Welcome! Please Sign-In
Top Sellers
Big-T Rotary Helm from TELEFLEX
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
BayStar Helm Seal Kits from TELEFLEX
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
SeaStar Helm Seal Kit from TELEFLEX
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
33C Red Jacket Cable, 18' from TELEFLEX
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
IN-Series Dual Station Kit/ 30 Series from TELEFLEX
IN-Series Dual Station Kit/ 30 Series from TELEFLEX
S-controls In-Series Dual Station Kit.
3300 Pivot Kit, Brass from TELEFLEX
3300 Pivot Kit, Brass from TELEFLEX
3300 Pivot Kit, Brass.
SeaStar Filler Kit from TELEFLEX
SeaStar Filler Kit from TELEFLEX
SeaStar hydraulic steering systems require the use of a special high-quality hydraulic fluid meeting MIL SPEC H-5606 C.
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
Premium Series Fuel Gauge from TELEFLEX
Premium Series Fuel Gauge from TELEFLEX
.
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
Oil Pressure Gauge, 0-80 psi from TELEFLEX
Oil Pressure Gauge, 0-80 psi from TELEFLEX
OIL PRESSURE, 0-80 PSI AMEGA 2.
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .

SS from TELEFLEX, Clevis Kit from TELEFLEX, 8" Standoff from TELEFLEX

This site contains about 37,785 documents.
View by:
Title  |  Category  |  Manufacturer  |  Part No  |  Price
Page:   1   100   230   240   250   260   270   280   290   300   310   319   320   321   322   323   324   325   326   327   328   329   330   331   332   333   334   335   336   337   338   339   340   341   342   343   344   345   346   347   348   350   360   370   380   390   400   410   420   430   500   600   700   800   900   1,000   1,100   1,200   1,260 
(2) SA-C001 - Peru to Puerto Vallarta to Puerto Bolivar from C-MAP Home -> Electronics -> Global Positioning Systems->C-MAP C-Card, Central & South America
Central & South America No Description 1 M-NA-C402 PENSACOLA BAY TO GULF OF HONDURAS 2 M-SA-C001 PERU TO PTO VALLARTA TO PTO BOLIVAR 3 M-SA-C002 CHILE 4 M-SA-C003 RIO DE JANEIRO TO CAPE HORN 5 M-SA-C004 PUERTO BOLIVAR TO RIO DE JANEIRO 6 M-NA-C501 CUBA TO TRINIDAD AND TOBAGO 7 M-NA-C502 WESTERN CARIBBEAN SEA 8 M-NA-C309 JACKSONVILLE TO FORT MYERS 9 M-NA-C306 BAHAMAS 10 M-NA-C311 CUBA, JAMAICA AND THE CAYMAN ISLANDS.
Part No: SA-C001
(4) SA-C004 - Rio de Janeiro to Cape Horn from C-MAP Home -> Electronics -> Global Positioning Systems->C-MAP C-Card, Central & South America
Central & South America No Description 1 M-NA-C402 PENSACOLA BAY TO GULF OF HONDURAS 2 M-SA-C001 PERU TO PTO VALLARTA TO PTO BOLIVAR 3 M-SA-C002 CHILE 4 M-SA-C003 RIO DE JANEIRO TO CAPE HORN 5 M-SA-C004 PUERTO BOLIVAR TO RIO DE JANEIRO 6 M-NA-C501 CUBA TO TRINIDAD AND TOBAGO 7 M-NA-C502 WESTERN CARIBBEAN SEA 8 M-NA-C309 JACKSONVILLE TO FORT MYERS 9 M-NA-C306 BAHAMAS 10 M-NA-C311 CUBA, JAMAICA AND THE CAYMAN ISLANDS.
Part No: SA-C003
(5) SA-C004 - Puerto Bolivar to Rio de Janeiro from C-MAP Home -> Electronics -> Global Positioning Systems->C-MAP C-Card, Central & South America
Central & South America No Description 1 M-NA-C402 PENSACOLA BAY TO GULF OF HONDURAS 2 M-SA-C001 PERU TO PTO VALLARTA TO PTO BOLIVAR 3 M-SA-C002 CHILE 4 M-SA-C003 RIO DE JANEIRO TO CAPE HORN 5 M-SA-C004 PUERTO BOLIVAR TO RIO DE JANEIRO 6 M-NA-C501 CUBA TO TRINIDAD AND TOBAGO 7 M-NA-C502 WESTERN CARIBBEAN SEA 8 M-NA-C309 JACKSONVILLE TO FORT MYERS 9 M-NA-C306 BAHAMAS 10 M-NA-C311 CUBA, JAMAICA AND THE CAYMAN ISLANDS.
