Super Sub Pump 650 Auto, 650gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .

24V Gulper Sanitation Pump, 2A @ 24V DC Draw from WHALE PUMPS
Designed to pump solid, unmacerated waste, this diaphragm pump boasts quiet operation and easy installation. It features 4. 7gpm capacity, is self-priming to 9. 8' and can run dry for extended periods without damage. Inlet and outlet ports rotate to permit installation in the position you wish. Nitrile valves. Glass-filled nylon housing. Type: Diaphragm waste pump . gpm: 4. 7 . Macerates: No, pumps unmacerated waste .

12V Gulper Pump, 7.5A/8A Draw (3/4" & 1" Hose) from WHALE PUMPS
Get three applications in one with this high-capacity pump designed for use as a gray water pump, remote bilge pump and fishbox drainage. It features a diaphragm design that won’t clog on debris. A wraparound securing strap and three-footed design keeps this pump in place even under extreme vibration conditions. Includes barbed connections for 3/4" (19mm) and 1" (25mm) ID hose. Material: Glass-filled nylon pump head, Nitrile/Santoprene inlet and outlet valves, Santoprene diaphragm .

Gusher Urchin Manual Bilge Pump from WHALE PUMPS
This is a good manual bilge pump for small to medium-sized boats. Lightweight and sturdy, its easy lever action allows fast pumping. Easy to use and maintain, the handle can be oriented in any direction, and the diaphragm is quickly ac-cessed for removing debris. Stepped inlet/outlet nipples for either 1" or 1-1/2" hose connection. Pumps 11 g. p. m. per minute at 1" bore at 3' lift and 1. 5' head; 14-1/2 g. p. m.

24V Grouper Bait/Fish Box Pump, 2.5A Draw from WHALE PUMPS
Designed for baitwell or fish box pumpout, this reliable pump features valves that won’t choke on fishy remnants at the end of the day. Capacity is more than ample at 6. 8 gallons per minute and it is self-priming to 10 feet. Installation is made easy by the pump’s ports which rotate 360°. Includes fittings to accommodate 1" or 1 1/2" hose. gpm: 6. Self-Prime: 10' . Material: Aluminum, glass-filled nylon, Santoprene® diaphragm. Dimensions: 6-3/4"W x 10-3/4"L .

Gulper Shower Drain Kit from WHALE PUMPS
The smart way to handle gray water, this Sump/Pump Combo enables you to plumb all gray water hoses to one location. Eight inlet ports, each with two different dimensions permit a variety of hose sizes to be connected. Sump/Pump Combo includes an automatic float switch that activates a Gulper 220 pump which pumps gray water to one location—either a holding tank or overboard. Material: Polyethylene . Dimensions: Sump, including ports, not including pump: 13. 8"L x 10. 2"W x 6.

Twist Shower, Hot/Cold Mixer from WHALE PUMPS
A refreshing departure from deck shower designs of the past, the innovative Twist offers simple operation in a space-saving, ergonomic design. Spray holes are located in the soft-body handle and a twist of the wrist is all you need to initiate water flow or mix hot with cold. Material: High-impact, glass-filled polypropylene and Nitrile . Dimensions: Side Mount: 4-3/4"dia. x 7-1/2"H (Requires 6"D clearance); Top Mount: 2-5/16"dia. x 7-1/2"D . 2' .

Twist Shower, Cold Only from WHALE PUMPS
A refreshing departure from deck shower designs of the past, the innovative Twist offers simple operation in a space-saving, ergonomic design. Spray holes are located in the soft-body handle and a twist of the wrist is all you need to initiate water flow or mix hot with cold. Material: High-impact, glass-filled polypropylene and Nitrile . Dimensions: Side Mount: 4-3/4"dia. x 7-1/2"H (Requires 6"D clearance); Top Mount: 2-5/16"dia. x 7-1/2"D . 2' .

F35B-8007 Gen Set or Diesel 12mm Shaft Engine Cooling Pump, Onan, Westerbeke, Faryman OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.

F7B-9 Gear-Driven Ford Engine Cooling Pump, Ford OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.

Ballast Pump from JOHNSON PUMPS
Designed to quickly fill, or when reversed, drain ballast tanks on wakeboard boats at more than 12 gallons per minute. Pumps fresh or seawater and features a robust design capable of sustaining continuous duty with built-in thermal overload protection. Pump is for water handling only and is not designed to run dry for an extended period of time. gpm: 12 . Reverse Cycle: Yes, when used with a DPDT switch (double pole, double throw) . Self-Prime: 12' . Material: Bronze pump, rubber impeller .

Surface Mount Urchin Bilge Pump from WHALE PUMPS
Manual bilge pump that works well for small to medium-sized boats. Stepped inlet/outlet nipples accommodate 1" and 1-1/2" hose connections. Infinitely variable handle/flow positions. Surface mount has fixed handle. Thru-deck mount has removable handle. gpm: 14. 5 . Material: Acetal copolymer . Dimensions: 11-3/4"H x 9-3/4"W x 10-7/8"L . Port Sizes: 1" or 1-1/2" .

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Thru-Deck Mount Urchin Bilge Pump from WHALE PUMPS
Manual bilge pump that works well for small to medium-sized boats. Stepped inlet/outlet nipples accommodate 1" and 1-1/2" hose connections. Infinitely variable handle/flow positions. Surface mount has fixed handle. Thru-deck mount has removable handle. gpm: 14. 5 . Material: Acetal copolymer . Dimensions: 11-3/4"H x 9-3/4"W x 10-7/8"L . Port Sizes: 1" or 1-1/2" .

Thru-Deck Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".