Top Sellers
Propane Storage Locker Bag from MAGMA PRODUCTS
propane bottles outside of your boat for safety.
|
36" Stabilizer for 30'+ Boat Size from MAGMA PRODUCTS
This proven, hinged wing design operates without noisy flapper valves for quiet anchoring day and night. Sailors can easily suspend the stabilizer from their boat’s boom or spinnaker pole. Powerboaters can deploy it with the optional telescoping, aluminum outrigger. The outrigger includes Dacron support lines, a soft rubber hull pad, and an anodized mounting boot. Stabilizer includes bridle and storage/carry case. Stabilizer measures 36" x 21" when fully open, which creates 756sq.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
303 High Tech Fabric Guard, Pint from 303 PRODUCTS
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
|
Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Gelcoat Restoration Kit from MEGUIARS
Everything you need to rejuvinate and protect your boat's gelcoatAssortment of Meguiar’s fiberglass maintenance products to clean, polish and protect badly oxidized fiberglass. Contains one 16oz. container each of #56 Pure Wax, #49 Heavy-Duty Oxidation Remover and #45 Boat Polish. Complete gelcoat restoration system for your boat.
|
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
3/16''X1-3/16'' Shear Pin from S And J PRODUCTS
Be prepared for the unexpected . We stock a variety of sizes to fit virtually every outboard or outdrive. Consult your owner's manual for sizing. Stainless or brass.
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
|
1218) from MAGMA, 085) from MAGMA PRODUCTS
|
|
Home -> Seating & Covers -> Seating->Albemarle Seat & Pedestal Package
Affordable, stylish and ergonomically correct, this seat is made to withstand the demands of marine use. The helm seat features molded-in armrests and includes slider and pedestal. The companion seat does not have armrests or slider/pedestal.
Part No: 10-0101C
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Key West Helm Seat & Pedestal Package
Ergonomically designed helm chair fits in smaller spaces, yet still provides full-sized armrests for comfort during a long day on the water.
Part No: 10-0102C
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables -> Barbecues And Mounts->Marine Kettle® Grill Mounting Hardware
Versatile and secure mounts install easily and disconnect quickly Magma BBQs are sold without mounts, so you can select the right mount for your needs. We recommend that you also buy a Shore Stand (Model 2794295) so that you can use your BBQ on land or on your dock.
Part No: 10-043
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables -> Barbecues And Mounts->Marine Kettle® Grill Mounting Hardware
Versatile and secure mounts install easily and disconnect quickly Magma BBQs are sold without mounts, so you can select the right mount for your needs. We recommend that you also buy a Shore Stand (Model 2794295) so that you can use your BBQ on land or on your dock.
Part No: 10-047
|
|
|
|
Home -> Sailboat -> Blocks
High-load, high-strength block has a Universal Circuit (UC) sheave system with multiple friction-reducing bearing components, so the block has considerably less friction than conventional roller blocks, and actually becomes more efficient as you use it. The stainless head swivels or is fixed with a three-way locking fixture. Configuration: Single swivel block. Sheave: Aluminum UC for wire or line. Ball Bearings: Nomex Teflon high-impact glass-fiber. Max. Line Diameter: 5/8" (16mm).
Part No: 10-05-UC
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-13096-02
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-151
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-153
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables -> Barbecues And Mounts->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-154
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-160
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24139-5
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24228-1
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24232-1
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24277-3
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24569-09
|
|
|
|
Home -> Engine Systems -> Engine Parts
You can equip it with an optional vacuum switch to keep it from running dry, or a pressure switch, both available through our Special Order Center (call 800-568-0319). Relatively noiseless, due to an integrated cam and vibration-absorbing rubber feet. An O-ring gasket at the end cover prevents irritating leakage and a flexible Nitrile impeller lets you pump diesel as well as water. Bronze construction with a ball-bearing motor and serviceable design assure you years of service. Not shown.
Part No: 10-24689-03
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purpose Pumps
Designed to quickly fill, or when reversed, drain ballast tanks on wakeboard boats at more than 12 gallons per minute. Pumps fresh or seawater and features a robust design capable of sustaining continuous duty with built-in thermal overload protection. Pump is for water handling only and is not designed to run dry for an extended period of time. gpm: 12 . Reverse Cycle: Yes, when used with a DPDT switch (double pole, double throw) . Self-Prime: 12' . Material: Bronze pump, rubber impeller .
Part No: 10-24690-03
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Gourmet Series Replacement Parts
Replacement parts for Magma Rectangular Barbeques.
Part No: 10-263
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-35038-5E
|
|
|
|
Home -> Engine Systems -> Engine Parts
Size F4B-9 pump is a replacement for Volvo engines: AQ110, AQ115, AQ115A, AQ1158, AQ120, AQ120B, AQ125A, AQ125B, AQ130, AQ130A, AQ130B, AQ130C, AQ130D, AQ140, AQ60F, AQ95, AQ95A, BB100, BB115, BB115B, BB115C, BB30, MB16A, MB18, MB18F, MB20, MB20A, MB20B, MB20C, MD17C, MD17D, and MD3B. Uses impeller model 09-1026B and service kit model 09-45905. May require two mounting clips (not included).
Part No: 10-35098-3
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-35157-3
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-453
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables -> Barbecues And Mounts
Replacement radiant plate for West Marine 200SS Propane Kettle Barbecue.
Part No: 10-465
|
|
|
|
Power Pro Spectra Hi-Visibility Braid made from ultra strong braided Spectra fiber.
Part No: 10-500
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 10-5NS
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 10-5S
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-657
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-665
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables
Replacement lid for West Marine 200SS Propane Kettle Barbecue; does not include hinge.
Part No: 10-753
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-765
|
|
|