Top Sellers
|
|
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
|
|
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Pro Baitmaster™ Heavy-Duty Livewell Pump from SHURFLO
The fast and easy way to change your oil With a sealed switch and splash-proof "Shurcote II" seamless motor shell, this pump thrives in wet environments, such as continuous-duty live well (tanks under 35 gallons) or wash down applications. It features a run-dry capability and is designed to not overheat with extended use. Switch Type: Sealed 45 psi pressure switch . Material: Glass-reinforced nylon body and base-plate . Port Sizes: 1/2" NPS male . Dimensions: 5. 4"H x 5.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
Impeller Kit -6, 8, 9.9,15HP 4 Stroke from MERCURY MARINE
Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7. 5hp) and Model 110/9. 8hp when the water impeller ID measures 0. 456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9. 9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Premium Engine Oil - SAE 30, gallon from WEST MARINE
Exceeds OEM requirements— will not void engine warranty. Recommended for engines requiring API CF-2 level performance. Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 or SAE 40 grade and API service classifications including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, Volvo and Mann. Heavy-duty formulation minimizes engine wear to provide long engine life. Exceeds Mack EO-K/2 and Allison C4 specifications and CID A-A-52306A requirements .
|
Flush Kit For 2- & 4-Stroke Outboards from MERCURY MARINE
Fits Mercury/Mariner 4 and 5hp 2-stroke outboards and 4, 5 and 6hp 4-stroke outboards.
|
|
2-4-C Lube W/Teflon - Three 3.5 oz Grease Gun Cartridges from MERCURY MARINE
A high quality multi-purpose lubricant to withstand extreme friction and also improve water resistance.
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
|
2" Long from FASCO FASTENERS, 4" Long from FASCO FASTENERS
|
|
Home -> Seating & Covers -> Seating
This popular, economical swingback seat serves double-duty as a livewell. It has thick, foamed-in insulation in the double walls of the 15. 5 gal. livewell, a recessed pocket for swingarm travel, rounded interior corners to protect bait and a Delrin® drain. Seat and back are marine-grade white vinyl-covered foam. Wide bottom flange for easy installation. Seat top is 19''H.
Part No: 1758-18U
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks->2" Solid Brass Combination Padlock
Set your own combination for easy recall. . Corrosion-resistant solid brass case. . Hardened steel shackle. Shackle: dia. 5/16".
Part No: 175BSDSPT
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->2" Solid Brass Combination Padlock
Set your own combination for easy recall. . Corrosion-resistant solid brass case. . Hardened steel shackle. Shackle: dia. 5/16".
Part No: 175D
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 176
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Accessories for "Little" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 176
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws with Slotted Flat Head
Brass Wood Screws with Slotted Flat Head, Package of 100.
Part No: 1769
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 177
|
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Accessories for "Little" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 177
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Round Trailer Fenders
Keep road debris from marring your boat’s hull. Constructed of 16-gauge steel. . Corrosion-resistant, galvanized finish can be painted or left plain. Available in four sizes:. For 8" tires: 6"H x 7"W x 20"L. For 12" tires: 6 1/2"H x 7"W x 23 1/2"L. For 13" tires: 11"H x 8"W x 27 3/8"L. For 14" and 15" tires: 13"H x 9"W x 31 1/2"L.
Part No: 17700G
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Round Trailer Fenders
Keep road debris from marring your boat’s hull. Constructed of 16-gauge steel. . Corrosion-resistant, galvanized finish can be painted or left plain. Available in four sizes:. For 8" tires: 6"H x 7"W x 20"L. For 12" tires: 6 1/2"H x 7"W x 23 1/2"L. For 13" tires: 11"H x 8"W x 27 3/8"L. For 14" and 15" tires: 13"H x 9"W x 31 1/2"L.
Part No: 17701G
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws with Slotted Flat Head
Brass Wood Screws with Slotted Flat Head, Package of 100.
Part No: 1771
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 1777
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Phillips Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 1779A
|
|
![Dia #10, Thread 24, 2", Pack of 4 from FASCO FASTENERS](http://images.westmarine.com/thumb/no_thumb.gif "Dia #10, Thread 24, 2", Pack of 4 from FASCO FASTENERS")
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
.
Part No: 1779MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> General Fasteners
Wood plugs to cover countersunk screw holes on your decking.
