Welcome! Please Sign-In
Top Sellers
CARB GASKET KIT from SIERRA
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Yamaha Carb Kit from SIERRA
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Replaces OMC P/N 378444 from SIERRA
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Impeller, 18-3062 from SIERRA
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
For Chrysler/Force, 89-817109A2 from SIERRA
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
60GPH Cartridge, Replaces Racor S3227 from SIERRA
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
Replacement for Volvo Penta Inboard/Outboard #832846-0 from SIERRA
Replacement for Volvo Penta Inboard/Outboard #832846-0 from SIERRA
Hose connection replacements for Volvo Penta inboard/outboards.
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Fuel Filter Cartridge from SIERRA
Fuel Filter Cartridge from SIERRA
FILTER Replaces: Mercruiser 35-866171A01 Fits: 350 Mag MPI Alpha/Bravo, 350 Mag MPI Horizon Alpha/Bravo, 350 Mag MPI Horizon MIE, 350 Mag MPI MIE, 496 MAG, 496 MAG H. O. , 5. 0 MPI Alpha/Bravo, 8. 1L Inboard, 8. 1L Inboard H. O. , MX 6.
Sierra-Tube-Exhaust from SIERRA
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
Fits all Cobra. Replaces OMC 914036 from SIERRA
Fits all Cobra. Replaces OMC 914036 from SIERRA
Seals the exhaust/water flow from the manifold to the exhaust outlet in the drive.

Bravo from SIERRA, Hose from SIERRA, Mount from SIERRA

Hose from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Hose-Power Trim|**Hose-Power Trim.
Part No: 18-2131
Hose from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Hose-Power Trim|**Hose-Power Trim.
Part No: 18-2132
Hose from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Hose-Power Trim|**Hose-Power Trim.
Part No: 18-2133
Hose from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Hose-Power Trim|**Hose-Power Trim.
Part No: 18-2134
Hose from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Hose-Power Trim|**Hose-Power Trim.
Part No: 18-2135
Starboard Down, Bravo I/II/III & X/XR/XZ from SIERRA Home -> Engine Systems -> Trim Tabs & Hydrofoils->Tilt/Trim Hoses
High-pressure hoses, cylinder to connector. Sierra trim hoses include marine-grade stainless-steel fittings and tubing, precision made for an exact fit. Working pressure up to 3000 PSI.
Part No: 18-2136
Port Down, R/MR/Alpha I 15 9/16" tube, Prestolite pump; Bravo I/II/III & X/XR/XZ from SIERRA Home -> Engine Systems -> Trim Tabs & Hydrofoils->Tilt/Trim Hoses
High-pressure hoses, cylinder to connector. Sierra trim hoses include marine-grade stainless-steel fittings and tubing, precision made for an exact fit. Working pressure up to 3000 PSI.
Part No: 18-2137
Bearing from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Bearing-Pivot Pin|**Bearing-Pivot Pin.
Part No: 18-2138
Boltkit from SIERRA Home -> Engine Systems -> Engine Parts
**Bolt Kit-EngineMount|**Bolt Kit-EngineMount.
Part No: 18-2140
Engine Mount Bolt Kit - Mercruiser from SIERRA Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Replaces Mercruiser 10-97934A1 For R/MR/Alpha I/ Gen II/Bravo.
Part No: 18-2141
18-2142 from SIERRA Home -> Engine Systems -> Engine Parts->Trim Cylinders
Sierra Power Trim Cylinders feature a high-gloss finish, excellent corrosion resistance and a marine-grade stainless-steel shaft. Tested for safety and durability. Click to view Trim Cylinder Application Chart (PDF).
Part No: 18-2142
Mount from SIERRA Home -> Engine Systems -> Engine Parts
**Motor Mount|**Motor Mount.
Part No: 18-2143
Mount from SIERRA Home -> Engine Systems -> Engine Parts
**Motor Mount|**Motor Mount.
Part No: 18-2144
Standard Shift Cable, Bravo from SIERRA Home -> Engine Systems -> Propellers & Drive Trains->Lower Shift Cable Kits
Worn shift cables can cause shifting difficulties. The result can be damage to your gears. If your boat is hard to shift try our new Extreme Shift Cables for the best in effortless shifting. Kit parts with an E suffix use Extreme Shift Cables or are components of Extreme Shift Cable kits. Shift cable kits include all gaskets, bellows, and ends required for installation. Caution: some older models may have been retrofitted to accept aft installation cables.
