Top Sellers
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
|
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Drill Pump Kit from JABSCO
The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube. Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
Shut-Off Switch from SHURFLO
>Adaptable to any 1/2" hose, this shut-off switch allows for easy on/off operation.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Electronic Horn, Black from AQUA-SIGNAL
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
|
|
1, 2", 2" from PERKO, 2" Pin from HAYN ENTERPRISES
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome plated zinc alloy or chrome plated stamped brass. Chrome plated zinc alloy: 1293DP4: Pin Height: 2" by 2" open width Each hinge requires four #8 fasteners . 1293DP9: Pin Height: 3" by 3" open width Each hinge requires six #10 fasteners . . Heavy gauge chrome plated stamped brass: 0952DP4: Pin Height: 2" by 2" open width Each hinge requires six #6 fasteners . 0952DP6: Pin Height: 2-1/2" by 2-1/2" open width Each hinge requires six #8 fasteners .
Part No: 1293DP4CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Open width: 2" Pin length: 2-1/2" Requires six #8 fasteners Sold in pairs.
Part No: 1293DP5CHR
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome plated zinc alloy or chrome plated stamped brass. Chrome plated zinc alloy: 1293DP4: Pin Height: 2" by 2" open width Each hinge requires four #8 fasteners . 1293DP9: Pin Height: 3" by 3" open width Each hinge requires six #10 fasteners . . Heavy gauge chrome plated stamped brass: 0952DP4: Pin Height: 2" by 2" open width Each hinge requires six #6 fasteners . 0952DP6: Pin Height: 2-1/2" by 2-1/2" open width Each hinge requires six #8 fasteners .
Part No: 1293DP9CHR
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Lag Screws - Bulk Packs
Type 18-8 stainless steel.
Part No: 1293E
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Lag Screws - Bulk Packs
Type 18-8 stainless steel.
Part No: 1294E
|
|
|
|
Home -> Sailboat -> Rigging Products
Attaches quickly to round mast or boom extrusion with a short loop of shock cord and provides easily read apparent wind direction.
Part No: 1295
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories
Chrome-plated zinc eye and socket. The 3/8" dia. eye can be permanently attached to fender lines.
Part No: 1299DP0CHR
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts, Hex Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 129D
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Traditional Hydraulic Trim Tabs
Bennett Standard Trim Tabs fit boats from 15'-38' (larger sets available). Using the helm control, you can adjust the trim tabs individually or together to create the perfect cruising attitude. Increase speed, fuel economy, smooth a rough ride and get on plane faster. Precise adjustments to boat attitude are easy. Kits include: Two high-quality, 13-gauge, 304 stainless steel after-planes with strong nylon/composite actuators. Euro-style rocker switch control fits a standard 2 1/2" dia.
Part No: 129E
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->Premium 12V Receptacle and Plug
Designed to withstand the rigors of wet environments and constant motion. Receptacle has large contact surfaces and corrosion-resistant materials to ensure a solid contact and low voltage drop. Plug has a sealing ring around the shaft to keep out spray and to make it seat firmly in the outlet. Ground contacts engage the receptacle so the plug can’t be removed without turning it 90°.
Part No: 12BKT
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTE14
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTE516
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTE932
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Forks
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTF516
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Forks
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTF932
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTS14
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTS516
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Toggles
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTT516
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Toggles
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTT932
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Thumbscrews
Type 18-8 stainless steel.
Part No: 12D
|
|
|
|
Home -> Fishing -> Fishing Accessories
Preferred by anglers the world over More impact and abrasion resistant. Fast sinking. Superior tensile and knot strength. Seaguar 100% fluorocarbon leader material allows you to us a smaller test leader than comparable nylons or fluorocarbon for unmatched bait presentations. Spool length: 25 yds. LB. Test: 12. Diameter: 0.
Part No: 12FC25
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 12TFBJ
|
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 12TFBJB
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Manufactured from corrosion resistant marine grade materials with a unique interconnecting system that securely locks the plug into the receptacle resulting in a positive and moisture proof connection. Heavy duty cable/18 gauge wire. Watertight caps. Plug features an LED indicator light, moisture proof sealing ring, strain relief and built-in 10A fuse. SeaLink locking system. Works with any standard 12V plug and receptacle.
Part No: 12VAD
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->ConnectPro Trolling Motor Plug & Receptacle
Vibration-resistant, 12V trolling motor connectors incorporate a locking plug and waterproof “O” ring seal for a superior connection for 12V, 24V, 36V and combination systems.
Part No: 12VBP
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->ConnectPro Trolling Motor Plug & Receptacle
Vibration-resistant, 12V trolling motor connectors incorporate a locking plug and waterproof “O” ring seal for a superior connection for 12V, 24V, 36V and combination systems.
Part No: 12VBRAD
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->ConnectPro Trolling Motor Plug & Receptacle
Vibration-resistant, 12V trolling motor connectors incorporate a locking plug and waterproof “O” ring seal for a superior connection for 12V, 24V, 36V and combination systems.
Part No: 12VCP
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->Premium 12V Receptacle and Plug
Designed to withstand the rigors of wet environments and constant motion. Receptacle has large contact surfaces and corrosion-resistant materials to ensure a solid contact and low voltage drop. Plug has a sealing ring around the shaft to keep out spray and to make it seat firmly in the outlet. Ground contacts engage the receptacle so the plug can’t be removed without turning it 90°.
Part No: 12VPG
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->Premium 12V Receptacle and Plug
Designed to withstand the rigors of wet environments and constant motion. Receptacle has large contact surfaces and corrosion-resistant materials to ensure a solid contact and low voltage drop. Plug has a sealing ring around the shaft to keep out spray and to make it seat firmly in the outlet. Ground contacts engage the receptacle so the plug can’t be removed without turning it 90°.
Part No: 12VPK
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Premium 12V Receptacle and Plug
Designed to withstand the rigors of wet environments and constant motion. Receptacle has large contact surfaces and corrosion-resistant materials to ensure a solid contact and low voltage drop. Plug has a sealing ring around the shaft to keep out spray and to make it seat firmly in the outlet. Ground contacts engage the receptacle so the plug can’t be removed without turning it 90°.
Part No: 12VRC
|
|
|
