Top Sellers
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
OSCO CRUSADER ELBOW FOR LOWER SWIVEL from OSCO MOTORS CORP.
Exhaust Elbow Lower Swivel - 3" Outlet Replaces Crusader #97387 .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Trailer Wheel Bearing Grease from WEST MARINE
Protects bearings against salt air, saltwater and atmospheric chemical corrosion. For wheel bearings (including disc brake wheel bearings), swivel hinges, pins, winches and anchor chain reels. Lubricates and protects bearings. Great for wheel bearings, swivel hinges, pins, and winches. Avaialble in two 3oz. cartridges, 14oz. cartridge, 1lb. can or 5. 2oz.
|
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Ropes superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
|
from SHIMANO REELS, 16" Swiveling Connector from EQUIPLITE
|
|
Home -> Fishing -> Reels->Sealine X HA/SAH Saltwater Conventiona Reels
Not only are these reels perfect for jigging or trolling, the freedom of their Free-Floating Spool lets you fire a lure or live bait with ease when an inviting target pops into view. Free-Floating Spool, separates the spool from the gear train on outcast for less friction, longer casts and faster lure drop. Three CRBB Super Corrosion Resistant Ball Bearings . Massive, six-element sealed drag, ultra-smooth and consistent . High-tensile aluminum spool, super-strong yet super light in weight .
Part No: SL-X30SHA
|
|
|
|
Home -> Fishing -> Reels->Sealine X HA/SAH Saltwater Conventiona Reels
Not only are these reels perfect for jigging or trolling, the freedom of their Free-Floating Spool lets you fire a lure or live bait with ease when an inviting target pops into view. Free-Floating Spool, separates the spool from the gear train on outcast for less friction, longer casts and faster lure drop. Three CRBB Super Corrosion Resistant Ball Bearings . Massive, six-element sealed drag, ultra-smooth and consistent . High-tensile aluminum spool, super-strong yet super light in weight .
Part No: SL-X40SHA
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts
Sleek, modern design meets high-tech functionality in SeaLife´s new DC800 8-megapixel camera. With 5 new dive-specific color correction modes, the DC800 makes it easier than ever to take sharp, colorful underwater pictures. Set the camera to Sea mode to restore lost colors typical for underwater pictures. Quick shutter response for fast action photography. Long lasting lithium battery for all day of diving. Large format continuous video recording with sound. Depth tested to 200ft.
Part No: SL180
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drinkware->Travel and Driver's Mugs
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
Part No: SLD-SDC400B
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drinkware
Stainless mug holds 16 ounces12-ounce capacity, all stainless steel mug has a nonslip base and double wall construction for superior heat and cold retention.
Part No: SLD-SDC430
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Chart Books->Atlantic Coast & Gulf Coast Chartbooks
Complete chart coverage, using two-color reproductions from the latest available government charts, on waterproof, synthetic pages. Formatted and spiral-bound, the 12" x 18" charts provide a convenient and economic cruising tool. GPS waypoint labels and Yeoman reference points on chart pages Cruising facility information and descriptions. Photos of harbors and points of interest Scale information in nautical miles and yards. Quick reference guides.
Part No: SLI
|
|
|
|
Home -> Electronics -> Boat Instruments->Self Leveling MAST Mounts
New for 2009, this Self-Leveling mast and backstay mounting system guarantees your radar will stay level with the horizon as the boat heels or rolls. The carbon fiber or stainless steel radar cradle minimizes weight while the 316 stainless steel head unit ensures durability. The patented oil dampened leveling system provides precise function even in the most adverse weather conditions.
Part No: SLM-1
|
|
|
|
Home -> Electronics -> Boat Instruments->Self Leveling MAST Mounts
New for 2009, this Self-Leveling mast and backstay mounting system guarantees your radar will stay level with the horizon as the boat heels or rolls. The carbon fiber or stainless steel radar cradle minimizes weight while the 316 stainless steel head unit ensures durability. The patented oil dampened leveling system provides precise function even in the most adverse weather conditions.
Part No: SLP-1
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring
Top-quality, noncorroding, pliable and slightly magnetic. Measures 0.
Part No: SLWQ041
|
|
|
|
Home -> Electronics -> VHF Radios & Communications->VHF Radio Holder
Keep your VHF radio safe and ready for instant useSoft, flexible PVC holders keep your handheld electronics secure, yet within reach. Fits most popular handheld VHFs and GPS. White. Small: 4 3/4"H x 2 3/4"W x 2"D.
Part No: SM VHF Holder
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-10
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-12
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-14
|
|
|
|
Home -> Cordage -> Rigging Products
Get accurate weather data, anytime, anywhere! Speedtech weather and wind meters give you the weather data you need, on the spot, wherever you are. These compact wind/weather meters offer advanced weather information in a convenient pocket knife design that fits in the palm of your hand. Measures average windspeed over 5, 10, or 13 seconds; current temperature and windchill . 589 MPH . Base Type: Threaded for tripod mount . Battery Life: 400 hours (replaceable) . Display Type: LCD .
