Top Sellers
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
|
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
|
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
Clamshell Vent, 9/16"H x 2"W x 2"L from PERKO
Type: Passive clamshell vent Material: Chrome-plated brass Warranty: Five years.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
|
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
|
Scupper Valve Assembly from PERKO
Scupper valve assembly is molded white plastic with soft black flapper valve. Without tru-hull and mounting hardware . For surface mount applicaions .
|
|
from HARKEN, 8”W from PERKO, Plain from PERKO, from MOONLITE MARINE
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Side Lights
Black plastic base For 12, 24 or 36 Volts, bulb not included 112-1/2° Visibility Arc, 2 nm visibility 5-1/4" Overall height; 4-1/4" lens height, Screw size: #10.
Part No: 0109G00BLK
|
|
![Dia 3/8", Thread 16, Length 4" Pack of 2 from FASCO FASTENERS]( "Dia 3/8\", Thread 16, Length 4\" Pack of 2 from FASCO FASTENERS")
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts - Hex Head
Type 18-8 stainless steel.
Part No: 0109MP
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Side Lights
Black plastic base For 12, 24 or 36 Volts, bulb not included 112-1/2° Visibility Arc, 2 nm visibility 5-1/4" Overall height; 4-1/4" lens height, Screw size: #10.
Part No: 0109R00BLK
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 011
|
|
|
|
Home -> Electrical -> Interior Lighting->LED Underwater Livewell Lights
Completely waterproof, shock proof LED lights are rated at 100,000 hours of unlimited use and draw less than 50 miliamps. 1"D x 1 1/8"L. Requires 11/16" dia.
Part No: 011-5500-7
|
|
|
|
Home -> Safety -> First Aid & Medical
This super-rugged, multi-use kit is great for any adventure where conditions may be adverse. Packed in a high-quality welded dry bag, it includes basic first aid components and must-have survival items such as Aquaseal® urethane adhesive, waterproof storm matches and a 2-person Heatsheet® thermo-reflective blanket with printed survival instructions. An excellent choice for all small watercraft, inflatables, kayaks and canoes—enough medical care for groups up to 6 people. 5" .
Part No: 0110-0260
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
Black plastic base For 12, 24 or 36 Volts, bulb not included 135° Visibility Arc, 3 nm visibility 5-1/4" Overall height; 4-1/4" lens height, Screw size: #10.
Part No: 0110000BLK
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Black plastic base For 12, 24 or 36 Volts, bulb not included 135° Visibility Arc, 2 nm visibility 5-1/4" Overall height; 4-1/4" lens height, Screw size: #10.
Part No: 0111000BLK
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories
Repair cracks or holes in your polyethylene or Royalex kayak. Complete kit includes everything you need to touch up your boat’s surface. Repair material. Adhesive and finishing solution. Wood stir stick. 2" paint brush.
Part No: 0113310641
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Hatch Holders
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
Part No: 0115-1
|
|
|
|
Home -> Safety -> First Aid & Medical -> First Aid Kits
The Marine Series 1000 is designed to provide the medical supplies you need for coastal cruising when professional medical care can be reached within a 12 hour time period. The floating, foam padded case protects items and its abrasion-resistant, textured rubber bottom keeps case from sliding on wet surfaces. It’s made of 420 denier nylon with durable, water-resistant coating and a water-resistant zipper to seal out moisture. 5"/420 denier nylon with durable, water-resistant coating.
Part No: 0115-1000
|
|
|
|
Home -> Safety -> First Aid & Medical
The Marine Series 2000 contains many of the same medical instruments and supplies as the Marine 3000 although in smaller quantities. Contains seven modules including CPR instruments, fracture/sprain, medications, burns, bleeding, dental/suture/syringe and wound care. The abrasion-resistant, textured rubber bottom keeps it from sliding on wet surfaces. Number of Pieces: 558 . Case Size/Material: 22' x 12" x 5. 5"/420 denier nylon with durable, water-resistant coating .
