Top Sellers
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
|
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
|
|
|
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
|
S from TAYLOR, SS from TAYLOR, ) from TAYLOR, Stainless Steel from TAYLOR
|
|
Home -> Fishing -> Fishing Accessories->Power Grip Line Releases
Soft, sensitive pads and two position click adjustment provide adjustable tension.
Part No: 1172
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Side Mount Deck Hinges
Nylon, sold in pairs.
Part No: 11721
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Side Mount Deck Hinges
Nylon, sold in pairs.
Part No: 11722
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->External Eye Ends
Stainles-steel external eye ends.
Part No: 11729
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Power Grip Line Releases
Soft, sensitive pads and two position click adjustment provide adjustable tension.
Part No: 1173
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->External Eye Ends
Stainles-steel external eye ends.
Part No: 11730
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Bimini Jaw Slide, Stainless Steel
Stainless Steel Bimini Jaw Slide Sold individually.
Part No: 11731
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Bimini Jaw Slide, Stainless Steel
Stainless Steel Bimini Jaw Slide Sold individually.
Part No: 11732
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini-Fit-Deck Hinge
Stainless steel deck hinge Sold individually.
Part No: 11733
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini-Fit-Deck Hinge
Stainless steel deck hinge Sold individually.
Part No: 11734
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis
Stainless Steel Side Mount Deck Hinge Mounts vertically on side walls.
Part No: 11735
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini Mount Screws
Flat heads for easy turns.
Part No: 11736
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Bimini Mount Screws
Flat heads for easy turns.
Part No: 11737
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Dishes & Utensils->Galleyware Flags Dinnerware
Non-skid plates for the sea-going galley!This open-stock melamine dinnerware is available in three solid colors or a decorative flag pattern. The plates feature nonskid ring feet.
Part No: 1174
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Window Savers
Prevent rubbing and scratching of plastic windows. Attach to poles where poles touch plastic.
Part No: 11747
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Window Savers
Prevent rubbing and scratching of plastic windows. Attach to poles where poles touch plastic.
Part No: 11748
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Stainless Rail Fittings
Two halves slide together and interlock so these fittings can be mounted without disassembling the rail. A single nut and bolt secures the fitting in the position you want. Ideal for installing bimini tops, stringers for fender racks or wherever a rail-mounted hinge is commonly needed.
Part No: 11749
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Change Pumps
"We don’t know anyone who looks forward to changing engine oil, but this pump should make the job a little easier. The handle makes it easy to carry the goo to a harbor recycling location or your local gas station that accepts used oil. Your engine will appreciate it!" Improved durability and capable of inflating high-pressure This value-priced oil changer makes changing oil a snap! Simply place the transfer probe down the dipstick tube and start pumping.
Part No: 1175
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Stainless Rail Fittings
Two halves slide together and interlock so these fittings can be mounted without disassembling the rail. A single nut and bolt secures the fitting in the position you want. Ideal for installing bimini tops, stringers for fender racks or wherever a rail-mounted hinge is commonly needed.
Part No: 11750
|
|
|
|
Home -> Electrical -> Electrical Wire->Battery Cable
Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing Premium vinyl insulation that resists salt water, battery acid, oil, gas and UV Rated at 600V and 105 degrees C Heavy duty insulation, resistant to heat and abrasion Exceeds all UL 1426, USCG Charterboart (CFR Title 46) and ABYC standards Sold by the foot up to 50' or 100' standard pack, as indicated .
Part No: 117505
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Wax & Protectants
Works at the nano level to provide high UVA/UVB protection in full sun for all vinyl and rubber surfaces. Prevents fading and cracking. Contains no harmful silicone oils; leaves no sticky, gummy residue. Amino-functional polymers provide longer protection. 16oz.
Part No: 1176
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets->Scrub-Pad Cleaning System - Kit
Don't stoop—stand while you scrub!Kit includes swivel holder and medium pad. Kit works with Signature or Heavy-Duty handles to eliminate back-breaking stooping and hand scrubbing. Coarse, medium and fine pads are color-coded and easily removable.
Part No: 1176494
|
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets->Scrub-Pad Cleaning System - Kit
Don't stoop—stand while you scrub!Kit includes swivel holder and medium pad. Kit works with Signature or Heavy-Duty handles to eliminate back-breaking stooping and hand scrubbing. Coarse, medium and fine pads are color-coded and easily removable.
Part No: 1176544
|
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets->Scrub-Pad Cleaning System - Kit
Don't stoop—stand while you scrub!Kit includes swivel holder and medium pad. Kit works with Signature or Heavy-Duty handles to eliminate back-breaking stooping and hand scrubbing. Coarse, medium and fine pads are color-coded and easily removable.
Part No: 1176569
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome-plated zinc with rubber pad. Length: 1''. O. D. : 1 1/4''.
Part No: 1177DP0CHR
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Power Grip Line Releases
Soft, sensitive pads and two position click adjustment provide adjustable tension.
Part No: 1178
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Battery Cable->Battery Cable, 25' Spools
Unlike welding cable or SAE wire, Ancor Marine Grade™ battery cables feature quality to last years. Tinned copper stranding for maximum protection against corrosion and electrolysis Ultra flexible (type 3) stranding resists fatigue due to vibration and flexing Premium vinyl insulation that resist salt water, battery acid, oil, gas and UV Rated at 600V and 105° C Heavy duty insulation, resistant to heat and abrasion Exceeds all UL 1426, USCG Charterboart (CFR Title 46), CSA and ABYC standards.
Part No: 117902
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports
Adjusts and locks with a twist of a knob. Does not protrude into cabin when in closed position.
Part No: 1179DP1CHR
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports
Adjusts and locks with a twist of a knob. Does not protrude into cabin when in closed position.
Part No: 1179DP2CHR
|
|
|
|
Home -> Electrical -> Shore Power->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 117A
|
|
|
