Top Sellers
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
Fuel and Carburetor Filters from MERCURY MARINE
In-Line outboard filters with plastic bowls fit 1/4" or 5/16" fuel lines. Carburetor filters fit Rochester 2- and 4-barrel or MerCarb 2-barrel (Model 1661800) or Rochester 2-barrel w/Carter fuel pump (Model 1661727). Fuel Type: Gasoline . Flow Rate: n/a . Filtering Fidelity: n/a . Mounting Head: n/a . Inlets/Outlets: 1/4" . Element Dimensions: n/a . Bowl Material: Plastic . Drain Fitting: n/a .
|
Selma Splicing Fids Set from SAMSON ROPE
Stainless steel fids make burying line much easier. Work with 1/8"–7/16" single braids or 1/4"–9/16" double braids.
|
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Low-Permeation Fuel Hose, 1/2" ID, 250' Max. Length from SHIELDS RUBBER
Special design NBR tube with an embedded plastic barrier layer limits permeation. The design of this hose provides easy coupling insertion and the NBR/PVC cover is weather and UV resistant. The hose is also polyester reinforced and fire-resistant. Fuel Type: Fuel feed (gasoline up to 85% ethanol blended fuels/diesel/bio-diesel all blends) . Approvals: SAE J1527 Type A1-15 and ISO 7840 Type A1 . Construction: Reinforced with high strength synthetics to resist gasoline/alcohol permeation .
|
2" ID, 90° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
|
Series 315 Outboard Fuel Hose - 3/8"ID from SHIELDS RUBBER
Premium-quality fuel hose designed for outboard feed and vent lines. Remains flexible at low temperatures and resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 specifications. Should not be used in applications requiring the use of Type B1 fuel feed line.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
Ignition Switch J/E W/Key from SIERRA
Johnson/Evinrude No. s 386545, 386496, 379047 and 378238. Stainless steel and Delrin construction. 5 terminals with special waterproofing seal and drain holes. Brass chrome plated face nut, back-up nut and washer. Silvered contacts, stainless steel terminals and springs, brass screws. Mounting bushing 1-1/2" long.
|
Anchor Chain Tensioner from JOHNSON, C.S.
Holds chain up to 5/16" firmly to keep your anchor quiet on its roller. A quick-release pin holds the welded handle securely in a tensioned position. 316 stainless steel.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
|
1, 1-1, 50' from SHIELDS RUBBER, 16"OD from SHIELDS RUBBER
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Stainless-Steel 12V Horns
Stainless steel horn looks good, sounds good These horns will retain their gleaming good looks for years thanks to their stainless construction. Unlike some other look-alike horns, even the trumpet bells are all stainless—not plastic. The pleasing tone commands attention without being obnoxious. Pre-wired for easy hook-up to your boat’s 12-volt system. Material: Stainless Steel . Single: 4"W x 14"L. Double: 8"W x 16"L. Design Standards: ABYC for boats up to 20 meters .
Part No: 11566
|
|
|
|
Home -> Fishing -> Fishing Accessories->Coastlock Terminal, Snap, Thimble Kits & Replacement Parts
One coastlock end snap, thimble, bumper and three sleeves.
Part No: 1157
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tuff End™ Round Fenders
Tough enough to meet the punishing demands of the commercial marine industry Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. The curved design hole prevents chafing. Compressor or football needle valve inflation. Made from thick-walled marine grade vinyl for durability. Injection molded ends for high strength. Trivalve for easy inflation with football needle or compressor. Great for larger boats or rafting! .
Part No: 1157
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
For Perko Masthead/White All-Round Light Models 1183, 1196 & 1197.
Part No: 1158DP0BLK
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Slotted Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 1159
|
|
|
|
Home -> Electrical -> Electrical Wire -> Battery Cable->Battery Cable
Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing Premium vinyl insulation that resists salt water, battery acid, oil, gas and UV Rated at 600V and 105 degrees C Heavy duty insulation, resistant to heat and abrasion Exceeds all UL 1426, USCG Charterboart (CFR Title 46) and ABYC standards Sold by the foot up to 50' or 100' standard pack, as indicated .
Part No: 115910
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11593
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11594
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11597
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts, Hex Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 115E
|
|
|
|
Home -> Seating & Covers -> Seating->Deluxe Captain's Stand Console
This solid, attractively styled console with recessed drink holders is lightweight, yet incredibly strong. A large access door makes installation and wiring simple. Roto-molded plastic. Measures: 32. 25"H x 26.
Part No: 115W-204
|
|
|
|
Home -> Seating & Covers -> Seating->Deluxe Captain's Stand Console
This solid, attractively styled console with recessed drink holders is lightweight, yet incredibly strong. A large access door makes installation and wiring simple. Roto-molded plastic. Measures: 32. 25"H x 26.
Part No: 115W-221
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 101 No-Odor Super Head Hose
Thick, tough multilayer rayon cord and rubber hose specially compounded to give maximum resistance to odor permeation and toilet chemicals. Sold by the foot. Application: Toilet to holding tank, holding tank pump-out . Material: EDPM rubber . Reinforcement: Wire helix and two fabric plies . Temperature Range: 212°F maximum . Vacuum Rating: 28 . Minimum Bend Radius: N/A .
Part No: 116-101-1000
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 101 No-Odor Super Head Hose
Thick, tough multilayer rayon cord and rubber hose specially compounded to give maximum resistance to odor permeation and toilet chemicals. Sold by the foot. Application: Toilet to holding tank, holding tank pump-out . Material: EDPM rubber . Reinforcement: Wire helix and two fabric plies . Temperature Range: 212°F maximum . Vacuum Rating: 28 . Minimum Bend Radius: N/A .
