Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
|
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Exhaust Tube, Mercruiser from SIERRA
Replacement for Mercruiser Inboard/Outboard #32-90949T .
|
Fuel Filter Cartridge from SIERRA
FILTER Replaces: Mercruiser 35-866171A01 Fits: 350 Mag MPI Alpha/Bravo, 350 Mag MPI Horizon Alpha/Bravo, 350 Mag MPI Horizon MIE, 350 Mag MPI MIE, 496 MAG, 496 MAG H. O. , 5. 0 MPI Alpha/Bravo, 8. 1L Inboard, 8. 1L Inboard H. O. , MX 6.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Fits all Cobra. Replaces OMC 914036 from SIERRA
Seals the exhaust/water flow from the manifold to the exhaust outlet in the drive.
|
|
Alternator from SIERRA, Mercruiser from SIERRA, Volvo from SIERRA
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
Replaces: 582262 For: V-4 & V-8 6700 rpm limit.
Part No: 18-5892
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Power Pack|**Power Pack.
Part No: 18-5893
|
|
|
|
Home -> Engine Systems -> Engine Parts
Thread Size: 3/8" - 18. Terminal Type: 10-32 Stud.
Part No: 18-5897
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces: Crusader - 700427, Mercruiser - 97258A1, OMC Sterndrive/Cobra - 171960 1/2" -- 14 NPT.
Part No: 18-5898
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Instrument Sending Units
For use with all Teleflex instruments which require them, including Red International, Blue Vector, White Sportsman, and Heavy Duty series instruments. Order dual senders for two-gauge installations (e. g.
Part No: 18-5899
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5900
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5901
|
|
|
|
Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5902
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5903
|
|
|
|
Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5905
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5906
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5907
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5908
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5910
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5911
|
|
|
|
Home -> Engine Systems -> Engine Parts->Permanent Magnet I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5913
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Starter-Reman|**Starter-Reman.
Part No: 18-5916
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
Replaces: 984628 3 bolt mount - Late style 4" diameter case.
Part No: 18-5917
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5918
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->Permanent Magnet I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5919
|
|
|
|
Home -> Engine Systems -> Engine Parts->Permanent Magnet I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5920
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Alternator|**Alternator.
Part No: 18-5929
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Alternator|**Alternator.
Part No: 18-5939
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Alternator|**Alternator.
Part No: 18-5943
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-5950
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-5951
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-5954
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-5957
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-5960
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-5964
|
|
|