Top Sellers
Fitting Relocation Kit for Todd Poly Tanks from TODD ENTERPRISES
This kit enables you to seal existing ports in your Todd water tank and install new ones wherever you need them for your installation.
|
Gas Caddy from TODD ENTERPRISES
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
|
Waste Caddy from TODD ENTERPRISES
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
|
|
|
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
|
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
|
|
|
from SCHAEFER, Red from DACA INNOVATIONS, from TODD ENTERPRISES
|
|
Home -> Electronics -> Global Positioning Systems -> GPS Accessories
Designed as a remote sensor, the AutoComp 1000 can be mounted in a magnetically “clean” location (e. g. , away from speakers, motors, wiring bundles, and other sources of changing magnetic fields), and its continuous automatic compensation feature ensures that the most precise heading data (within ±0. Accurate to within ±0. 5° . Fast 10 Hz NMEA 0183 standard output compatible with other ARPA radars, autopilots, and other electronic systems; optional interface card available for other outputs .
Part No: 01-0118-0001
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0201
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0202
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0203
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0204
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0301
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0302
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0303
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0304
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0401
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0402
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0403
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->StowAway™ Inflatable Fenders
They inflate and deflate in seconds, for quick deployment and compact storage. Each features a rugged outer nylon shell and vinyl air chamber with valve for easy inflation/deflation. The 1-1/2" webbing strap with buckle makes them easy to hang and the stainless-steel ring at the bottom end to enables horizontal deployment. Sold individually or in kits of two or four fenders (kits include a hand pump and deluxe tote). Sizes Small = 6" x 18" (for boats under 18') .
Part No: 01-0404
|
|
|
|
Home -> Sailboat -> Blocks->Series 01 Blocks
Designed to function with minimal friction, these single blocks are constructed of tumbled and polished stainless steel. The Delrin® sheaves turn on stainless steel spacers which keep the cheeks from squeezing and binding the sheave. Head shackles are stamped stainless steel with clevis and cotter ring attachment. Sheave: Delrin. Sheave Size: 3/4". Line Diameter: 1/4" max. Cheek Material/Finish: Stainless steel. Shackle/Strap Type: Stainless clevis/cotter.
Part No: 01-07
|
|
|
|
Home -> Seating & Covers -> Tables
The roto-molded, textured polyethylene table top with four molded-in cup holders is the ideal material for the marine environment and is easy to maintain.
Part No: 01-100W
|
|
|
|
Home -> Seating & Covers -> Tables
Designed for easy installation and removal, these roto-molded, easy-to-maintain textured polyethylene table tops are ideal for the marine environment. The system includes: Oval tabletop with four molded-in cup holders 7. 5"dia. , round, anodized aluminum, table/floor mounts included A 26"H x 2. 5"dia. , anodized aluminum table post Oval table top is 32. 5"L x 17.
Part No: 01-100WC
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-13WMH
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-18WMH
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-24WMH
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-28WMH
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-36WMH
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting
Extra bright prismatic conspicuity tape reflects light even during the day. Required on trailers over 80" wide or with a 10,000lb. gross vehicle weight rating. Exceeds DOT requirements for conspicuity tape. Five strips.
Part No: 01-4065-05
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Stick-On Tape Reflectors
Stick-on tape reflectors are great for application on curved or flat surfaces or anywhere you'd like to increase nighttime visibility and they can't be cracked or broken. Bright prismatic appearance exceeds DOT requirements for reflector performance. Super-sticky adhesive so they won't peel off in harsh conditions. Kits include two Amber and two Red reflectors.
Part No: 01-4114-81
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Stick-On Tape Reflectors
Stick-on tape reflectors are great for application on curved or flat surfaces or anywhere you'd like to increase nighttime visibility and they can't be cracked or broken. Bright prismatic appearance exceeds DOT requirements for reflector performance. Super-sticky adhesive so they won't peel off in harsh conditions. Kits include two Amber and two Red reflectors.
Part No: 01-4115-81
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->License Plate Brackets
Tough duramold brackets will never rust or corrode. Fit popular 2" stud spacing.
Part No: 01-4326-81
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Economy Surface Mount Sidemarker/Clearance Lights
Self-grounding flange mounted lights feature a corrosion-resistant duramold base. Combination marker light with integrated reflector. Not recommended for submersible applications. .
Part No: 01-4639-75
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Economy Surface Mount Sidemarker/Clearance Lights
Self-grounding flange mounted lights feature a corrosion-resistant duramold base. Combination marker light with integrated reflector. Not recommended for submersible applications. .
Part No: 01-4639-76
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Sealed Sidemarker/Clearance Lights
Polycarbonate lens and housing are sonically welded for stability. This light is often used in the fender marker light location. Fully submersible. Models 6861488 and 6861371 include a self grounding chrome bracket. 2-1/2"W x 1-1/4"H x 7/8"D.
Part No: 01-4641-81
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Sealed Sidemarker/Clearance Lights
Polycarbonate lens and housing are sonically welded for stability. This light is often used in the fender marker light location. Fully submersible. Models 6861488 and 6861371 include a self grounding chrome bracket. 2-1/2"W x 1-1/4"H x 7/8"D.
Part No: 01-4641-82
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Sealed Over 80"W Sidemarker/Clearance Lights
Mount on trailers over 80" wide for use as a combined side marker and clearance light with reflector. Lens is sonically sealed to base for stability. Easy to mount with a single stud. Pre-wired, mounting hardware included. Fully Submersible. .
Part No: 01-4644-72
|
|
|
