Top Sellers
|
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Polycord Value Pack (10 polycords in assorted colors & lengths) from POLYFLEX
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
|
Pack of 10 from FASCO FASTENERS
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Masking Tape And Paper->Marine Fine Line Tape #218
For an ultra-sharp edge, use this tapeFor fine-line enamel applications. Stretches for contours. Recommended Usage: Bootstripes, paint borders; cleanest color line separation . Material: Polypropylene film backing . Removal Time: 24 hrs .
Part No: 06305
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0631MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0635MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0636BP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0636MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0637MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0638BP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0638MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0640BP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0640MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0641BP-A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0641MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0642MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0644MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0646MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0647MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0648MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0649MP
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Adhesives, Glue & Tape->5200 Polyurethane Adhesive/Sealant
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
Part No: 06500
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065016
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065036
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Adhesives, Glue & Tape->5200 Polyurethane Adhesive/Sealant
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
Part No: 06504
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Caulking Compounds
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
Part No: 06510
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065116
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065124
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065136
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0651MP
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Caulking Compounds->Fast Cure 5200 Polyurethane Adhesive/Sealant
Cures tack-free in just two hours The same performance as standard 5200, but becomes tack-free in just two hours and cures in 24 hours. White. Formulation: One-part polyurethane adhesive/sealant . Recommended Usage: Permanent bonding, above or below water. Extremely strong & flexible . Material Incompatibilities: Acrylics, Some plastics (ABS, Lexan) . Cure Time: Tack-free: 2 hrs. ; Complete cure: 24 hrs. . Cleanup: Mineral spirits or kerosene .
Part No: 06520
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065306
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065310
|
|
|