Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .

Thru-Deck Mark V Manual Sanitation Pump from WHALE PUMPS
Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted—and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1. 5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models . GPM: 14. 75 . Macerates: No .

Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .

Super Sub Pump 650 Auto, 650gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .

Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .

Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .

Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.

Whale Gusher 30, Double Action Twin Diaphragm Pump from WHALE PUMPS
Gusher 30 Pump The Gusher 30 is a double-action pump with twin diaphragms so it will still function if one side becomes clogged. Constructed from epoxy-coated anodized aluminum with a brilliant white finish. Nitrile valves and diaphragms perform well under harsh conditions . Accepts low-resistance 2" hose adapters for maximum performance . 31 GPM @ 70 strokes/min. @ 0 head. . Body: Anodized aluminum .

Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .

Service Kit, Gusher 10 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.

Spares Kit for Whale Gulper 220 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.

Gusher 25 Service Kit from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.

F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.