted handrails, these fender hangers work as good as they look! They have a core structure of durable aluminum. Outer and inner surfaces are covered with premium-grade leather that is specially treated to be maintenance free and never need oiling in the marine environment. Offered in your choice of black or brown, each includes a nickel-plated brass grommet that accepts up to 5/8" line.
Part No: PR125BL
Fender Hanger for 1-1/4" Pipe Rail, Brown from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->Fender Hangers
Designed not to damage varnished or painted handrails, these fender hangers work as good as they look! They have a core structure of durable aluminum. Outer and inner surfaces are covered with premium-grade leather that is specially treated to be maintenance free and never need oiling in the marine environment. Offered in your choice of black or brown, each includes a nickel-plated brass grommet that accepts up to 5/8" line.
Part No: PR125BR
Fender Hanger for 1-1/2" Pipe Rail, Black from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->Fender Hangers
Designed not to damage varnished or painted handrails, these fender hangers work as good as they look! They have a core structure of durable aluminum. Outer and inner surfaces are covered with premium-grade leather that is specially treated to be maintenance free and never need oiling in the marine environment. Offered in your choice of black or brown, each includes a nickel-plated brass grommet that accepts up to 5/8" line.
Part No: PR150BL
Fender Hanger for 1-1/2" Pipe Rail, Brown from MEGAFEND Home -> Anchor & Docking -> Fenders & Docking->Fender Hangers
Designed not to damage varnished or painted handrails, these fender hangers work as good as they look! They have a core structure of durable aluminum. Outer and inner surfaces are covered with premium-grade leather that is specially treated to be maintenance free and never need oiling in the marine environment. Offered in your choice of black or brown, each includes a nickel-plated brass grommet that accepts up to 5/8" line.
Part No: PR150BR
Holder For Spare Propeller from T-H MARINE Home -> Engine Systems -> Propellers & Drive Trains
A simple and safe device for securing a spare propeller in any location. The base mounts to any flat surface and retains a stainless nut that the graphite bolt screws into. Holds any size propeller and its thrust washers.
Part No: PRB-1-DP
Programmable Timer from FLEXCHARGE Features a programmable memory capable of eight independent ON/OFF events. Example: Use one ON event to have a light come on at 7pm every day, then use seven different OFF events to turn it OFF at a different time every day. Runs on 12VDC and features manual ON/OFF override, easy-to-use terminal blocks for simple installation and an internal battery to maintain clock and programmed memory for up to three months with no external power. Controls inductive loads to 8A and resistive loads to 16A.
Part No: PRGTMR12V
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12