Part No: SM-18
|
|
|
|
Home -> Electronics -> Radars->Sailboat & Trawler Mast Platform Radar Mounts
Made of powder-coated cast aluminum. The low-profile mast mount designs have swiveling feet to fit any size mast and fit all popular radars. When choosing your platform, check the diameter of your radome. Universal models fit JRC, Furuno, Sitex, Simrad and Koden.
Part No: SM-18-R
|
|
|
|
Home -> Electronics -> Radars->Sailboat & Trawler Mast Platform Radar Mounts
Made of powder-coated cast aluminum. The low-profile mast mount designs have swiveling feet to fit any size mast and fit all popular radars. When choosing your platform, check the diameter of your radome. Universal models fit JRC, Furuno, Sitex, Simrad and Koden.
Part No: SM-18-U
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps
Self-adhesive, 3-1/2" x 12" pads can be used on steps, or anywhere as a nonskid pad. Easily cut for a custom fit. White.
Part No: SM-1W
|
|
|
|
Home -> Electronics -> Radars->Sailboat & Trawler Mast Platform Radar Mounts
Made of powder-coated cast aluminum. The low-profile mast mount designs have swiveling feet to fit any size mast and fit all popular radars. When choosing your platform, check the diameter of your radome. Universal models fit JRC, Furuno, Sitex, Simrad and Koden.
Part No: SM-24-R
|
|
|
|
Home -> Electronics -> Radars->Sailboat & Trawler Mast Platform Radar Mounts
Made of powder-coated cast aluminum. The low-profile mast mount designs have swiveling feet to fit any size mast and fit all popular radars. When choosing your platform, check the diameter of your radome. Universal models fit JRC, Furuno, Sitex, Simrad and Koden.
Part No: SM-24-U
|
|
|
|
Home -> Electronics -> Radars->Sailboat & Trawler Mast Platform Radar Mounts
Made of powder-coated cast aluminum. The low-profile mast mount designs have swiveling feet to fit any size mast and fit all popular radars. When choosing your platform, check the diameter of your radome. Universal models fit JRC, Furuno, Sitex, Simrad and Koden.
Part No: SM-28-G
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Slide Mount Ladder, 3 Step Stainless steel steps slide under the platform for stowage. Requires a minimal amount of depth, fore and aft. Includes quick lock nylon strap. Features three steps. . Length deployed: 35". Length stowed: 15". Height stowed: 2. 5". Overall width: 12/5". Weight: 8.
Part No: SM-3X
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-6
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-8
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Sailboat & Trawler Mast Platform Radar Mounts
Made of powder-coated cast aluminum. The low-profile mast mount designs have swiveling feet to fit any size mast and fit all popular radars. When choosing your platform, check the diameter of your radome. Universal models fit JRC, Furuno, Sitex, Simrad and Koden.
Part No: SM-AD-ISO
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Radar Mast/Pole Mounts & Accessories
This application will fit most radomes and requires some assembly. Choose the top plate that fits your brand of antenna (each top accepts LTB option): Raymarine top plate (Model 5436290) Universal* top plate (Model 5436308) Garmin top plate (Model 6966022) . Choose secondary support: Two 48" stainless-steel struts with brackets and hardware (Model 5436324) One 48" stainless-steel strut and one rail stand-off for 1" rail and mounting hardware (Model 5436316).
Part No: SM-G18-R
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: SMALL-BL
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: SMALL-SC
|
|
|
|
Home -> Fishing -> Reels -> Spinning Reels
Incorporating the Propulsion Line Management system for longer casts and reduced backlash, the Sienna FD uses Super Stopper II for instant anti-reverse with no backplay from the diminutive 500 size for ultralight applications up to the 4000 size perfectly suited for large freshwater fish to inshore species. Propulsion Spool Lip. Graphite Frame. Graphite Sideplate. Graphite Rotor. Aluminum Spool. Varispeed Oscillation. Ported Handle Shank. Super Stopper II. Dyna-Balance. Power Roller II.
Part No: SN1000FDC
|
|
|
|
Home -> Fishing -> Reels
Incorporating the Propulsion Line Management system for longer casts and reduced backlash, the Sienna FD uses Super Stopper II for instant anti-reverse with no backplay from the diminutive 500 size for ultralight applications up to the 4000 size perfectly suited for large freshwater fish to inshore species. Propulsion Spool Lip. Graphite Frame. Graphite Sideplate. Graphite Rotor. Aluminum Spool. Varispeed Oscillation. Ported Handle Shank. Super Stopper II. Dyna-Balance. Power Roller II.
Part No: SN2500FDC
|
|
|
|
Home -> Fishing -> Reels
Incorporating the Propulsion Line Management system for longer casts and reduced backlash, the Sienna FD uses Super Stopper II for instant anti-reverse with no backplay from the diminutive 500 size for ultralight applications up to the 4000 size perfectly suited for large freshwater fish to inshore species. Propulsion Spool Lip. Graphite Frame. Graphite Sideplate. Graphite Rotor. Aluminum Spool. Varispeed Oscillation. Ported Handle Shank. Super Stopper II. Dyna-Balance. Power Roller II.
Part No: SN4000FDC
|
|
|