Top Sellers
|
|
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
V700 Windlass from LEWMAR
The V700 is a compact, stainless steel windlass designed for power and sail boats. The elegant, low profile design makes windlass an attractive deck accessory. The "FallSafe" gypsy lock takes the load off the gear train while at anchor and also prevents accidental deployment while underway. Includes a heavy-duty, 316 stainless-steel control arm and stripper. Boat Length: to 35' . Rode Type: Rope/chain . Rode Size: 1/4" HT chain, 1/2" rope . Speed Up: 62' (110lb.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
14lb. Economy Anchor, 25' to 30 Boat Length, 740lb. SWL, 28-1/4"L x 21-1/2"W, 14-1/4" Fluke Length from TIEDOWN ENGINEERING
An economical "lunch hook" and spare anchor Strong steel pivoting fluke anchors are built to original Danforth dimensions and are ideal for holding in sand or mud in protected waters. Non-tapered shank, fully welded crown and L-shaped flukes. Hot dip galvanized. Style: Pivoting steel fluke . Material: Galvanized steel . Our most affordable fluke-style anchor. Cons: Lacks the strength of premium models. Not reliable for overnight holding or for use in grass, rocks or clay.
|
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
|
|
4" from SEAFIT, 4" Hose ID from SEAFIT, 2" Hose ID from SEAFIT, 3
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
Nylon Male Pipe-to-Hose Adapters.
Part No: 139906
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
Nylon Male Pipe-to-Hose Adapters.
Part No: 139907
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
Nylon Male Pipe-to-Hose Adapters.
Part No: 139908
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
Nylon Male Pipe-to-Hose Adapters.
Part No: 139909
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
Nylon Male Pipe-to-Hose Adapters.
Part No: 139910
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
Nylon Male Pipe-to-Hose Adapters.
Part No: 139911
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139920
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139921
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139922
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139923
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Garden Hose-to-Barb
Nylon Pipe Fittings.
Part No: 139926
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Garden Hose-to-Barb
Nylon Pipe Fittings.
Part No: 139927
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Garden Hose-to-Barb
Nylon Pipe Fittings.
Part No: 139928
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Couplers, Barbed
Nylon Hose Couplers, Barbed.
Part No: 139930
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Couplers, Barbed
Nylon Hose Couplers, Barbed.
Part No: 139931
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Couplers, Barbed
Nylon Hose Couplers, Barbed.
Part No: 139932
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Elbows, Barbed
Nylon Hose Elbows, Barbed.
Part No: 139940
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Elbows, Barbed
Nylon Hose Elbows, Barbed.
Part No: 139941
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Elbows, Barbed
Nylon Hose Elbows, Barbed.
Part No: 139942
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Elbows, Barbed
Nylon Hose Elbows, Barbed.
Part No: 139943
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Reducers, Barbed
Nylon Hose Reducers, Barbed.
Part No: 139950
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Reducers, Barbed
Nylon Hose Reducers, Barbed.
Part No: 139951
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Reducers, Barbed
Nylon Hose Reducers, Barbed.
Part No: 139952
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Reducers, Barbed
Nylon Hose Reducers, Barbed.
Part No: 139953
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Reducers, Barbed
Nylon Hose Reducers, Barbed.
Part No: 139954
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Tees, Barbed
Nylon Pipe Fittings.
Part No: 139960
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Tees, Barbed
Nylon Pipe Fittings.
Part No: 139961
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Tees, Barbed
Nylon Pipe Fittings.
Part No: 139962
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Plastic Plumbing Fittings->Nylon Female Garden Hose-to-Barb
Nylon Female Garden Hose-to-Barb.
Part No: 139970
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Plastic Plumbing Fittings->Nylon Female Garden Hose-to-Barb
Nylon Female Garden Hose-to-Barb.
Part No: 139971
|
|
|