Part No: SA-C004
Salt Away Refill - Gallon Concentrate from SALT-AWAY Home -> Engine Systems -> Engine Lubrication -> Engine Flushers->Salt Away Concentrate Refills
Extremely effective at flushing salt out of the cooling water jacket of inboards, I/Os and personal watercrafts. A special salt-removal concentrate prevents salt build up inside the engine before corrosion can begin, and provides long-lasting protection. Mixer Unit connects with garden hose on one end, and motor flusher on the other end . Concentrate is dispensed with fresh water at the appropriate ratio . 32-oz. concentrate yields eight applications for motor flush and 24' boat washdown .
Part No: SA128
Salt Away - 16oz. Spray Bottle from SALT-AWAY Home -> Engine Systems -> Engine Lubrication -> Engine Flushers->Salt Away Concentrate Refills
Extremely effective at flushing salt out of the cooling water jacket of inboards, I/Os and personal watercrafts. A special salt-removal concentrate prevents salt build up inside the engine before corrosion can begin, and provides long-lasting protection. Mixer Unit connects with garden hose on one end, and motor flusher on the other end . Concentrate is dispensed with fresh water at the appropriate ratio . 32-oz. concentrate yields eight applications for motor flush and 24' boat washdown .
Part No: SA16
Replacement Gas Sensor from MARINE TECHNLOGIES Home -> Safety -> Vapor Detectors
Replacement sensor for Marine technologies gasoline fume detector, model 172176.
Part No: SA186-S
Second Sensor from MARINE TECHNLOGIES Home -> Safety -> Vapor Detectors
For use with the Gasoline Fume Detector, as a second station sensor.
Part No: SA186SB
Surface-Mount Gasoline Fume Detector from MARINE TECHNLOGIES Home -> Safety -> Vapor Detectors -> Fuel Vapor Detectors->Gasoline Fume Detectors
Here’s affordable protection from a UL Marine-listed detector designed to warn you of explosive gas accumulation. With a warning light and audible alarm, the detector alerts you to gasoline fumes, hydrogen gas from batteries, propane, alcohol, acetone and other potentially explosive fumes at 20% of their explosive level. Features one-touch On/Off/Test operation. Alarms: Warning light and audible alarm. Minimum Vapor Level for Activation: 20% of Lower Explosive Limit . Controls: ON/OFF/Test .
Part No: SA1XL
Clamp Block - Outboard, 2 5/8" Standoff from TELEFLEX Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27055P
Clamp Block - Outboard, 2 5/8" Standoff, SS from TELEFLEX Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27149P
Universal Tie Bar Kit from TELEFLEX Home -> Engine Systems -> Control Systems
For dual outboard connections. Includes heavy-duty tie bar and all fasteners. Max length 25 1/2''.
Part No: SA27252P
15° Bevel Splashwell Mounting Kit from TELEFLEX Home -> Engine Systems -> Steering Systems->Splashwell Mounting Kits
Add this kit to make the splashwell the point at which the pushpull cable is mounted. Ball and socket motion aligns the steering cable automatically. Corrosion-resistant. Includes threaded tube, splashwell guard and mounting hardware.
Part No: SA27253P
90° Straight Splashwell Mounting Kit from TELEFLEX Home -> Engine Systems -> Steering Systems->Splashwell Mounting Kits
Add this kit to make the splashwell the point at which the pushpull cable is mounted. Ball and socket motion aligns the steering cable automatically. Corrosion-resistant. Includes threaded tube, splashwell guard and mounting hardware.
Part No: SA27254P
Stainless Transom Support Master Mounting Kit from TELEFLEX Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Transom Support Master Mounting Kits
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
Part No: SA27255P
Aluminum Transom Support Master Mounting Kit from TELEFLEX Home -> Engine Systems -> Steering Systems->Transom Support Master Mounting Kits
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
Part No: SA27256P
Support Tube - Aluminum from TELEFLEX Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Support Tube
Smooth aluminum tube supports the end of the steering cable before it attaches to the engine. Non threaded for clamp-block applications. Aluminum or stainless.
Part No: SA27274P
Support Tube - Stainless Steel from TELEFLEX Home -> Engine Systems -> Steering Systems->Support Tube
Smooth aluminum tube supports the end of the steering cable before it attaches to the engine. Non threaded for clamp-block applications. Aluminum or stainless.
