Top Sellers
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Fast Cure 5200 Sealant - White, 3 OZ from 3M PRODUCTS
Cures tack-free in just two hours The same performance as standard 5200, but becomes tack-free in just two hours and cures in 24 hours. White. Formulation: One-part polyurethane adhesive/sealant . Recommended Usage: Permanent bonding, above or below water. Extremely strong & flexible . Material Incompatibilities: Acrylics, Some plastics (ABS, Lexan) . Cure Time: Tack-free: 2 hrs. ; Complete cure: 24 hrs. . Cleanup: Mineral spirits or kerosene .
|
5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
|
Quart from INTERLUX, Brightside Polyurethane, Gallon from INTERLUX
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4205/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4207/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4208/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4217/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4218/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4233/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4237/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4241/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4247/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside® Striping Enamels with Teflon®
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
Part No: Y4248/HP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4248/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4250/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4250/QTCA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4253/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside® Striping Enamels with Teflon®
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
Part No: Y4258/HP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4258/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4259/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4259/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside Pre-Kote Primer
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
Part No: Y4279/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside Pre-Kote Primer
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
Part No: Y4279/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside Pre-Kote Primer
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
Part No: Y4280/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4316/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
Makes brushing and rolling certain antifouling paints easierSlow-drying solvent aids brushing and improves flow of copolymer paints such as Micron CSC Extra and Fiberglass Bottomkote ACT. Quart.
Part No: Y433/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4351/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4353/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4359/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside® Striping Enamels with Teflon®
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
Part No: Y4359/HP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4359/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4360/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4381/QT
|
|
|