Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Ultima Electronic Bilge Switch from JOHNSON PUMPS
The same switch that comes preinstalled on Johnson Ultima Combo Automatic Bilge Pumps. With no moving parts and totally sealed solid state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/deactivates at 2" and 3/4" fluid levels. A three second delay prevents false starts. Rated to handle pumps up to 20 amps at 12V or 24V DC. Activation Method: Solid-state electronic . Dimensions: 2-3/8"H x 2-11/16"L x 1-1/8"D .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
Non-Locking Flush Lock - Chrome/White with Offset Cam Bar from PERKO
Non-Locking chome plated zinc alloy and white plastic with offset adjustable cam bar. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
|
Gas Deck Fill Replacement Cap, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
Waste Caddy from TODD ENTERPRISES
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
|
Gas Deck Fill Replacement Cap, Plain from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
ComfortMate Manual Head from THETFORD
Designed for comfort, convenience and worry-free days on the water, this head features a residential-like china bowl and an ergonomic handle that makes it easy to flush. A compact footprint enables this head to fit in tight locations and the free-standing manual pump easily adapts for right or left handed installation. Features: Free-standing pump, china bowl with residential-like styling. Material: Vitreous china . Port Sizes: 3/4" inlet, 1-1/2" discharge . Dimensions: 14.
|
Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
|
1, Shaft Seal - 2 1, HS Shaft Seal - 1 1, 4" x 2 1, 2, 2" x 8 1, 8" x 2 1
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-114-212
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-114-214
|
|
|
|
Home -> Electronics -> Boat Instruments->Packless Sealing System Shaft Seals
PSS Shaft Seal Packless Sealing System is a dripless stuffing box and packing gland replacement for sailboat and power boat drivetrains. The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability.
Part No: 02-118-112
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-118-134
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-134-300
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-138-214
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-200-300
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-200-312
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-212-312
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-212-400
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-214-312
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-214-400
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->PSS (Packless Sealing System) Shaft Seals
PSS (Packless Sealing System) Shaft Seals for various shaft sizes .
Part No: 02-25M-200
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-300-412
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-30M-200
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 02 Blocks
Small utility blocks to use for control line applications on small dinghies and one-designs. Single blocks are constructed of polished and tumbled stainless steel. The Delrin<V>® sheaves turn on stainless steel spacers which keep cheeks from squeezing and binding the sheave. Sheave: Delrin. Sheave Size: 1-1/16" (27mm). Line Diameter: Up to 5/16". Cheek Material/Finish: Stainless steel. Shackle/Strap Type: Stainless clevis/cotter.
Part No: 02-50
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
The StowAway 2 fits directly into your vehicle’s standard 2" receiver. The standard model has a fixed frame suitable for RVs, SUVs or vans that do not have or need access to a rear door. The Swingaway pivots and swings out for easy access to the rear of the vehicle (includes hitch tightener). Waterproof, easy-access trunks. Standard Stowaway has a 6" rise. Spare Tire model extends to accommodate a spare tire. Towing has additional 2" receiver to pull light (100lb. tongue wt.
Part No: 020.6
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks
Add these optional accessories to your StowAway 2 Cargo Carrier for even more versatility! License Plate Light & Bracket Kit: Mounts on the rear of your StowAway2 Cargo Carrier to display your license plate. Plugs directly into the pre-installed wire harness inside the StowAway2 Cargo Box and includes light, bracket and hardware. License Holder Kit: Eliminates the "play" at the hitch junction so that any vibration is greatly reduced.
Part No: 020.7
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->RC Continuous Line Furling System
The drum’s extreme low-profile increases luff length and puts the foot of the sail closer to the deck. The simple pulley design virtually eliminates troublesome line overrides encountered with standard drum-style systems. The aerodynamic head foil with dual luff grooves makes sail changes fast and the simple tack ring fitting makes it easy to lift the drum for turnbuckle inspection or adjustment. Single line design eliminates drum overrides . Large diameter drum for increased turning power .
Part No: 02001101010
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->RC Continuous Line Furling System
The drum’s extreme low-profile increases luff length and puts the foot of the sail closer to the deck. The simple pulley design virtually eliminates troublesome line overrides encountered with standard drum-style systems. The aerodynamic head foil with dual luff grooves makes sail changes fast and the simple tack ring fitting makes it easy to lift the drum for turnbuckle inspection or adjustment. Single line design eliminates drum overrides . Large diameter drum for increased turning power .
Part No: 02001181412
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->RC Continuous Line Furling System
The drum’s extreme low-profile increases luff length and puts the foot of the sail closer to the deck. The simple pulley design virtually eliminates troublesome line overrides encountered with standard drum-style systems. The aerodynamic head foil with dual luff grooves makes sail changes fast and the simple tack ring fitting makes it easy to lift the drum for turnbuckle inspection or adjustment. Single line design eliminates drum overrides . Large diameter drum for increased turning power .
Part No: 02001221616
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->RC Continuous Line Furling System
The drum’s extreme low-profile increases luff length and puts the foot of the sail closer to the deck. The simple pulley design virtually eliminates troublesome line overrides encountered with standard drum-style systems. The aerodynamic head foil with dual luff grooves makes sail changes fast and the simple tack ring fitting makes it easy to lift the drum for turnbuckle inspection or adjustment. Single line design eliminates drum overrides . Large diameter drum for increased turning power .
Part No: 02001301816
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
Black plastic with stainless-steel mounting bracket 12, 24 or 32 Volt bulbs included Certified for use on sail or power-driven vessels under 20 meters (65. 6 ft.
Part No: 0200MB0DP1
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
For powerboats and sailboats less than 20m or 65. 6'. Horizontal surface-mount. Case Material: Black plastic . Case Dimensions: 4-7/8"H x 3-5/16" dia. . Mounting Hardware: #10 RHMS . Volts: 12V . Draw: 0. 83A . Replacement Bulb: Model 8646697 .
Part No: 0200SWBDP1
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02018
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 020199
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Economy All-Round Light
24 "L, two-contact pole light with 3"L white transluscent globe. 5° chrome-plated black plastic/chrome-plated, zinc-alloy base with 5° rake sold separately. Base measures 3-3/4"L x 1-5/8"W and includes sealing cap. For sailboats and powerboats under 20m or 65. 6'. Case Material: Translucent plastic globe and top, chrome-plated base . Mounting Hardware: Base sold separately. Base requires #8 fasteners (sold separately) . Volts: 12V . Draw: 0.
Part No: 0201DP0WHT
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02021
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02022
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Prop-Tite Nut Kits
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
Part No: 02025
|
|
|