Part No: SA27275P
Ball Joint Rod End - Steel from TELEFLEX Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Ball Joint Rod Ends
For 1/2"-20 telescopics.
Part No: SA27276P
Ball Joint Rod End - Stainless from TELEFLEX Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Ball Joint Rod Ends
For 1/2"-20 telescopics.
Part No: SA27277P
Clevis Kit from TELEFLEX Home -> Engine Systems -> Steering Systems
The bolts and clevis that you need to connect the steering cable to your engine.
Part No: SA27314P
Link Arm Kit from TELEFLEX Home -> Engine Systems -> Steering Systems
This link arm is designed to return to the motor-steering attachment point for through-the-tilt-tube mounting applications, which are common in modern outboards.
Part No: SA27361P
Clamp Block - Inboard, 2 5/8" Standoff from TELEFLEX Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27578P
Clamp Block - Inboard, 4 7/8" Standoff from TELEFLEX Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27579P
Galvanized Shark Anchor, 66lb., for Boats up to 60' from ANCHORLIFT USA Home -> Anchor & Docking -> Anchors -> Nonhinged Plow Anchors->Shark™ Anchors
Extensive tests by the manufacturer in the frigid waters of the North Sea document that these anchors are exceptionally effective in a wide variety of sea beds, remain stable in all tidal conditions and hold weight up to 35% more than other anchors of similar design. Optional Anchorlift bow rollers provide a self-launching system that enables you to release the anchor while remaining in control at the helm.
Part No: SA30
Salt Away Refill - Quart Concentrate from SALT-AWAY Home -> Engine Systems -> Engine Lubrication -> Engine Flushers->Salt Away Concentrate Refills
Extremely effective at flushing salt out of the cooling water jacket of inboards, I/Os and personal watercrafts. A special salt-removal concentrate prevents salt build up inside the engine before corrosion can begin, and provides long-lasting protection. Mixer Unit connects with garden hose on one end, and motor flusher on the other end . Concentrate is dispensed with fresh water at the appropriate ratio . 32-oz. concentrate yields eight applications for motor flush and 24' boat washdown .
Part No: SA32
Salt-Away Salt Removing Treatment from SALT-AWAY Home -> Engine Systems -> Engine Lubrication
Extremely effective at flushing salt out of the cooling systems of outboards, inboards, I/Os and personal watercraft. A special salt-removal concentrate prevents salt build up inside the engine before overheating can begin, and provides long-lasting corrosion protection. Mixer Unit connects with garden hose on one end, and engine flusher on the other end. Can also be used to completely remove salt from the exterior of any equipment. 32oz.
Part No: SA32M
Spent Travel Tube from TELEFLEX Home -> Engine Systems -> Steering Systems
Spent travel tube with nut Fits Safe-T and Big-T.
Part No: SA35680P
Splashwell Mounting Kit Replacement Tube from TELEFLEX Home -> Engine Systems -> Steering Systems->Splashwell Mounting Kits
Add this kit to make the splashwell the point at which the pushpull cable is mounted. Ball and socket motion aligns the steering cable automatically. Corrosion-resistant. Includes threaded tube, splashwell guard and mounting hardware.
Part No: SA36316P
SA40 - Saltiga® Saltwater Conventional Reel, 6BB, 1RB, 4.9:1, 24.30 oz. from DAIWA RODS/REELS Home -> Fishing -> Reels->Saltiga® Saltwater Conventional Reels
It also puts incredible strain on gear trains and drags designed for monofilament. That’s why these Saltiga conventionals feature beefed up components within a super-rigid frame machined from solid bar stock aluminum. Reels just don’t get any tougher. Precision machined, aircraft-grade aluminum spool for maximum casting performance and strength. Dual-system Infinite Anti-Reverse. Frame and sideplates machined from solid, aircraft-grade bar stock aluminum, hard anodized to prevent corrosion.
Part No: SA40
SA50 - Saltiga® Saltwater Conventional Reel, 6BB, 1RB, 4.9:1, 25.00 oz. from DAIWA RODS/REELS Home -> Fishing -> Reels->Saltiga® Saltwater Conventional Reels
It also puts incredible strain on gear trains and drags designed for monofilament. That’s why these Saltiga conventionals feature beefed up components within a super-rigid frame machined from solid bar stock aluminum. Reels just don’t get any tougher. Precision machined, aircraft-grade aluminum spool for maximum casting performance and strength. Dual-system Infinite Anti-Reverse. Frame and sideplates machined from solid, aircraft-grade bar stock aluminum, hard anodized to prevent corrosion.
Part No: SA50
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...		    Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...		    Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11