Top Sellers
Stainless Steel Ultimate Fastener Kit from FASCO FASTENERS
Large quantities make the Ultimate Stainless Steel Fastener kit unique!A very comprehensive selection of the most popular Stainless Steel fasteners, including 8, 10 & 1/4" diameter machine screws up to 2" in length with nuts, nylocks & washers. 10 - 8/32 x 3/4 Phillips Oval Machine Screw . 10 - 8/32 x 1 Phillips Oval Machine Screw . 10 - 8/32 x 1-1/2 Phillips Oval Machine Screw . 10 - 10/24 x 3/4 Phillips Oval Machine Screw . 10 - 10/24 x 1-1/2 Phillips Oval Machine Screw .
|
Black Anodized Track, 1-1/4" x 8', 5/16" FH Fasteners from SCHAEFER
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
|
Black Anodized Track, 1-1/4" x 4', 5/16" FH Fasteners from SCHAEFER
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
|
8"L Flat Head Cleat, 2-1/8"H, Requires Two 5/16" FHMS Fasteners from SEADOG
Beefy cleats for docks or work boats. Galvanized steel for corrosion resistance.
|
5/16" Stock Dia. Pad Eye, 3/4" Opening Ht., 7500lb. SWL, 5/16" FHMS Fasteners from WICHARD
These pad eyes fold up when you need them and down when you don’t! Ideal for lifting eyes on trailerable boats, foredeck pad eyes for staysail tacks, foreguys and jacklines. Requires three flathead bolts or machine screws. A friction lock keeps them up while in use. Forged 17. 4PH for greater strength.
|
Bullet Block, Double, 400lb. SWL, 2.5oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Cheek, 300lb. SWL, 1.3oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Single, 300lb. SWL, 1.0oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Triple with Cam, 600lb. SWL, 7.0oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Single Swivel, 300lb. SWL, 1.5oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Triple, 600lb. SWL, 3.8oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Double with Becket, 400lb. SWL, 2.8oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Pivoting Exit with Cam, 150lb. SWL, 3.8oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Hatch - Ocean 10 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
|
from HARKEN, 5 from FASCO FASTENERS, 40000 from OCEAN GRAFIX
|
|
Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Hawaiian and Pacific Islands Print-on-Demand Charts
Print-on-Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts.
Part No: 19441 POD
|
|
|
|
Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Hawaiian and Pacific Islands Print-on-Demand Charts
Print-on-Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts.
Part No: 19442 POD
|
|
|
Electrical -> Exterior & Navigation Lighting
This 180,000 candlepower remote-controlled searchlight is easy to operate and install. Ocular design provides 18º up and 45º down pitch for enhanced visibility. Dual lamp design provides redundancy for safety. Includes Point Pad style remote control with flush and surface mount. Electronics located in the water-resistant light head for protection. Beam Strength: 180,000cp . Case Material: UV ASA plastic . Case Dimensions: 7. 5" x 8. 75" x 7. 5" .
Part No: 1946
|
|
|
|
Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Hawaiian and Pacific Islands Print-on-Demand Charts
Print-on-Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts.
Part No: 19461 POD
|
|
|
Cabin & Galley -> Appliances & Cookware -> Cookware
Use the ribbed side of this cast aluminum two-burner grill/griddle for searing meats and for tasty low-fat cooking. Flip it over and use the smooth side for general purpose griddle cooking. Heavy cast aluminum . Will never rust or warp. Provides superior, even cooking. Both sides have a non-stick coating.
Part No: 19462
|
|
|
Fasteners -> Mechanical Fasteners->Brass Screw Eyes - Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 1948
|
|
|
|
Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Hawaiian and Pacific Islands Print-on-Demand Charts
Print-on-Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts.
Part No: 19480 POD
|
|
|
|
Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Hawaiian and Pacific Islands Print-on-Demand Charts
Print-on-Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts.
Part No: 19481 POD
|
|
|
|
Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Hawaiian and Pacific Islands Print-on-Demand Charts
Print-on-Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts.
Part No: 19483 POD
|
|
|
Cabin & Galley -> Bedding & Drapery -> Sleeping Bags, Bedrolls
The newest addition to the Sea to Summit Pocket series - the Pocket Shower is made of the same heat-resistant waterproof fabric and roll-top closure as our standard Dry Sacks. Built into the base is a compact showerhead that operates with an easy-to-use on/off twist mechanism. Fill the 10 Liter (2. The black fabric soaks up sun during the day at base-camp for a warm shower or fill it at the end of the day for a cool rinse. Gives about an 8 and a half minute shower with shower head fully open.
