Top Sellers
|
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
|
Tee Type Sanitation Hose Fitting, Slip Fitting Thread from SHIELDS RUBBER
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.
|
|
|
|
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Marelon Intake Scoop Strainer, 1-1/4" Max. Thru-Hull Si from FORESPAR
Made of durable composite material and engineered to exceed ABYC and ISO standards.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
|
|
|
Windshield Support Bar, 13" from TAYLOR
Top-quality support bars are original equipment on many walk-thru windshields. Anodized aluminum tubing with nylon fittings, which pivot in almost any direction for easy installation.
|
Nova Lift™ from FORESPAR
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.
|
|
|
|
from FACNOR, StaFast Fitting from FORESPAR, 10''X30 from TAYLOR
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Foot
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 102150
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 1022
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Slotted Round Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 1022
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102210
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Big Stick Carbon Fiber Tiller Extensions
'Big Stick' Carbon Fiber Tiller Extension Rugged, light weight tiller extensions made for go-fast dinghy or keel boat. Extensions are shipped loose for custom lengths to suit your class requirements. 7/8" diameter shaft for a solid grip for either men or women. . Straight tubes for easy modification and tailoring. Proven "speed lock" design for 360° of rotation without binding. Quick mount⁄dismount, and easy replacement if necessary.
Part No: 102214
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Big Stick Carbon Fiber Tiller Extensions
'Big Stick' Carbon Fiber Tiller Extension Rugged, light weight tiller extensions made for go-fast dinghy or keel boat. Extensions are shipped loose for custom lengths to suit your class requirements. 7/8" diameter shaft for a solid grip for either men or women. . Straight tubes for easy modification and tailoring. Proven "speed lock" design for 360° of rotation without binding. Quick mount⁄dismount, and easy replacement if necessary.
Part No: 102216
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Big Stick Carbon Fiber Tiller Extensions
'Big Stick' Carbon Fiber Tiller Extension Rugged, light weight tiller extensions made for go-fast dinghy or keel boat. Extensions are shipped loose for custom lengths to suit your class requirements. 7/8" diameter shaft for a solid grip for either men or women. . Straight tubes for easy modification and tailoring. Proven "speed lock" design for 360° of rotation without binding. Quick mount⁄dismount, and easy replacement if necessary.
Part No: 102217
|
|
|
|
Home -> Electrical -> Chargers & Inverters
Increase your power by connecting two panels together with our simple to use Plug and Play system.
Part No: 10222
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102221
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102222
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102223
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102225
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102226
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102227
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->LS & LX Series Furlers
A drum bearing box with a steel thrust bearing between two large, self-lubricating polymer fiber bearings means that this furler has a smooth rotation under high axial (halyard) and lateral (sheet and furling line) loads. The head swivel, with the same bearing system as the drum, rotates smoothly, even under high loads. A halyard deflector wheel prevents troublesome halyard wraps. LS systems feature a non-removable drum, aluminum sail feeder and a fixed tack fitting. Ball Bearings: Torlon® .
Part No: 10223224600
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Teak Sealer
.
Part No: 10224
|
|
|
|
Home -> Fishing -> Fishing Accessories->Bracket Mounts
Extra deck brackets for assorted Scotty downriggers.
Part No: 1023
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 1023
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102310
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Foot
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 102312
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Teak Sealer
.
Part No: 10234
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Slotted Round Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 1024
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 1024
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10240
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10241
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10242
|
|
|
|
Home -> Electrical -> Interior Lighting -> Fluorescent Lights
Commercial-Grade Watertight Multipurpose Luminaire Handy dimensions offer optimized use on board, for example, workshops, engine rooms, stores, holds and passage ways. Electric flexible wiring, heat-resistant up to 105°C. Voltage 12 V DC, 24 V DC . Housing material: Zinc coated steel sheet, deep drawn, seamless, including mounting plate .
Part No: 10242-1
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10243
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10244
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10245
|
|
|