Part No: 0115-2000
|
|
|
|
Home -> Safety -> First Aid & Medical -> First Aid Kits
This kit is intended for use while in offshore waters where access to professional medical care or medical evacuation is likely to exceed 24 hours. Contains seven expanded modules including CPR instruments, fracture/sprain, medications, burns, bleeding, dental/suture/syringe and wound care. Intended Use: Supplies for offshore waters for up to 28 days for up to 14 people . Case Size/Material: 24" x 14" x 6. 5"/420 denier nylon with durable, water-resistant coating .
Part No: 0115-3000
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks->Line Chocks
Fasteners not included.
Part No: 0119DP4CHR
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 012
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
Part No: 0120DP2CHR
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->120 Series Vertical-Mount Side Navigation Lights
European style Series 120 side navigational lights are certified for use on powerboats and sailboats up to 12m (or 39. 4’) with 12V electrical systems. Red and green lenses with 12V bulbs included. 1nm. visibility range. White plastic finish. Case Material: White Plastic . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 83A .
Part No: 0120WP0DP1
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->120 Series Vertical-Mount Side Navigation Lights
European style Series 120 side navigational lights are certified for use on powerboats and sailboats up to 12m (or 39. 4’) with 12V electrical systems. Red and green lenses with 12V bulbs included. 1nm. visibility range. White plastic finish. Case Material: White Plastic . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 83A .
Part No: 0120WSDDP1
|
|
![Chatfield / Jefferson / Trinidad / Carter Lake Fishing Chart from FISH-N-MAP]( "Chatfield / Jefferson / Trinidad / Carter Lake Fishing Chart from FISH-N-MAP")
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Western U.S. Fishing Maps
Fish-n-Map Company's Underwater Topography Fishing Maps are printed on a waterproof, tear-resistant plastic material. Maps are folded to 9" x 4"; when opened, each map is approximately 3' x 2' in size.
Part No: 01228
|
|
![Cherry Creek / Aurora / Quincy Fishing Chart from FISH-N-MAP]( "Cherry Creek / Aurora / Quincy Fishing Chart from FISH-N-MAP")
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Western U.S. Fishing Maps
Fish-n-Map Company's Underwater Topography Fishing Maps are printed on a waterproof, tear-resistant plastic material. Maps are folded to 9" x 4"; when opened, each map is approximately 3' x 2' in size.
Part No: 01229
|
|
![Dillon Reservoir / Green Mountain Reservoir Fishing Chart from FISH-N-MAP]( "Dillon Reservoir / Green Mountain Reservoir Fishing Chart from FISH-N-MAP")
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Western U.S. Fishing Maps
Fish-n-Map Company's Underwater Topography Fishing Maps are printed on a waterproof, tear-resistant plastic material. Maps are folded to 9" x 4"; when opened, each map is approximately 3' x 2' in size.
Part No: 01231
|
|
![Granby / Grand Lake / Shadow Mountain Fishing Chart from FISH-N-MAP]( "Granby / Grand Lake / Shadow Mountain Fishing Chart from FISH-N-MAP")
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Western U.S. Fishing Maps
Fish-n-Map Company's Underwater Topography Fishing Maps are printed on a waterproof, tear-resistant plastic material. Maps are folded to 9" x 4"; when opened, each map is approximately 3' x 2' in size.
Part No: 01233
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Deck Fills
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
Part No: 0126DP0BLK
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->2.25" Blocks
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
Part No: 013
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Keypin Shackles, Captive Pin
Wichard Keypin shackles are easily opened by a single half turn, bu tremains captive within the body of the shackle. Keypin shackles with a bar allows the line, thimble or grommet to remain attached to the shackle when the pin is released.
Part No: 01306
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->6" Stikit Gold Film 260L Regular Disks
No-hole, film-backed disks for use in: Scuffing or sanding prior to painting. Removing runs, or orange peel. Also used as a final step prior to compounding .
Part No: 01318
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->6" Stikit Gold Film 260L Regular Disks
No-hole, film-backed disks for use in: Scuffing or sanding prior to painting. Removing runs, or orange peel. Also used as a final step prior to compounding .
Part No: 01320
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01321
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01322
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01323
|
|
|