Part No: 18-2145
Extreme Shift Cable, Bravo from SIERRA Home -> Engine Systems -> Propellers & Drive Trains->Lower Shift Cable Kits
Worn shift cables can cause shifting difficulties. The result can be damage to your gears. If your boat is hard to shift try our new Extreme Shift Cables for the best in effortless shifting. Kit parts with an E suffix use Extreme Shift Cables or are components of Extreme Shift Cable kits. Shift cable kits include all gaskets, bellows, and ends required for installation. Caution: some older models may have been retrofitted to accept aft installation cables.
Part No: 18-2145E
Yoke from SIERRA Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts
**Yoke|**Yoke.
Part No: 18-2146
Guide End Kit, Standard Kit for Bravo, #1 Units-Alpha/Alpha I Gen II for aft installation until 1983 & up, new style no support tube from SIERRA Home -> Engine Systems -> Propellers & Drive Trains->Lower Shift Cable Kits
Worn shift cables can cause shifting difficulties. The result can be damage to your gears. If your boat is hard to shift try our new Extreme Shift Cables for the best in effortless shifting. Kit parts with an E suffix use Extreme Shift Cables or are components of Extreme Shift Cable kits. Shift cable kits include all gaskets, bellows, and ends required for installation. Caution: some older models may have been retrofitted to accept aft installation cables.
Part No: 18-2149
Pivotpin from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Pin-Pivot 7-1/2|**Pin-Pivot 7-1/2.
Part No: 18-2151
Pivotpin from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Pin-Pivot 10-1/2|**Pin-Pivot 10-1/2.
Part No: 18-2152
Pivotpin from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Pin-Pivot Setting|**Pin-Pivot Setting.
Part No: 18-2153
Shift Bushing from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
Replaces: Mercruiser Inboard/Outboard #23-30617A2 Mercruiser & Alpha 1 S/N 1684188 and up.
Part No: 18-2154
Shift Shaft Housing Bushing - Mercury/Mariner from SIERRA Home -> Engine Systems -> Engine Parts
Replaces: 23-77631A2 35 - 200 HP.
Part No: 18-2155
Tilt Shaft - OMC Sterndrive from SIERRA Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts
Replaces 980183 For I/O 1964-86 except Cobra.
Part No: 18-2156
Standard Shift Cable, #1 Units-aft installation until 1983 to 90, uses support tube from SIERRA Home -> Engine Systems -> Propellers & Drive Trains->Lower Shift Cable Kits
Worn shift cables can cause shifting difficulties. The result can be damage to your gears. If your boat is hard to shift try our new Extreme Shift Cables for the best in effortless shifting. Kit parts with an E suffix use Extreme Shift Cables or are components of Extreme Shift Cable kits. Shift cable kits include all gaskets, bellows, and ends required for installation. Caution: some older models may have been retrofitted to accept aft installation cables.
Part No: 18-2157
Standard Shift Cable, #1 Units-forward installation until 1982 from SIERRA Home -> Engine Systems -> Propellers & Drive Trains->Lower Shift Cable Kits
Worn shift cables can cause shifting difficulties. The result can be damage to your gears. If your boat is hard to shift try our new Extreme Shift Cables for the best in effortless shifting. Kit parts with an E suffix use Extreme Shift Cables or are components of Extreme Shift Cable kits. Shift cable kits include all gaskets, bellows, and ends required for installation. Caution: some older models may have been retrofitted to accept aft installation cables.
Part No: 18-2158
Sierra-Shift Arm Merc from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
.
Part No: 18-2161
Screw from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Shift Slide and Screw|**Shift Slide and Screw.
Part No: 18-2162E
Screw from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Shift Slide Screw (5)|**Shift Slide Screw (5).
Part No: 18-2163E-9
Cam from SIERRA Home -> Engine Systems -> Control Systems -> Engine Controls
**Cam-Control Box|**Cam-Control Box.
Part No: 18-2165
Propshaft from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Shaft-Prop|**Shaft-Prop.
Part No: 18-2166
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12