Part No: 178
|
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Accessories for "Little" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 178
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Change Pumps
Removes oil through the dipstick tube so there's no need for you to work your way under the engine. The Porta-Quick is supplied with both a 1/4'' x 40'' dipstick probe and a female garden hose connector which attaches the suction hose directly to dipstick tubes supplied with garden hose threads. The pump is reversible, which allows the container to be emptied just as neatly as it's filled. A retractable pouring spout is also included. Includes an 8' cord with alligator clip leads.
Part No: 17800-2000
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Round Trailer Fenders
Keep road debris from marring your boat’s hull. Constructed of 16-gauge steel. . Corrosion-resistant, galvanized finish can be painted or left plain. Available in four sizes:. For 8" tires: 6"H x 7"W x 20"L. For 12" tires: 6 1/2"H x 7"W x 23 1/2"L. For 13" tires: 11"H x 8"W x 27 3/8"L. For 14" and 15" tires: 13"H x 9"W x 31 1/2"L.
Part No: 17800G
|
|
|
|
Replaces G/M 3998976, OMC 909758, Volvo 835456-5, Volvo 841031-8.
Part No: 17822
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge. Pump Body: Bronze. Impeller: Nitrile. Shaft Seal: Buna Lip Type.
Part No: 17830-0012
|
|
|
|
|
Replaces Mercury 27-65577, Chrysler 3527753, Chrysler 4142048.
Part No: 17841
|
|
|
|
|
Replaces Mercury 27-52457, AquaPower 104, Chrysler 4142889, OMC508593, Yanmar YSC-10161-40-0C, MAL56C.
Part No: 17845
|
|
|
|
|
Single packed carburetor mounting gasket. Fits Holley with open plenum. Bolt pattern 4-5/32" x 5-5/8".
Part No: 17847
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws with Slotted Flat Head
Brass Wood Screws with Slotted Flat Head, Package of 100.
Part No: 1785
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
No spills!The Flat Tank Oil Changer eliminates the worry of spilling oil from top-heavy, open-container oil change systems. The compact design stows easily in a dock box or locker. Comes equipped with dipstick suction tube, battery clamp leads, and an on/off switch to make the pumping process simpler and easier. Capacity: 3 1/2 gal. Dimensions: 19"L x 12 1/2"W x 7 1/2"H . Extraction Point: Dipstick probe . Hose Length: 8'. Power Lead: 6' battery leads with clips.
Part No: 17860-0012-3
|
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Accessories for "Little" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 179
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Round Trailer Fenders
Keep road debris from marring your boat’s hull. Constructed of 16-gauge steel. . Corrosion-resistant, galvanized finish can be painted or left plain. Available in four sizes:. For 8" tires: 6"H x 7"W x 20"L. For 12" tires: 6 1/2"H x 7"W x 23 1/2"L. For 13" tires: 11"H x 8"W x 27 3/8"L. For 14" and 15" tires: 13"H x 9"W x 31 1/2"L.
Part No: 17900G
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Deluxe Angler Series Swingback Seat, With Rod Holders
Angler-friendly seats feature four rod-holders in the seat back for convenience and either dry storage space or a cooler/livewell. The cooler/livewell version has double walls and foam insulation with rounded corners to prevent bait from getting trapped. Includes a hinged lid with a recessed, rubberized gasket for a tight seal and a drain fitting. Both seats feature corrosion-resistant stainless steel swingarms, plush, ribbed marine-grade vinyl upholstery and polyethylene mounting plates.
Part No: 1792-18NIRH
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Deluxe Angler Series Swingback Seat, With Rod Holders
Angler-friendly seats feature four rod-holders in the seat back for convenience and either dry storage space or a cooler/livewell. The cooler/livewell version has double walls and foam insulation with rounded corners to prevent bait from getting trapped. Includes a hinged lid with a recessed, rubberized gasket for a tight seal and a drain fitting. Both seats feature corrosion-resistant stainless steel swingarms, plush, ribbed marine-grade vinyl upholstery and polyethylene mounting plates.
Part No: 1792-URH
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
Make the best possible use of space aboard your boat with this rugged, comfortable swingback seat. The hinged lid of the 70-quart container base is ideal for storing anchor tackle, life vests, clothing, etc. Seat and back feature thickly padded ribbed cushions. Swing arms are strong, polished aluminum. Measures 36 1/2''W x 35''H x 17 3/4''D with back attached.
Part No: 179218NI
|
|
|
