Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Midrange Hexaratchet Ratchet Block, Single, 1,800lb. SWL, 14oz. from HARKEN
Stronger versions of the Hexaratchet II+2 with 8:1 holding power. Beefier posts and wraparound straps handle higher working loads. Sheave: Teflon-impregnated Hardkote anodized aluminum. Bearings: Delrin. Sheave Size: 3" (76mm). Line Diameter: 9/16" max. Cheek Material/Finish: Plastic with wrap-around stainless straps. Shackle/Strap Type: Heavy-duty forged swivel with three-way head; locks or rotates. Cleat: 1556 and 1566: 280 Cam-Matic.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
|
|
|
|
|
from HARKEN, SWL from HARKEN, White from BOATMATES, 4" Drop from FULTON
|
|
The seaworthy solution to handling trash aboard Resin frame with hinged cover mounts on any smooth surface with three suction cups or can be permanently mounted with screws. Holds standard grocery bags or plastic kitchen bags. Get one for the galley and one for the cockpit. Easy-to-mount resin frame.
Part No: 2132-1
|
|
|
|
|
The seaworthy solution to handling trash aboard Resin frame with hinged cover mounts on any smooth surface with three suction cups or can be permanently mounted with screws. Holds standard grocery bags or plastic kitchen bags. Get one for the galley and one for the cockpit. Easy-to-mount resin frame.
Part No: 2132-8
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage
Keep cockpit clutter to a minimum!The original instant organizer. Suction-mounts on any smooth surface in cockpit or cabin and holds fishing gear, binoculars or personal items. Keeps baits, pliers, and fillet knife safely stored. Commercial grade, UV resistant polypropylene. Suction mounts on any smooth surface. Can be permanently mounted with screws.
Part No: 2133-1
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> North & Central America->Mexico & Central America Charts
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 21338
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->GPS/Cell Phone Caddy
Compact organizer holds most hand-held GPS units and cellular phones. Can be mounted vertically or on any flat, smooth surface using the Super Suction Cups (included). Mounts permanently with screws . 6. 6"W x 3. 25"D x 4. 5"H .
Part No: 2134-1
|
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->GPS/Cell Phone Caddy
Compact organizer holds most hand-held GPS units and cellular phones. Can be mounted vertically or on any flat, smooth surface using the Super Suction Cups (included). Mounts permanently with screws . 6. 6"W x 3. 25"D x 4. 5"H .
Part No: 2134-8
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Removable Receiver Tube Ball Mounts
Removable ball mounts for use with most receivers with 2" x 2" openings. Shank hole size is 1". Available in steel or aluminum. Steel ball mounts are offered with a chromium or black powder coat finish. Mounts meet or exceed V-5 requirements. Removable ball platforms fit in most square receivers. For trailers with a maximum gross trailer weight of 5,000lb.
Part No: 21342
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> North & Central America->Mexico & Central America Charts
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 21342
|
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Removable Receiver Tube Ball Mounts
Removable ball mounts for use with most receivers with 2" x 2" openings. Shank hole size is 1". Available in steel or aluminum. Steel ball mounts are offered with a chromium or black powder coat finish. Mounts meet or exceed V-5 requirements. Removable ball platforms fit in most square receivers. For trailers with a maximum gross trailer weight of 5,000lb.
Part No: 21344
|
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Removable Receiver Tube Ball Mounts
Removable ball mounts for use with most receivers with 2" x 2" openings. Shank hole size is 1". Available in steel or aluminum. Steel ball mounts are offered with a chromium or black powder coat finish. Mounts meet or exceed V-5 requirements. Removable ball platforms fit in most square receivers. For trailers with a maximum gross trailer weight of 5,000lb.
Part No: 21346
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2135
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins->Communications Caddy
Compact, easy-to-mount organizer keeps communication devices safe and within easy reach. Small enough to fit near the helm of the smallest boat. Holds most handheld VHF and FRS radios. Mounts either on the back or on the bottom using the two large Super Suction cups, included. Mount it where you need it. , stow it away when you don't. Can also be mounted permanently with screws or marine grade adhesive strips. Molded from commercial grade marine resins. 4. 5"H x 3. 5"W x 2.
Part No: 2135-1
|
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins->Communications Caddy
Compact, easy-to-mount organizer keeps communication devices safe and within easy reach. Small enough to fit near the helm of the smallest boat. Holds most handheld VHF and FRS radios. Mounts either on the back or on the bottom using the two large Super Suction cups, included. Mount it where you need it. , stow it away when you don't. Can also be mounted permanently with screws or marine grade adhesive strips. Molded from commercial grade marine resins. 4. 5"H x 3. 5"W x 2.
Part No: 2135-8
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Wood Screws - Slotted Flat Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2135D
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2136
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders
Super compact and fits almost anywhereHolds your favorite beverage, a couple of lures, and has a place for your sunglasses or a set of pliers so they're right where you need them. Mounts both vertically and on a flat surface. Includes suction cup mount. 6"W x 4. 25"D x 3.
Part No: 2136-1
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2138
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> North & Central America->Mexico & Central America Charts
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 21384
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2139
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Bronze Frearson (R & P) Flat Head Wood Screws - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 213A
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 213Q4
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2141
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2142
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2143
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2144
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Spar Hawk PVC Rain Jacket
.
Part No: 21440
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Spar Hawk PVC Rain Jacket
.
Part No: 21440
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Spar Hawk PVC Rain Jacket
.
Part No: 21440
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Spar Hawk PVC Rain Jacket
.
Part No: 21440
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Spar Hawk PVC Rain Jacket
.
Part No: 21440
|
|
|
