Top Sellers
|
|
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Gas Caddy from TODD ENTERPRISES
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
|
|
4-Cup 12V Coffee Maker from WARING
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
|
P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
The P750 de-ices diameter of approximately 60 feet Prevent damaging ice formation around your boat’s hull with a 3/4 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.
|
Standard Capacity Boji Water Softener, 5" x 24" from GENOVA PRODUCTS
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
|
4" Pin from HAYN ENTERPRISES, 3, 4" Thread from HAYN ENTERPRISES
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
870
880
890
900
910
920
930
940
950
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
990
1,000
1,010
1,020
1,030
1,040
1,050
1,060
1,100
1,200
1,260
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3495
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Wood Screws - Phillips Flat Head - Bulk Pack
Type 18-8 stainless steel.
Part No: 3496
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Wood Screws - Phillips Flat Head - Bulk Pack
Type 18-8 stainless steel.
Part No: 3497
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Wood Screws - Phillips Flat Head - Bulk Pack
Type 18-8 stainless steel.
Part No: 3498
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Wood Screws - Phillips Flat Head - Bulk Pack
Type 18-8 stainless steel.
Part No: 3499
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTE12
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTE716
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Forks
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTF12
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Forks
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTF716
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTS12
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTS38
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Toggles
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTT12
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Toggles
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTT716
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Large-Print Waterproof Charts
Not only do these special editions have much larger print but they combine other features which make them much easier to read and use. Larger, clearer “place names” make your destinations easier to find.
Part No: 34E
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Fishing & Diving Waterproof Charts
Special editions for fishing and diving! These charts have all of the great quality features you've come to expect from Waterproof Charts! They cover the fishing areas in complete detail, and pinpoint dozens of fishing areas and the fish caught in each area.
Part No: 34F
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> North & Central America->Florida & Gulf Region
Printed on both sides, these charts save you money! And because they are printed on synthetic paper, they are impervious to water, fresh or salt, so you can use them on deck in rain or spray. Convenient size—25"H x 38"W—makes them easy to fold and store. Used by the Coast Guard and the Navy, these charts are updated regularly and include Loran and GPS coordinates on most charts. Special editions for fishing and diving . Exact positions for wrecks and reefs .
Part No: 35
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Spark Plugs
High-quality plugs with all the features that make Champion the industry’s leader. Triple-coated shell for excellent corrosion resistance. Triple seal assembly that’s the strongest in the industry. Precision rolled threads that conform to all manufacturers’ specs. * Q and R type plugs only. Some plugs have been redesigned to accommodate the different heat ranges required for reformulated fuel. Before you order a spark plug, be sure to consult the manufacturer’s most current reference guide.
Part No: 35
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Mooring Anchors->Pyramid Mooring Anchors
Designed to penetrate the bottom and prevent dragging The Dor-Mor pyramid mooring anchor rapidly penetrates the bottom due to the high-point loading of its compact size and shape. The large surface area of the pyramid shape has a high suction effect which increases the deeper the anchor sets. Short shank allows mooring in more shallow water with less chain wrap-up and potential hull damage.
Part No: 35 PYRAMID
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Adhesives
A one-component, high-bond-strength, moisture-curing adhesive. Gluzilla is a high performance polyurethane (PUR) adhesive. It is 100% waterproof for wood, fiberglass, stone, metal, foam and 1000’s of other uses! These PUR systems have made a name for themselves in applications where other adhesives fail. USAGE: For the water- and weather-resistant bonding of wood, plastics, rock, metal, ceramics, insulation materials and concrete. Much higher temperatures can be tolerated for shorter periods .
Part No: 35-051
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
The assembly adhesive which also seals! Flex-Bond 5000 is the strong one-component adhesive and sealant with good adhesion to metallic surfaces even under the action of water. Thanks to the good initial tack, Flex-Bond 5000 permits uncomplicated and fast assembly. Safety Good adhesion to metallic surfaces even under the action of water. High temperature stability (from –40 °C to +100 °C). High UV stability. Aging resistance. Good resistance to water, cleaning agents, weak acids and alkalis.
Part No: 35-057
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Adhesives
The assembly adhesive which also seals! Bonding, Caulking, Bedding , Sealing High Quality, Elastic, one component adhesive and joint filler. It is very suitable for adhesive bonding of different materials in building, for interior construction and for exterior decoration. Thanks to the good initial tack, Flex-Bond 5000 permits uncomplicated and fast assembly. Safety Good adhesion to metallic surfaces even under the action of water. Structural properties. High UV stability. Aging resistance.
Part No: 35-058
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->"S" Cleats
The S-shape makes it easy to loop a rope around the horns. The wide bolt pattern and large bosses on the underside allow for secure fastening to the dock.
Part No: 35-10
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->"S" Cleats
The S-shape makes it easy to loop a rope around the horns. The wide bolt pattern and large bosses on the underside allow for secure fastening to the dock.
Part No: 35-12
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->"S" Cleats
The S-shape makes it easy to loop a rope around the horns. The wide bolt pattern and large bosses on the underside allow for secure fastening to the dock.
Part No: 35-15
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Bio Solv Acetone Replacement
Ideal for cleaning or preparing surfaces to be painted or epoxied and for cleaning cured paints, varnishes, and uncured epoxy. Can be used in place of Acetone or Xylene - has out-performed both during tests. Use less, clean more! No film residue when dried. Non evaporating and reusable. No environmentally hazardous ingredients. No Global Warming compounds. Technical Data A Bio-based solvent blend Flash Point 149 Deg F ASTM D93 closed cup Vapor presser . 54 mmHg @ 68 Deg F Specific Gravity .
Part No: 35-333
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Bio Solv Acetone Replacement
Ideal for cleaning or preparing surfaces to be painted or epoxied and for cleaning cured paints, varnishes, and uncured epoxy. Can be used in place of Acetone or Xylene - has out-performed both during tests. Use less, clean more! No film residue when dried. Non evaporating and reusable. No environmentally hazardous ingredients. No Global Warming compounds. Technical Data A Bio-based solvent blend Flash Point 149 Deg F ASTM D93 closed cup Vapor presser . 54 mmHg @ 68 Deg F Specific Gravity .
Part No: 35-335
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Bio Solv Acetone Replacement
Ideal for cleaning or preparing surfaces to be painted or epoxied and for cleaning cured paints, varnishes, and uncured epoxy. Can be used in place of Acetone or Xylene - has out-performed both during tests. Use less, clean more! No film residue when dried. Non evaporating and reusable. No environmentally hazardous ingredients. No Global Warming compounds. Technical Data A Bio-based solvent blend Flash Point 149 Deg F ASTM D93 closed cup Vapor presser . 54 mmHg @ 68 Deg F Specific Gravity .
Part No: 35-336
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Bio Solv Acetone Replacement
Ideal for cleaning or preparing surfaces to be painted or epoxied and for cleaning cured paints, varnishes, and uncured epoxy. Can be used in place of Acetone or Xylene - has out-performed both during tests. Use less, clean more! No film residue when dried. Non evaporating and reusable. No environmentally hazardous ingredients. No Global Warming compounds. Technical Data A Bio-based solvent blend Flash Point 149 Deg F ASTM D93 closed cup Vapor presser . 54 mmHg @ 68 Deg F Specific Gravity .
Part No: 35-339
|
|
|
|
Home -> Cordage -> Rigging Products->Terminal Locking Nuts
For check nut locking turnbuckles.
Part No: 35-601-1
|
|
|
|
|
Home -> Cordage -> Rigging Products->Terminal Locking Nuts
For check nut locking turnbuckles.
Part No: 35-602-1
|
|
|
