Top Sellers
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
|
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
|
|
|
4" Line from MEGAFEND, 8" Line from MEGAFEND, for 1"– 1-1
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG1025-3FT
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG1025-4FT
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG1520-2FT
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG1520-3FT
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG1520-4FT
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG3478-2FT
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG3478-3FT
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG3478-4FT
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Chafe Guards
Abrasion-resistant polyester is tough, yet supple enough to pass through chocks. 18''L guards include ties for attaching to your lines. . Guaranteed for 5 years against sun deterioration. . Sold in pairs.
Part No: CG58.18
|
|
|
|
Intra-coastal Waterway Cruising Guides & Chartbooks Cruising Guides.
Part No: CGNC
|
|
|
|
The only cruising guide devoted exclusively to South Carolina and Georgia, this book covers almost every body of water along the coast as far inland as it is safe to navigate.
Part No: CGSC-GA
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Comfortable handle allows for easy trailer positioning and gets your fingers away from sharp edges. Fits 1 7/8'' and 2'' couplers . Non-corroding finish.
Part No: CH 0701
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets
Keep heavy shore power cords and water hoses away from the water and off the gunwale. Thick-walled stainless steel cable guide with curved lower portion fits into most rod holders. 2-1/2" eye keeps cords high enough to clear toerails and railings and stands straight up as the pole is bent slightly. Electropolished. 28"H.
Part No: CH-1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
Part No: CH-1-08
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
Part No: CH-2-08
|
|
|
|
|**6 Chafe Protection 1/4 In.
Part No: CH01406
|
|
|
|
|**8 Chafe Protection 1/4 In.
Part No: CH01408
|
|
|
|
|**6 Chafe Protection 3/8 In.
Part No: CH03806
|
|
|
|
|**8 Chafe Protection 3/8 In.
Part No: CH03808
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
REPAIR KIT.
Part No: CH102A
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
Raritan CH102MW Crown Head Complete Inlet Pump Ass'y Post 1988.
Part No: CH102MW
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
Raritan CH120 Crown Head II Discharge Pump Wall.
Part No: CH120
|
|
|
|
Home -> Engine Systems -> Control Systems->CH Series Premium Engine Controls
Form meets function with these mechanical engine controls. Designed with a contoured grip for ergonomic hand-fitting comfort, these controls also provide a universal fit to any current 3300-/OEM type control cable and adapt to any current engine harness for inboards, outboards and I/Os. Both the Ch1700 side-mount and the CH7500 top-mount with right hand lever feature push-button warm-up and single lever shift and throttle operation with trim in the handle.
Part No: CH1700-000000
|
|
|
|
Home -> Engine Systems -> Control Systems->CH Series Premium Engine Controls
Form meets function with these mechanical engine controls. Designed with a contoured grip for ergonomic hand-fitting comfort, these controls also provide a universal fit to any current 3300-/OEM type control cable and adapt to any current engine harness for inboards, outboards and I/Os. Both the Ch1700 side-mount and the CH7500 top-mount with right hand lever feature push-button warm-up and single lever shift and throttle operation with trim in the handle.
Part No: CH1700-200010
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
PUMP BODY.
Part No: CH2
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
O-RING.
Part No: CH25
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls
External adjustable throttle brake to avoid throttle creep and overcome governor back pressure.
Part No: CH2500P
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
TUBING.
Part No: CH37
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
.
Part No: CH37E
|
|
|
|
Home -> Engine Systems -> Steering Systems
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
Part No: CH4451P
|
|
|