Top Sellers
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
DC Digital Voltmeter with Alarm from BLUE SEA SYSTEMS
Displays voltage from 0 to 60 Volts High and low voltage audio and visual alarms 3 levels of display brightness Programmable sleep mode blanks display for power conservation Splashproof front Applicable for 12, 24, 32, 36, and 42 Volt DC systems Specifications: Input Voltage: 7-60 Volts DC . Display Character Size in inches (mm): 9/16 (14. 29) . Minimum Power Consumption: 0. 60 Watt . Depth in inches (mm): 3. 40 (86. 36) . Maximum Power Consumption: 1. 00 Watt . Height in inches (mm): 2.
|
Panel Mount Thermal Circuit Breaker, 50A from BLUE SEA SYSTEMS
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.
|
Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
G/Flex 650 Hardener 4.75 Gal. from WEST SYSTEM
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .
|
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.
|
TastePURE™ Spring Fresh Water System Treatment from CAMCO PRODUCTS
Clean and deodorize boat and RV fresh water systems with this safe, biodegradable formula. Dewinterize freshwater tank and lines. Good for periodic cleaning, freshening and deodorizing. One step, no-measure solution requires no mixing or preparation. One gallon cleans up to a 100 gallon tank.
|
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
|
Seafari 170 Mini Watermaker from HRO SYSTEMS
Gain the luxury of high quality in a smaller capacity watermaker. The HRO Seafari 170 contains the most advanced features, equipment and benefits available on any reverse osmosis watermaker of its size. The Seafari 170 is the most cost effective and dependable way to solve your fresh water needs. Enjoy drinking water with no worries. Produces 7 U. S. Gallons per hour, 170 U. S. Rated Perfomance/Product Water Produced: ±15% at 820 PSIG/58 BAR, 77ºF/25ºC & 35,000PPM TDS typical sea water.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
|
175oz, 4oz, 100 Amp from BLUE SEA SYSTEMS, CM123009Z from CANADA METALS
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
910
920
930
940
950
960
970
980
990
994
995
996
997
998
999
1,000
1,001
1,002
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,012
1,013
1,014
1,015
1,016
1,017
1,018
1,019
1,020
1,021
1,022
1,023
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,200
1,260
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Leather Chafe Guards
The traditional chafe protection that many still prefer. If sleeve is to be placed over tail of eye splice, order one size larger than line diameter. Includes: 2 pre-punched 10"L leather sleeves . Waxed Twine .
Part No: 561016-1
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts->Iridium Spark Plugs
Iridium-plated electrodes gives these plugs superior performanceIridium IX Spark Plugs are the most technologically advanced high performance plugs available. Featuring a 0. 6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.
Part No: 2318
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Control Arm Kits
Control Arm Kits for various Lewmar windlasses.
Part No: 6061009
|
|
|
|
Home -> Cordage -> Rigging Products->Made-Up Shock Cords
Polyester elastic cord for maximum durability and UV resistance. Stainless-steel hooks and stainless stops will not pit, rust or discolor.
Part No: 065136
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Grade 316 stainless steel .
Part No: RF5271
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF13101-2
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
"TLC" for your plastic and acrylicCleans and removes fine scratches from clear plastic and acrylics. Works well on instrument panel covers, Plexiglas windows and wind deflectors. 8oz. bottle. 8oz.
Part No: M-1708
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Complete & Spare Pencil Engine Anodes
Complete brass plug with anode and replacement pencil anodes. Threads measured by NPT standards.
Part No: CME2
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Filters & Chemicals
Nontoxic conditioner prevents potable water from picking up smell or taste from water tank walls and pipes, and keeps water tasting and smelling fresh for up to one year. Safe and easy to use - add just one teaspoon to treat 100 gallons of water. 4 oz.
Part No: 091504
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7914
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware
Bimini Eye Straps - Zamak.
Part No: 1225
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Upper Casing Gasket|**Upper Casing Gasket.
Part No: 18-0739
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
This ”Little Jewel” combo unit is a terrific, space-saving tool. The strong and durable, zinc alloy mechanism helps make mill easy to grind. Made from a mixture of metals and plated with chrome.
Part No: 3180
|
|
|
|
Home -> Electrical -> Meters & Distribution->Sea Fuses
Compact fuses connect with 5/16" studs. The lowest cost fusing system for 100A to 300A requirements. 2000A interrupt capacity. Max 32V DC. 2-11/16" x 3/4". Holes: 2" on center.
Part No: 5101
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Bolt ( 3)|**Bolt ( 3).
Part No: 18-4749-9
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Outboard Anodes, OMC/Johnson/Evinrude
Outboard Anodes - OMC/Johnson/Evinrude Manufacturer: Canada Metals.
Part No: CM123009Z
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
**Terminal|**Terminal.
Part No: EC04700-100
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
**Terminal|**Terminal.
Part No: EC04670-100
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Complete & Spare Pencil Engine Anodes
Complete brass plug with anode and replacement pencil anodes. Threads measured by NPT standards.
Part No: CME1
|
|
|
|
Home -> Cordage -> Rigging Products->Split Backstay Adjuster
This adjusting car replaces separate blocks and a connecting member. Tandem sheaves eliminate severe flexing of the backstay, providing a neat, thoroughly functional fitting. The 38 Series with Delrin sheaves is intended for boats under 30ft. , while the husky 39 Series with aluminum sheaves is intended for boats up to 40 feet. 5 to 1 ratio between backstay base width and car height. Example: If backstay width is 5', car height should not exceed 7-1/2' to 8' in height off deck.
Part No: 38-213
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tailpieces
For connecting hoses to valves, seacocks, strainers, and other hardware with NPT pipe threads. Marine UL-listed.
Part No: 65-907-50
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Line Clips
Molded polyethylene clips suspend fenders, power cords, etc. from lifelines.
Part No: 1096
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
Part No: 4495
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
**Terminal|**Terminal.
Part No: EC04270-100
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 642
|
|
|
|
Home -> Cordage -> Rigging Products->Plastic Rigging Tape
Useful for color-coding halyards, shackles, etc. Stretchy, thin vinyl. Multi-Pak contains one roll each of red, green and blue.
Part No: 50503
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Zinc Plated Square Bend U Bolt Sets
Zinc-plated steel U-bolts with lock nuts and washers attach brackets to trailer frame. Available in four sizes: 2 1/8"W x 4"L. 3 1/8"W x 3"L. 3 1/8"W x 4"L. 4 1/8"W x 3"L.
Part No: 15254A
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
9" spark plug wire for Johnson/Evinrude (OMC).
Part No: 18-5231-1
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Zinc Plated Square Bend U Bolt Sets
Zinc-plated steel U-bolts with lock nuts and washers attach brackets to trailer frame. Available in four sizes: 2 1/8"W x 4"L. 3 1/8"W x 3"L. 3 1/8"W x 4"L. 4 1/8"W x 3"L.
Part No: 15252A
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Separating Kit with Fuel Filter
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
Part No: 802893Q01
|
|
|