Top Sellers
Lightweight Dock Cart from KART-AHOY
Compact, lightweight, affordable cart features 12" plastic wheels that roll smoothly over bumpy docks. Extra cargo baskets can be stacked on top for added capacity. For storage, the plastic basket folds flat and the powdercoat steel handle detaches. Material: Plastic/steel . Maximum Load Capacity: 100lb. . Cargo Area: 2. 71cu ft. . Wheel Type/Size: Plastic, 12" . Dimensions: 23.
|
Dock Buddy Dock Line, 4ft., Black from GREENFIELD PRODUCTS
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
|
6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
|
Dock Line Holding Tool from SHURHOLD PRODUCTS
Use it to easily loop your dock lines around posts or pilings. Especially useful at low tide when the piling is too high to reach. Mounts to any boat pole.
|
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
The P750 de-ices diameter of approximately 60 feet Prevent damaging ice formation around your boat’s hull with a 3/4 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.
|
Super Kart Ahoy from KART-AHOY
Identical dimensions to the Lightweight Dock Cart (Model 412403), but with larger diameter wheels for added mobility and greater loadbearing capacity. Handles 185lb. of payload and boasts 15" wheels. The handle and cargo baskets are interchangeable between the two models. Recommended for freshwater use only. Material: Plastic/steel . Maximum Load Capacity: 185lb. . Cargo Area: 2. 71cu. ft.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
Alcohol/Electric Stove - 2-Burner from ORIGO
Safety and convenience at the dock or underway. These flush mount stoves allow you to cook with shore power when dockside or alcohol when underway. They feature electronic touch pads to control electric cooking elements. The stovetop easily flips up to allow access to remove the fuel canisters for simple filling. Fuel/Power: Alcohol/Electric Safety Features: Closed lid keeps On/Off Switch set to off. Configuration: Double Burner Cooktop Overall Dimensions: 14 7/8'' W x 6 3/8''D x 24 1/2''L .
|
Folding Dock Cart from BEST WHEELS PRODUCTS
Lightweight, folding cart folds flat to 2. 5/16" for compact storage and converts to working position with the push of a button. Tough with a hauling capacity of 175lb. and 7" non-marking, shock-absorbing tires. Aluminum telescoping frame Weighs 8.
|
Dock Box or Cooler Chocks from AFI
Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
|
Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.
|
Foldit Cart, Blue Stripe with Blue Wheels from TIPKE MANUFACTURING
Its solidly built from corrosion-resistant, aircraft-grade aluminum and holds 330lb. of gear. Large wheels roll easily over any terrain. Also great around the house and garden! The huge 20" dia. pneumatic tires mean stable, effortless maneuverability over ramps, docks, gravel, and uneven terrain, even with up to 330 lbs. Easy-folding, removable legs and retractable handle make for convenient storage in your car, onboard, or on the bulkhead of your boat, house, or garage .
|
|
from SUNCOR, 2'L from INTERNATIONAL DOCK
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware->Fishing Chair Rod Gimbals
Triple chrome-plated brass for high strength and superior corrosion resistance. Tubular mount fits 1" chair tubing. Flat plate model mounts under wood and plastic base chairs.
Part No: S-1936C
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware->Fishing Chair Rod Gimbals
Triple chrome-plated brass for high strength and superior corrosion resistance. Tubular mount fits 1" chair tubing. Flat plate model mounts under wood and plastic base chairs.
Part No: S-1937C
|
|
|
|
Home -> Fishing -> Fishing Accessories
East to remove stainless steel rod holder adapts to any part of your boat and leaves no projecting hardware Rubber tip protects rod. Bracket is 3 3/4" W x 4"L.
Part No: S-1957CBLUE
|
|
|
|
Home -> Safety -> Vapor Detectors -> Fuel Vapor Detectors
Allows you to turn the propane on and off and continuously monitors the system for leaks. In the event of a leak, the unit automatically shuts off the flow of gas and sounds an alarm. Includes a two-channel display module, propane sensor, and automatic solenoid valve with 1/4'' NPT ports. A second sensor can be added to the system on the second channel. Sensors have 20' leads.
Part No: S-2A
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-3
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Wide-Step Dock Ladders
Heavy-duty aluminum dock ladder features extra wide steps for increased security under foot. The 17"L x 4"W steps have slightly rounded edges so you feel comfortable and stable when climbing in and out of the water. Grooved surface offers traction, yet still remains kind to your feet. 12" vertical spacing between steps. Standard style for permanent mounting on a dock or seawall. max boarding capacity. Material: 1-1/4" ID 6063 T-5 marine-grade aluminum.
Part No: S-3WS
|
|
|
|
Effectively filter to 28 microns and won't filter out two-cycle oil, ensuring proper engine lubricity.
