Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.

Barbed Hose Reducer, 1/4" to 1/2" from SEAFIT
Nylon Hose Reducers, Barbed.

1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.

3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .

Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.

Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.

Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.

Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.

Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .

Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .

CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.

Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .

Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.

Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.