Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
AmSteel-Blue is a 12-strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema® SK-75 fiber. This rope yields the maximum in strength-to-weight ratio and is stronger than wire rope constructions—yet it floats. Superior flex, fatigue and wear resistance. Stronger than AmSteel. Much stronger than steel. Very low stretch. Easily spliced. Superior flex.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
Hullgard Primer Converter, Qt. from AWLGRIP
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
|
|
Black from PETTIT, Blue from PETTIT, 102"Beam from TAYLOR, Gal from AWLGRIP
|
|
Home -> Plumbing -> Marine Sanitation
The finest holding tank monitor available with easy-to-read tank level indicators. Monitors up to four tanks from one convenient location. All parts are mounted outside of the tanks eliminates need for special tank fittings. Reliable electronic design protected for the marine environment. . Can be used with any polyethylene or fiberglass fresh, gray and waste water tanks. No maintenance required. Gold-plated connectors ensure consistent and trouble free performance. Low power consumption.
Part No: 1510012
|
|
|
|
Home -> Electrical -> Meters & Distribution->Digital Electrical Meter Series
Digital electrical meters feature an innovative shape that makes them easy to switch out and install. Large, bright LED display features waterproof front with easy pushbutton controls. Front mounts in a standard 2" round hole. Rear mounts in any full size electrical panel meter cut out. Uses easy spin-on mounting system. View Diagram Display Type: Digital LED . Digit Size: 9/16"H (14. 29mm) . Meter Case Glass: Reinforced Nylon . Dimensions: 2. 43"H x 2.
Part No: 8248
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Telescoping Undermount Ladders
Stainless steel . 12" wide.
Part No: L-3-12-D-UMB-L
|
|
|
|
These covers are designed to fit over bow rails, medium to high walk-through or one-piece windshields and other low-profile accessories. Outboard model covers come complete with a bound-in-motor hood. Covers are patterned to ft most V-hull runabouts with open or closed bows.
Part No: 70220
|
|
|
|
Home -> Interior, Flags & Gifts -> Clocks, Barometers, & Lamps -> Brass Lamps, Lighting
A smaller version of the Trawler lamp, the Trawler Jr. uses a circular wick to provide an extremely bright circle of light, even in large cabins aboard. Hanging bail and built-in smoke bell. Polished brass with a lacquer finish. White enamel shade underside for best light reflection. 10. 1 oz. oil or kerosene reservoir burns 30 hours. Round wick burner.
Part No: 8211/O
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Extreme™ Series Smart Sensor Water Pumps
Designed specifically for cruisers, midsize and larger yachts, these pumps incorporate a special sensor that precisely monitors your system’s water pressure and adjusts the motor’s speed, eliminating the need for a pressure switch and accumulator tank. The four/five chamber design and large inlet and outlet passages maximize water flow, and provide “just like home” showers and pump operation offshore or at the dock. ” Run dry without damage. Material: Glass-reinforced nylon body and baseplate .
Part No: 5901-1211
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Urethane, (Commercial/Industrial Only)
Marine Urethane - Commercial/Industrial Only Marine Urethane is a two component (3:1 mix ratio) marine grade acrylic polyurethane finish. High gloss and excellent color retention. Fast drying and good leveling characteristics. Very good resistance to chemicals, cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 4004-4GB
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awlcraft 2000 (Professional Application Only)
This two-component, fast-drying urethane coating provides a long-lasting, buffable finish with excellent gloss and color retention. Do not use below the waterline.
Part No: F8063/1GLUS
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Mainsail Covers
Even the toughest mainsail goes to pieces if left exposed to damaging UV radiation. Protect it with our top-quality marine acrylic canvas covers. A clever extendable panel, attached to the cover with hook-and-loop tape, lets you to extend the length up to 2' to cover the end of your boom. We’ve sized the girth measurement generously, so the cover will fit stiff, new sails, and those that weren't flaked properly. Lined to protect against most winch chafe. Brass twist fasteners.
Part No: H287490
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Vivid Eco Antifouling Paint
The active ingredient, ECONEA™ provides antifouling protection at low usage levels and because it is not a metal, will not cause galvanic corrosion on aluminum hulls. An added advantage is that this ECONEA-based paint will add less weight to boats when applied at the same film thickness as copper-based paint. Gallon size. *Estimated availability: Late spring, 2009. Currently not for sale in California and in States where prohibited by law. U. EPA FIFRA registration application submitted.
Part No: 1180606
|
|
|
|
|
These covers are designed to fit over bow rails, medium to high walk-through or one-piece windshields and other low-profile accessories. Outboard model covers come complete with a bound-in-motor hood. Covers are patterned to ft most V-hull runabouts with open or closed bows.
Part No: 71224
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Flexible Vinyl Rub Rail Replacement Kits with Inserts
Excellent universal rub rail fits many different boat models. Flexible vinyl rub rail is easy to bend and provides a soft cushioning effect against normal bumps from pilings and docks. It’s easy to install using basic tools and comes in a continuous coil for seamless application. Includes rub rail (in a continuous coil for one-piece installation without seams) insert, end caps, screws (matching for colored rub rail) and installation guide. Installation DVD included.
Part No: V11-0809BBK70-2
|
|
|
|
Covers are designed to fit V-hulls having extended forward deck areas and reduced cockpit space. Fit boats with low to medium profile bow rails and high windshields. Outboard models are made to cover a single outboard.