Part No: 116-101-1003
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 101 No-Odor Super Head Hose
Thick, tough multilayer rayon cord and rubber hose specially compounded to give maximum resistance to odor permeation and toilet chemicals. Sold by the foot. Application: Toilet to holding tank, holding tank pump-out . Material: EDPM rubber . Reinforcement: Wire helix and two fabric plies . Temperature Range: 212°F maximum . Vacuum Rating: 28 . Minimum Bend Radius: N/A .
Part No: 116-101-1120
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 101 No-Odor Super Head Hose
Thick, tough multilayer rayon cord and rubber hose specially compounded to give maximum resistance to odor permeation and toilet chemicals. Sold by the foot. Application: Toilet to holding tank, holding tank pump-out . Material: EDPM rubber . Reinforcement: Wire helix and two fabric plies . Temperature Range: 212°F maximum . Vacuum Rating: 28 . Minimum Bend Radius: N/A .
Part No: 116-101-1123
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Poly X Sanitation Hose
With a lifetime warranty against odor permeation, this is the best sanitation hose we offer. It combines the flexibility of rubber hose with the permeation resistance of polyurethane. It’s easy to slip on to most fittings and the polyurethane cover is very abrasion resistant. The glossy cover makes clean up easy. Material: Smooth white neoprene inner tube with two textile fabric plies, glossy black polyurethane outer cover. Reinforcement: One steel wire. Temperature Range: –22° to +195°F.
Part No: 116-105-1000
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Poly X Sanitation Hose
With a lifetime warranty against odor permeation, this is the best sanitation hose we offer. It combines the flexibility of rubber hose with the permeation resistance of polyurethane. It’s easy to slip on to most fittings and the polyurethane cover is very abrasion resistant. The glossy cover makes clean up easy. Material: Smooth white neoprene inner tube with two textile fabric plies, glossy black polyurethane outer cover. Reinforcement: One steel wire. Temperature Range: –22° to +195°F.
Part No: 116-105-1120
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 120 Bilgeflex Hose
Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline. Material: Corrugated polyethylene, with clamping cuff every foot. Reinforcement: None. Temperature: N/A.
Part No: 116-120-0346W
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 120 Bilgeflex Hose
Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline. Material: Corrugated polyethylene, with clamping cuff every foot. Reinforcement: None. Temperature: N/A.
Part No: 116-120-1126W
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 120 Bilgeflex Hose
Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline. Material: Corrugated polyethylene, with clamping cuff every foot. Reinforcement: None. Temperature: N/A.
Part No: 116-120-1146W
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 120 Bilgeflex Hose
Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline. Material: Corrugated polyethylene, with clamping cuff every foot. Reinforcement: None. Temperature: N/A.
Part No: 116-120-1186W
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 135 Heavy-Duty Water Hose
Use for engine water, sinks, icebox, drain lines, bilge pumps and air conditioners. Sold per foot; 50' maximum continuous length. Application: Engine heater hose, heat exchanger, A/C circulation; sink, icebox shower and livewell drain lines, head intake. Material: EDPM rubber. Reinforcement: Polyester fabric spiral. Temperature Range: –40° to 190°F. Working Pressure: 200psi.
Part No: 116-135-0126B
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 135 Heavy-Duty Water Hose
Use for engine water, sinks, icebox, drain lines, bilge pumps and air conditioners. Sold per foot; 50' maximum continuous length. Application: Engine heater hose, heat exchanger, A/C circulation; sink, icebox shower and livewell drain lines, head intake. Material: EDPM rubber. Reinforcement: Polyester fabric spiral. Temperature Range: –40° to 190°F. Working Pressure: 200psi.
Part No: 116-135-0346B
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 135 Heavy-Duty Water Hose
Use for engine water, sinks, icebox, drain lines, bilge pumps and air conditioners. Sold per foot; 50' maximum continuous length. Application: Engine heater hose, heat exchanger, A/C circulation; sink, icebox shower and livewell drain lines, head intake. Material: EDPM rubber. Reinforcement: Polyester fabric spiral. Temperature Range: –40° to 190°F. Working Pressure: 200psi.
Part No: 116-135-0586B
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 135 Heavy-Duty Water Hose
Use for engine water, sinks, icebox, drain lines, bilge pumps and air conditioners. Sold per foot; 50' maximum continuous length. Application: Engine heater hose, heat exchanger, A/C circulation; sink, icebox shower and livewell drain lines, head intake. Material: EDPM rubber. Reinforcement: Polyester fabric spiral. Temperature Range: –40° to 190°F. Working Pressure: 200psi.
Part No: 116-135-1006B
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose
Recommended for vanity, sink, shower drain lines and above-waterline scuppers. Also excellent for high-capacity manual pump discharge. Flexible, abrasion-resistant vinyl blend with vinyl coated helical wire. Nylon reinforcement. Sold per foot. Standard pack is 50'. ID: 1 1/2" Application: Bilge Pump intake/discharge, drains. Material: PVC. Reinforcement: Steel wire. Temperature Range: N/A. Burst Strength: N/A.
Part No: 116-140-1126
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 141 Multiflex Hose
For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill. Material: FDA formula PVC. Reinforcement: Vinyl helix. Temperature Range: Ambient temperatures. Approvals: FDA.
Part No: 116-141-0346B
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 141 Multiflex Hose
For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill. Material: FDA formula PVC. Reinforcement: Vinyl helix. Temperature Range: Ambient temperatures. Approvals: FDA.
Part No: 116-141-1006B
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 141 Multiflex Hose
For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill. Material: FDA formula PVC. Reinforcement: Vinyl helix. Temperature Range: Ambient temperatures. Approvals: FDA.
Part No: 116-141-1126B
|
|
|