Top Sellers
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
|
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
Water Temperature Gauge, IB, SD from TELEFLEX
Light grey dial, black graduations and numerals, white pointer staff. Scratch-resistant curved glass lenses with black, near flush bezels. U. S. and metric scales with ISO symbols where appropriate.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
Fuse Block, 10 Circuit, 3.75"L x 3.4"W x 0.8"H from COLE HERSEE
Recessed fuse contacts, no cover required. Black thermoplastic.
|
|
36" x 12" from HOLT ALLEN, 46" x 10" from HOLT ALLEN, Black from TELEFLEX
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->Adjustable Boat Stands - Sail Boats
These adjustable stands support and stabilize the weight of a boat on land. Angled stands are designed for sailboat and deep-V motor boat hulls. Can be nested for storage. A safety-chain notch is designed to accept 3/16'' galvanized chain. Bow-heavy boats require a Vee at the bow. Flat style swivels to support most hulls. Every stand features: Easy-to-use handles for quick and secure adjustment. Totally submerged in paint to ensure rust resistance inside and out. .
Part No: SB-2V
|
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->Adjustable Boat Stands - Sail Boats
These adjustable stands support and stabilize the weight of a boat on land. Angled stands are designed for sailboat and deep-V motor boat hulls. Can be nested for storage. A safety-chain notch is designed to accept 3/16'' galvanized chain. Bow-heavy boats require a Vee at the bow. Flat style swivels to support most hulls. Every stand features: Easy-to-use handles for quick and secure adjustment. Totally submerged in paint to ensure rust resistance inside and out. .
Part No: SB-3FL
|
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Boat Stands->Adjustable Boat Stands - Sail Boats
These adjustable stands support and stabilize the weight of a boat on land. Angled stands are designed for sailboat and deep-V motor boat hulls. Can be nested for storage. A safety-chain notch is designed to accept 3/16'' galvanized chain. Bow-heavy boats require a Vee at the bow. Flat style swivels to support most hulls. Every stand features: Easy-to-use handles for quick and secure adjustment. Totally submerged in paint to ensure rust resistance inside and out. .
Part No: SB-3V
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories
Soft 3'' x 18'' nylon covered foam fenders have large suction cups to secure to your craft.
Part No: SB-4
|
|
|
|
Home -> Cordage -> Rigging Products->Spreader Boots
Protect your sails with these unique chafe guards. Made of tough polyester guaranteed not to deteriorate in the sun for five years! Attach securely on spreaders with handy webbing/buckle arrangement.
Part No: SB1.1
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Spreader Boots
Protect your sails with these unique chafe guards. Made of tough polyester guaranteed not to deteriorate in the sun for five years! Attach securely on spreaders with handy webbing/buckle arrangement.
Part No: SB15.1
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2102
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2103
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2104
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2111
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2112
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2202
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2302
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2402
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2502
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2602
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering
A direct replacement for NFB 4. 2 Rotary system. For use with virtually all of today’s outboard boats with wheels to 16". 4. 2 turns lock-to-lock. Uses QC (SSC62) steering cables.
Part No: SB27150P
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SB27265P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SB27268P
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Safe-T and BFB Bezel Kits
Replacement helm for Safe-T "TS" system Cable Type: QC II cable not included Mounting Hardware: Included Steering Wheel: Up to 16".
Part No: SB27483P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T and BFB Bezel Kits
Replacement helm for Safe-T "TS" system Cable Type: QC II cable not included Mounting Hardware: Included Steering Wheel: Up to 16".
Part No: SB27484P
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2802
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags
Holt bouyancy bags are made of tough, heavy-duty, 0. 16" PVC - shaped and finished to fit snug in your dinghy.
Part No: SB2902
|
|
|
|
Home -> Safety -> First Aid & Medical
Seasick children? Use Sea-Band for non-drug, non-drowsy relief Soft elastic wrist bands apply pressure on the Nei Kuan acupressure point on each wrist to help treat symptoms of motion sickness, including dizziness and nausea. Since they are drug-free, the bands are safe for children and don't cause the side effects often associated with anti-nausea drugs. One pair.
Part No: SB2Z-C
|
|
|
|
Home -> Engine Systems -> Steering Systems->Back Mount Rack Helm & Bezel Kit
Single helm replaces 1984 to date Teleflex “The Rack” steering helm without dash modification. For use in almost all sterndrive, inboard and other power-assisted applications where No Feedback steering is not required. Back mount design allows fast and easy installation in dash. Four turns lock-to-lock, standard 3/4" tapered steering shaft. Requires bezel kit, sold separately. Boat Type: Inboards and power-assisted sterndrives . Steering Type: Rack and pinion . Turns Lock-to-Lock: 4 .
Part No: SB39526P
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Plastic Bilge Strainers
Built-in check valve prevents water from draining back into bilge. Molded plastic with synthetic rubber valve. Screen may be removed for cleaning. Fits 1" and 1-1/2" hose.
Part No: SB4222
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Spreader Boots
Protect your sails with these unique chafe guards. Made of tough polyester guaranteed not to deteriorate in the sun for five years! Attach securely on spreaders with handy webbing/buckle arrangement.
Part No: SB58.58
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Plastic Bilge Strainers
Built-in check valve prevents water from draining back into bilge. Molded plastic with synthetic rubber valve. Screen may be removed for cleaning. Fits 1" and 1-1/2" hose.
Part No: SB5865
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Collapsible Box Anchor
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Part No: SBA
|
|
|
|
Home -> Books & Videos -> Cruising Guides -> Intracoastal Waterway->Skipper Bob™ Atlantic & Gulf ICW Guides
Skipper Bob and his wife Elaine cruised more than 44,000 miles on the East Coast of the United States. Their travels have taken them up and down the Intracoastal Waterway numerous times. They completed the Great Loop Route and sailed to both the Bahamas and the Dry Tortugas. They took their trawler through the Erie, Rideau, Richelieu, and Trent Severn Canals. Marinas Along the Intracoastal Waterway Fuel prices, transient slip fees, long-term slip fees, do-it-yourself yards, and haul out fees.
Part No: SBAAICW
|
|
|
