Top Sellers
|
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Star Brite StarTron Gasoline Additive, 8oz. from STARBRITE
Stabilizes gas for short and long term periods of inactivity (up to one year) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. Eight ounces treats 128 gallons of gas. Reduce fuel consumption and engine wear while increasing power. For use with any engine; not toxic to the environment.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
|
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
|
from STARBRITE, Pack of 10 from FASCO FASTENERS
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Screws, Phillips Pan Head
Type 18-8 stainless steel.
Part No: 0831BP-B
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Screws, Phillips Pan Head
Type 18-8 stainless steel.
Part No: 0831MP
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
All-around cleaner for your boatCleans grease, oil, stains, even fish blood. Simply spray on and wipe off. Safe for use on fiberglass metal, plastic, formica. 22oz. 22oz.
Part No: 083222P
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Seacocks with 90° Hose Adapter
Cast bronze fittings feature plastic ball and seat for a tight seal and ease of operation. Assembly includes thru-hull, hose adapter, drain plug, four pre-drilled holes and bonding screw. If needed, handles can be easily removed.
Part No: 0834009PLB
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Seacocks with 90° Hose Adapter
Cast bronze fittings feature plastic ball and seat for a tight seal and ease of operation. Assembly includes thru-hull, hose adapter, drain plug, four pre-drilled holes and bonding screw. If needed, handles can be easily removed.
Part No: 0834011PLB
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Heavy duty formula removes dirt, grime, scuff marks, oxidation and stains from rubber and vinyl. Provides UV protection. . 16oz.
Part No: 083416
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0834MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0835MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0836MP
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->Polyether Multi-Caulk Sealant - Black, 3 OZ
Excellent for sealing teak deck seams Versatile, waterproof sealant creates a permanently flexible bond between and with fiberglass, wood, glass and metal. Because it is impervious to teak oils and fuels, it is wonderful for teak deck seams, bedding fittings and preventing moisture penetration. May be sanded and painted after curing. Use above and below the waterli Formulation: Fast cure polyether boat caulk. Recommended Usage: <\n>Wood, metal, fiberglass, some plastics.
Part No: 083801WMC
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Caulking Compounds->Polyether Multi-Caulk Sealant - Black, 3 OZ
Excellent for sealing teak deck seams Versatile, waterproof sealant creates a permanently flexible bond between and with fiberglass, wood, glass and metal. Because it is impervious to teak oils and fuels, it is wonderful for teak deck seams, bedding fittings and preventing moisture penetration. May be sanded and painted after curing. Use above and below the waterli Formulation: Fast cure polyether boat caulk. Recommended Usage: <\n>Wood, metal, fiberglass, some plastics.
Part No: 083803WMC
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 084
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0840MP
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Highly polished chrome plated zinc alloy. Recessed center. . Dimensions: 1 3/4" x 1 3/8" . Requires four #6 fasteners .
Part No: 0841DP0CHR
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0841MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0842MP
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Winterizing Chemicals->EZ-To-Store, EZ-To-Start, Additive/Stabilizer
Protects fuel and engine components during storage. Stabilizes and fogs in one easy step. One ounce of gas additive treats five gallons.
Part No: 084308
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Winterizing Chemicals->EZ-To-Store, EZ-To-Start, Additive/Stabilizer
Protects fuel and engine components during storage. Stabilizes and fogs in one easy step. One ounce of gas additive treats five gallons.
Part No: 084332
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0843MP
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets->Doodlebug Scrubbing Pads
Ideal for cleaning and scrubbing practically everything aboard. For cleaning and scrubbing virtually anything onboard .
Part No: 08440
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0844MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0846MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0847MP
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Prevents corrosion when storing inboard or outboard engines for an extended period of time. Special formula makes starting engine after storage quick and easy.
Part No: 084812
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0848MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
.
Part No: 0849MP
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 085
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Oils & Sealers->Premium Golden Teak Oil
Easy-to-apply formula to protect and beautify your teakProtects your boat’s wood and improves its appearance. Won’t crack, chip or peel so it’s ideal for decks, grab rails, doors and hatches. Fast-drying, easy-to-apply formula provides warm golden color while fighting UV damage. Highlights the natural beauty of wood. Protects against UV damage.
Part No: 085100
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Oils & Sealers->Premium Golden Teak Oil
Easy-to-apply formula to protect and beautify your teakProtects your boat’s wood and improves its appearance. Won’t crack, chip or peel so it’s ideal for decks, grab rails, doors and hatches. Fast-drying, easy-to-apply formula provides warm golden color while fighting UV damage. Highlights the natural beauty of wood. Protects against UV damage.
Part No: 085116
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Oils & Sealers->Premium Golden Teak Oil
Easy-to-apply formula to protect and beautify your teakProtects your boat’s wood and improves its appearance. Won’t crack, chip or peel so it’s ideal for decks, grab rails, doors and hatches. Fast-drying, easy-to-apply formula provides warm golden color while fighting UV damage. Highlights the natural beauty of wood. Protects against UV damage.
Part No: 085132
|
|
|