Part No: 195
|
|
|
Sailboat -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1950
|
|
|
|
Sailboat -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1951
|
|
|
Anchor & Docking -> Ladders, Ramps & Boat Hooks
Two-step ladder mounts on a space just 12. 5''W x 3. 5H. Pivoting step folds down for boarding. ladder stows upright against the transom. Velcro strap included. 1'' stainless tubing with PVC treads. Stainless fasteners and mounting hardware included. 15''H (15.
Part No: 19513:01
|
|
|
Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 1952
|
|
|
Paint & Maintenance -> Cleaners, Soaps & Polishes->Simple Green Marine
Here's a dependable cleaner/degreaser for your boat Easy to use just spray and wipe for spot cleanups. Cleans grease, oil, dirt and stains. Safe for fiberglass, painted surfaces and vinyl. 22oz.
Part No: 19520
|
|
|
Anchor & Docking -> Ladders, Ramps & Boat Hooks
Store your ladder "invisibly" under the transom platform or swim deck. This one slides open and angles outward into the water for stairlike climbing. Flat steps are comfortable for bare feet . 1" stainless tubing .
Part No: 19523:01
|
|
|
|
Paint & Maintenance -> Cleaners, Soaps & Polishes->Simple Green Marine
Here's a dependable cleaner/degreaser for your boat Easy to use just spray and wipe for spot cleanups. Cleans grease, oil, dirt and stains. Safe for fiberglass, painted surfaces and vinyl. 22oz.
Part No: 19528
|
|
|
Anchor & Docking -> Ladders, Ramps & Boat Hooks
Includes one stainless wrap around rail and one underside support rail that are reversible. Stainless steel construction with poly comfort steps.
Part No: 19536:01
|
|
|
Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories
Top-quality telescoping deck brush handleOur finest deck brush kit contains a 1" diameter, aircraft grade, triple-anodized aluminum telescoping (3' to 6') handle that features two non-slip hand grips and quick connect/disconnect. Includes a customizable brush decal that identifies this premium deck brush as yours, so when it circulates on the dock, you will be sure to get it back! Top-of-the-line deck brush gets deck cleaning done fast. Medium-bristle brush with bumper to protect surfaces.
Part No: 1954700
|
|
|
Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories->Signature Series Telescoping Handles
Versatile handle works with a variety of pads and accessoriesHighly polished aluminum handles are constructed of 1"dia. heavy-duty aircraft grade, triple anodized aluminum, to provide many years of maintenance-free use. These buoyant handles also feature two non-slip hand grips for superior control and stainless-steel, pushbutton, quick connect/disconnect allows for instant attachment of a variety of brushes and other cleaning aids. Push-button design for quick accessory change outs.
Part No: 1954767
|
|
|
Fasteners -> Mechanical Fasteners->Metric Hex Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1955
|
|
|
|
Sailboat -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1958
|
|
|
Fasteners -> Mechanical Fasteners->Machine Screws - Slotted Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 1959E
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Junior" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 196
|
![Dia #4, Length 3/4", Pack of 100 from FASCO FASTENERS](http://images.westmarine.com/thumb/2300309_t.jpg "Dia #4, Length 3/4", Pack of 100 from FASCO FASTENERS")
|
|
Fasteners -> Mechanical Fasteners->Wood Screws - Slotted Round Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 196
|
|
|
Cabin & Galley -> Appliances & Cookware->Dinnerware
Non-skid plates for the sea-going galley!This open-stock melamine dinnerware is available in three solid colors or a decorative flag pattern. The plates feature nonskid ring feet. All decorative dinnerware is dishwasher safe and may be used in microwaves for up to 90 seconds. Colors: White, Blue, Green, Flags. .
Part No: 1960
|
|
|
|
Sailboat -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1961
|
|
|
Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Steps - Fold out and over, telescope down easily Compact stowage - Steps fold over flat on platform Flat poly treads for increased comfort Securing strap included Electropolished stainless steel Standard Folding Gudgeons 4 steps, L deployed: 45. 50" (116cm), L stowed: 15. 50" (40cm) Overall height 1. 75" (4cm), W 12" (30. 5cm), L of gudgeons 6.
Part No: 19617-61:01
|
|
|
|
Cabin & Galley -> Appliances & Cookware->Dinnerware
Non-skid plates for the sea-going galley!This open-stock melamine dinnerware is available in three solid colors or a decorative flag pattern. The plates feature nonskid ring feet. All decorative dinnerware is dishwasher safe and may be used in microwaves for up to 90 seconds. Colors: White, Blue, Green, Flags. .
Part No: 1962
|
|
|
Fasteners -> Mechanical Fasteners->Silicon Bronze Ring Shank Nails - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 1963
|
|