Part No: S-4031P
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Snaps - Fast Eye
316 Stainless Steel.
Part No: S-4032P
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Snaps - Fast Eye
316 Stainless Steel.
Part No: S-4033P
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Snaps - Fast Eye
316 Stainless Steel.
Part No: S-4034P
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-4WS
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-5
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Explorer Compasses
Explorer Compasses This series is for fast runabouts, bass boats, center consoles and sportboats. Three mounting options enable you to select the style appropriate for your needs. Low profile, surface-mount models fit in tight spaces, and feature a quick-release bracket. Features include built-in compensator magnets, 12V DC night lighting, jewel and steel pivot movements and movable sunshades. 2 3/4" apparent, direct-reading cards. : 2 3/4" or 3" . Card Type: Direct or Dual .
Part No: S-53
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Explorer Compasses
Explorer Compasses This series is for fast runabouts, bass boats, center consoles and sportboats. Three mounting options enable you to select the style appropriate for your needs. Low profile, surface-mount models fit in tight spaces, and feature a quick-release bracket. Features include built-in compensator magnets, 12V DC night lighting, jewel and steel pivot movements and movable sunshades. 2 3/4" apparent, direct-reading cards. : 2 3/4" or 3" . Card Type: Direct or Dual .
Part No: S-53G
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Wide-Step Dock Ladders
Heavy-duty aluminum dock ladder features extra wide steps for increased security under foot. The 17"L x 4"W steps have slightly rounded edges so you feel comfortable and stable when climbing in and out of the water. Grooved surface offers traction, yet still remains kind to your feet. 12" vertical spacing between steps. Standard style for permanent mounting on a dock or seawall. max boarding capacity. Material: 1-1/4" ID 6063 T-5 marine-grade aluminum.
Part No: S-5WS
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Groco Service Kits and Repair Parts
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: S-64-A
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-7
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Side Mount Rod Holders
Rod holders mount on the side of your boat so you can easily track if you've got a bite. Black or White Nylon Liner. 304 stainless bracket. 4 1/8"W x 9 1/4"L . 1 5/8" tube ID . Uses #10 fasteners (not included).
Part No: S-7001CBLUE
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Side Mount Rod Holders
Rod holders mount on the side of your boat so you can easily track if you've got a bite. Black or White Nylon Liner. 304 stainless bracket. 4 1/8"W x 9 1/4"L . 1 5/8" tube ID . Uses #10 fasteners (not included).
Part No: S-7002CBLUE
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Groco Service Kits and Repair Parts
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: S-751-A
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Wide-Step Dock Ladders
Heavy-duty aluminum dock ladder features extra wide steps for increased security under foot. The 17"L x 4"W steps have slightly rounded edges so you feel comfortable and stable when climbing in and out of the water. Grooved surface offers traction, yet still remains kind to your feet. 12" vertical spacing between steps. Standard style for permanent mounting on a dock or seawall. max boarding capacity. Material: 1-1/4" ID 6063 T-5 marine-grade aluminum.
Part No: S-7WS
|
|
|
|
Home -> Plumbing -> Fittings & Valves->VD-2500 Strainer Parts
VD-2500 Strainer Parts.
Part No: S-85-L
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Groco Service Kits and Repair Parts
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: S-86-A
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Voyager Compasses
Excellent, yet economical compasses for powerboats or sailboats. Flat card models feature PowerDamp, a lightweight baffle that eliminates spinning and dial jumping for easy readability, even at high speeds. All Voyager models feature precision steel pivot and sapphire jewel bearings, internal gimbal, built-in compensator magnets, 12V DC night lighting and movable sun shields. 3" apparent flat or domed cards. Apparent Card Dia. Lubberlines: Yes . Clinometer: No . Cover/Shield: Yes .
Part No: S-87
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Voyager Compasses
Excellent, yet economical compasses for powerboats or sailboats. Flat card models feature PowerDamp, a lightweight baffle that eliminates spinning and dial jumping for easy readability, even at high speeds. All Voyager models feature precision steel pivot and sapphire jewel bearings, internal gimbal, built-in compensator magnets, 12V DC night lighting and movable sun shields. 3" apparent flat or domed cards. Apparent Card Dia. Lubberlines: Yes . Clinometer: No . Cover/Shield: Yes .
Part No: S-87W
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Stainless Steel Drain Fittings
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.
Part No: S00-0101-UP-R
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Stainless Steel Drain Fittings
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.
Part No: S00-0104-UP-R
|
|
|
|
Home -> Ventilation -> Blowers & Heaters -> Cabin Heaters
The direct-venting, ABYC-certified design isolates all combustion air and eliminates the possibility of oxygen depletion, dangerous combustion gas emissions or condensation. It includes thermocouple protection and a low amp 12V DC blower. This ready-to-install kit also includes 28" of double-walled flex exhaust hose, deck cap, backing plate and a weather gasket. Heat Source: Low-pressure propane . Btu: Low 6,500; High 9,000. Material: Stainless steel . 5"W x 14"H x 5.
Part No: S00-DV9000
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Suncor Stainless Steel Anchor Shackle
Anchor Shackle, 316NM made of stainless steel with oversized screw pin.
Part No: S0116-0013
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Suncor Stainless Steel Anchor Shackle
Anchor Shackle, 316NM made of stainless steel with oversized screw pin.
Part No: S0116-0016
|
|
|