Midrail Cleat, Fits 1" x 1/8" Track, 1/4" Pin Dia., 1/2" Max. Line Size, 2500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.

Single Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .

Electric Toilet with Marine-Size Bowl, Integral Pump, Straight Discharge, 12V from RARITAN
Built-in discharge fitting accepts either 1-1/2" or 1" hose without the need for an adapter. Discharge pump can handle a vented loop with a maximum height of 6' and uses a full-sized joker valve to avoid clogging. Bowl rotates 90º for easy installation. Operation of “Household” style (160HF012) requires connection to vessel’s pressure water system. Marine style has integral intake pump. Draw: 18A @ 12V DC . Port Sizes: 3/4" inlet, 1 or 1-1/2" discharge .

Electric Toilet with Household-Syle Bowl, Integral Pump, Straight Discharge, 12V from RARITAN
Built-in discharge fitting accepts either 1-1/2" or 1" hose without the need for an adapter. Discharge pump can handle a vented loop with a maximum height of 6' and uses a full-sized joker valve to avoid clogging. Bowl rotates 90º for easy installation. Operation of “Household” style (160HF012) requires connection to vessel’s pressure water system. Marine style has integral intake pump. Draw: 18A @ 12V DC . Port Sizes: 3/4" inlet, 1 or 1-1/2" discharge .

Triple Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .

Single Sheave, No Cleat, 2:1 Purchase, 300lb. SWL from HARKEN
These end controls fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, these can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in pairs. Track Type: Fits all Small Boat track. Material: One-piece aluminum base. Ball Bearings: Carbon-black Delrin. Sheave Size: 1-1/8" (29mm). Length: 3-7/16" (87mm).

Double Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .

Midrail Cleat, Fits 1-1/4" x 3/16" Track, 5/16" Pin Dia., 5/8" Max. Line Size, 4500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.

Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.

700FF To 35' 5 3/4" 7" 9 5/8" 1/2" 1/4" HT 700lb. 35A (175 lb. load) 88' (175lb.) Free fall from LEWMAR
They feature controlled "lockoff" to start or stop anchor free-fall by simply pressing the "up/down" switch. This free-fall operation can also be disengaged to power down. Includes a new stainlesssteel fleming/stripper that withstands heavy loads. All come complete with Switch Gear and Installation kit. As an additional feature, in an emergency involving loss of power these windlasses can be operated manually with a standard 1/2" ratchet handle (sold separately).

2200gph Pump, 1-1/8" & 1-1/4" Port Sizes, 8.6A @ 12V DC, 7"H x 4-1/4"dia. from JOHNSON PUMPS
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .

1 1/2" ID Cast 316 Stainless Steel Side Mount Holders from TIGRESS TRADING COMP
1 1/8" & 1 1/2" Outrigger Holders and Replacement Tubes.

V12-0303 Flexible Vinyl Insert, L 70', H 1", W 1/2" from TACO PRODUCTS
Vinyl inserts hide rub rail fasteners for a clean look. They are available in continuous coils or reels for one piece installation without seams. For use with rigid and aluminum rub rails.

Double End Controls with 150 Cam (Pair), 3:1/4:1 Purchase, 900lb. SWL, 4-13/16" Length from HARKEN
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.

Double End Controls (Pair), 3:1/4:1 Purchase, 900lb. SWL, 4-13/16" Length from HARKEN
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.