Part No: 72719
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
SeaStar PRO has steered the Bass Masters Classic® since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout.
Part No: HO5722
|
|
|
|
Home -> Engine Systems -> Engine Parts
Size F4B-9 pump is a replacement for Volvo engines: AQ110, AQ115, AQ115A, AQ1158, AQ120, AQ120B, AQ125A, AQ125B, AQ130, AQ130A, AQ130B, AQ130C, AQ130D, AQ140, AQ60F, AQ95, AQ95A, BB100, BB115, BB115B, BB115C, BB30, MB16A, MB18, MB18F, MB20, MB20A, MB20B, MB20C, MD17C, MD17D, and MD3B. Uses impeller model 09-1026B and service kit model 09-45905. May require two mounting clips (not included).
Part No: 10-35098-3
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Fabrics
Ideal for building composite laminates and fiberglass structures Fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abrasion-resistant covering for wooden structures. When wet-out, the 4 and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished. #740 4 oz. - 50" wide x 10 yard or 20 yard rolls. #742 6 oz. - 60" wide x 10 yard or 20 yard rolls. #745 12 oz.
Part No: 742-20
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1000C Catalyst Primer
Use with U-1000 Primer.
Part No: U-1000C GAL
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 202V Hi-Temp Silicone Exhaust & Water Hose
Ultimate quality silicone marine exhaust and water hose. Blue silicone offers tremendous resistance to heat and vibration. Exceeds all industry standards for performance. Sold in 3' sections. Application: Wet exhaust & higher pressure critical water service . Approvals: SAE J2006, ABYC, NMMA . Material: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350° F . Burst Strength: 15 psi working pressure . Maximum Continuous Length: 3' standard.
Part No: 16-202-8000-36
|
|
![Lt. Gray Plastic Base, 35"W x 29"H x 22"D, Injection Mold from B & M SEATING]( "Lt. Gray Plastic Base, 35\"W x 29\"H x 22\"D, Injection Mold from B & M SEATING")
|
|
Home -> Seating & Covers -> Seating->Short Pontoon Corner Seats
Remove seat cushion for under seat storage Rugged, rot-resistant, molded plastic frames Measures: 25"H x 30"W x 25"D NOTE: 8 WEEK LEAD TIME WHEN ORDERING.
Part No: 130W-21/02/13
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Vivid Eco Antifouling Paint
The active ingredient, ECONEA™ provides antifouling protection at low usage levels and because it is not a metal, will not cause galvanic corrosion on aluminum hulls. An added advantage is that this ECONEA-based paint will add less weight to boats when applied at the same film thickness as copper-based paint. Gallon size. *Estimated availability: Late spring, 2009. Currently not for sale in California and in States where prohibited by law. U. EPA FIFRA registration application submitted.
Part No: 1120606
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Coal Tar Expoxy Primer (Commercial/Industrial Only)
Two-pack epoxy coal tar polyamide primer. Meets the Corps of Engineers C-200 Specifications. Highly resistant to water, chemicals, abrasion and corrosion.
Part No: 8003-5GB
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac
Tandem Vertical Pod Manufactured from thermoformed uPVC Allows for 2–3 single instruments Instrument pod will swivel through 180° Pod arm will fit 1-1/8" and 1-1/4" diameter guardrail tubes All wiring of products mounted to the pod arm/instrument housing is hidden internally.
Part No: 89400355
|
|
![Short Pontoon Corner Seat - Lt. Gray/Navy/Blue from B & M SEATING]( "Short Pontoon Corner Seat - Lt. Gray/Navy/Blue from B & M SEATING")
|
|
Home -> Seating & Covers -> Seating->Short Pontoon Corner Seats
Remove seat cushion for under seat storage Rugged, rot-resistant, molded plastic frames Measures: 25"H x 30"W x 25"D NOTE: 8 WEEK LEAD TIME WHEN ORDERING.
Part No: 130W-21/08/03
|
|
|
|
|
.
Part No: 85320OG
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Fixed Extinguishers->Automatic Engine Shutdown Systems
Responds automatically, when a Fireboy system discharges, to shut down engines, blower systems and generators. Circuitry selection depends on system voltage (12V or 24V) and the number of items that would need to be shutdown, including engines, generators, blowers, etc. Required on all diesel engine applications, optional for all other engines.
Part No: ES-3000-01
|
|
|
|
|
.
Part No: 70719
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Transom Seals & Kits
Also includes other high-wear items like the gimbal bearings.
Part No: 18-8212
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purpose Pumps->Flo-Master Vane Pumps
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
Part No: SPO-60-N 24V
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Tilt/Trim Motors, Outboard Applications
Tilt/Trim Motors, Outboard Applications.
Part No: 18-6773
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->2.5 Heavy Duty Wiper Motor
Powers a 26" Deluxe arm and 26" Deluxe blade combination or a 24" Premier arm and 24" Premier blade combination. Fully sealed powdercoated aluminum waterproof base and housing. RF shielded circuitry. Factory pre-set sweep angles of 80° or 110° with easy adjustments of 45° or 60°. 12V electrical system. Two-speed motor. Style: Interior/Exterior. Sweep Direction: Both. Self-Parking: Yes. Case Material: Aluminum. Draw: No-load current 1.
Part No: 82082
|
|
|
