Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
|
In-Line Fuel Filter - 5/16 from MERCURY MARINE
An Assortment of Fuel and Carburetor filters for Mercury Engines.
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.
|
Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Surface-Mount Gasoline Fume Detector from MARINE TECHNLOGIES
Here’s affordable protection from a UL Marine-listed detector designed to warn you of explosive gas accumulation. With a warning light and audible alarm, the detector alerts you to gasoline fumes, hydrogen gas from batteries, propane, alcohol, acetone and other potentially explosive fumes at 20% of their explosive level. Features one-touch On/Off/Test operation. Alarms: Warning light and audible alarm. Minimum Vapor Level for Activation: 20% of Lower Explosive Limit . Controls: ON/OFF/Test .
|
Quicksilver Water Eliminator from MERCURY MARINE
Quicksilver Water Eliminator removes water from your fuel tank. Just clip the unit to the fuel cap and lower into your fuel tank. The unit absorbs any water that it contacts, leaving you with dry fuel. Removing water directly from the fuel helps to prevent a number of service problems related to water contamination including corrosion, algae growth, damaged fuel injectors and carburetors, and power loss.
|
|
Clamp from SIERRA, Conn-fuel from SIERRA, Mariner from SIERRA
|
|
Home -> Engine Systems -> Fuel Tanks
Length: 8' Hose Diameter: 5/16" Silverado 2000 Premium Includes: Primer bulb 5/16" diameter (18-8004) with hose clamps. Two fuel connectors for tank and engine (18-8056).
Part No: 18-8009
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Has older style small quick connect on engine end and 5/16" NPT threaded fitting on the tank end. Primer bulb is included in the 8ft. (2. 44 m) assembly. Engine end fits Force 5 HP, and fits 9. 9/15HP (1997 & prior), and 25HP (3 cyl. Tank end has fitting for thread in style tank connection or attaching a bayonet. Length: 8' Hose Diameter: 5/16" Silverado 2000 Premium Includes: Primer bulb 5/16" diameter (18-8004) with hose clamps. Female tank end fuel connector (18-8070).
Part No: 18-8010
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and a fuel line connector to engine (18-8062). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8011EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a 1/8" fuel line connector to tank (18-8054) and a 1/4" fuel line connector to engine (18-8055). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8012EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and one fuel line connector (18-8056). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8014EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes large capacity 3/8" ID primer bulb and two hose clamps.
Part No: 18-8015
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to tank (18-8091) and a fuel line connector to engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8016EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8005) and two fuel line connectors to tank and engine (18-80415). Length: 8' . Hose Diameter: 3/8" . Silverado 2000 Premium .
Part No: 18-8017EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and two Tohatsu large inlet fuel line connectors to tank and engine (18-8079). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8018EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and two small inlet fuel line connectors to tank and engine (18-8062). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits 3.
Part No: 18-8019EP
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
**Clamp-Snapper|**Clamp-Snapper.
Part No: 18-8020
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
**Clamp-Snapper (10)|**Clamp-Snapper (10).
Part No: 18-8020-9
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
**Clamp-Snapper|**Clamp-Snapper.
Part No: 18-8021
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
**Clamp-Snapper (10)|**Clamp-Snapper (10).
Part No: 18-8021-9
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Merc PT fuel line assembly Length: 12'.
Part No: 18-8023EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and a 1/4" hose barb to the tank (18-8055) and a fuel line connector to the engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8024EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to the tank (18-8070) and a fuel line connector to the engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8025EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to the tank (18-8079) and a fuel line connector to the engine (18-8088). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8027EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Silverado 1000 OE Equivalent Length: 8' Diameter: 5/16" Assembly includes: 18-8078 - Fuel connector to tank. 18-8079 - Fuel connector from tank to hose. 18-8004 - Primer Bulb. 18-8088 - Fuel connector from hose to engine. 18-8089 - Fuel connector to engine.
Part No: 18-8028
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose and a 3/8" primer bulb (18-8004). Length: 12' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8032EP
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
**Clamp-Snapper|**Clamp-Snapper.
Part No: 18-8034
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
**Clamp-Snapper (10)|**Clamp-Snapper (10).
Part No: 18-8034-9
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, a 3/8" primer bulb (18-8005), a fuel connector to the tank (18-80405) and a fuel connector to the engine (18-80404). Length: 6' . Hose Diameter: 3/8" . Silverado 2000 Premium .
Part No: 18-8035EP
|
|
|
|
Selected tank elbows - choose the model recommended by the manufacturer of your tank.
Part No: 18-8040
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel|**Conn-Fuel.
Part No: 18-80400
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel|**Conn-Fuel.
Part No: 18-80401
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Use with 18-8091.
Part No: 18-80402
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel|**Conn-Fuel.
Part No: 18-80403
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel|**Conn-Fuel.
Part No: 18-80404
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel|**Conn-Fuel.
Part No: 18-80405
|
|
|