Welcome! Please Sign-In
Top Sellers
CARB GASKET KIT from SIERRA
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Yamaha Carb Kit from SIERRA
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Replaces OMC P/N 378444 from SIERRA
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Impeller, 18-3062 from SIERRA
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
For Chrysler/Force, 89-817109A2 from SIERRA
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Power Pack - Johnson/Evinrude -18-5758 from SIERRA
Power Pack - Johnson/Evinrude -18-5758 from SIERRA
Replacement part for Johnson/Evinrude Outboard #582453, 583380 OEM #0582452.
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
60GPH Cartridge, Replaces Racor S3227 from SIERRA
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
3/8 inch inline fuel filter from SIERRA
3/8 inch inline fuel filter from SIERRA
For use on McCulloch/Scott-Atwater, Suzuki Outboard and Yamaha Outboard 18-7831 is replacement for Johnson/Evinrude Outboard #398319.
Johnson/Evinrude, motor only, for 2-wire systems, 90–225hp (1991–1999) from SIERRA
F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.

from SEAFIT, from JOHNSON, Key from SIERRA, Switch from SIERRA

Powerhead Gasket - Mercury/Mariner from SIERRA Home -> Engine Systems -> Engine Parts
Replaces: 27-47257.
Part No: 18-2846
Thermostat Gasket (2) from SIERRA Home -> Engine Systems -> Engine Parts
2 per package.
Part No: 18-2843-9
Stainless-Steel Rectangle Loop, 3/16" Wire Dia., 1/2" x 1" Inside Dim. from SEAFIT Home -> Sailboat -> Rigging Products->Stainless-Steel Rectangle Loops
Use with eyestraps to attach webbing to surfaces, or sew to fabric as a webbing pass-thru. Heliarc welded.
Part No: C0139-R525-W
Heavy Duty Lug - 2/0 GA., 5/16" from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories->Heavy-Duty Lugs
Tin-plated finish and fully annealed. Made of high-grade electrolytic copper with a flared end for easy wire insertion and seamless construction. AWG identification. Style: Lug . Conductor Material: Tinned Copper . Wire Attachment Method: hand or auto crimp tool .
Part No: 252295
Anchor Rode Markers from WEST MARINE Home -> Cordage -> Anchor Line & Dock Line -> Anchor Line Accessories
Our high-visibility plastic markers let you know how much line you’ve paid out, so you can set the correct amount of scope.
Part No: 306
Sealring from SIERRA Home -> Engine Systems -> Engine Parts
**Seal Ring|**Seal Ring.
Part No: 18-2525
8"L Natural Nylon Cable Tie with Mounting Hole 25-Pack from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories->Multi-Pack Cable Ties with Mounting Hole
Cable Ties, with mounting hole (all require #10 screws except 228274 which requires #4 screw). . Pure virgin nylon 6/6 . Impervious to salt, chemical solvents, and acids.
Part No: 351148
Key from SIERRA Home -> Engine Systems -> Engine Parts
**Key-Impeller|**Key-Impeller.
Part No: 18-3302
C) Galvanized Stringer Angle from TIEDOWN ENGINEERING Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Dock Assembly System
We offer a complete line of rugged dock hardware for building a dock at your summer cabin or waterfront home. Designed primarily for noncommercial users, it’s sturdy enough for boat yards and smaller marinas. Once you have a plan and materials list, we’ll supply the hardware and your local lumber yard can provide the wood. For ideas on constructing your own dock, taek a look at detailed plans at http://www. tiedown. Several sizes of float drums are available, please search under Model 140264.
Part No: 26406
Portlight Chain - Brass from SEAFIT Home -> Cabinet & Deck Hardware -> Hatches & Ports
Highly polished brass toggle clasp with 8" chain.
Part No: 130010
Toggle Switch Boots, Pair, Black from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories -> Switches->Toggle Switches
All non-corroding construction with moisture-repellent insulators and silver contacts. MOM/M-On denote momentary. Lighted Toggle Swithces: White Off/Red On Chrome-Plated: Single Pole Switches, Off/On positions only Max 10A@12V Fit panels to 1/4" thick Mount in 15/32" dia.
Part No: 55383WM
Fish Grill Basket from FARBERWEAR Home -> Cabin & Galley -> Appliances & Cookware
Grill fish over barbecue or campfire!This basket makes barbecuing your catch-of-the-day neat and easy. It’s great for camping trips, too. Stainless steel basket. Wooden handle.
Part No: 79874-10
Mini Hack/Coping Saw from PRO-GRADE Home -> Paint & Maintenance -> Tools
Ideal for wood, soft metals, or plastic, this saw features sturdy I-beam construction with a 10 1/4" overall length and a 5 3/4" blade.
Part No: 31910
Poly Rod Holder, Single White from MARINE METAL PRODUCT Home -> Fishing -> Fishing Accessories -> Rod Holders->Tournament Rod Holders
These rod racks come in one and three-rod designs and feature a unique one-piece design that's easy to install. Corrosion-proof polypropylene construction. Three year warranty. Black or White.
Part No: 41030
Air Daddy II from KWIK TEK, INC. Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories
Get back to the fun faster with this universal adapter. Inflate your towables, swim toys, beach toys, inflatable boats, rafts, airbeds and sport balls with an air compressor at home or at the gas station. It's tapered to fit all valves on all inflatables, including all sizes of stern and Boston valves, Halkey-Roberts and Leafield valves. The screw on tip creates a high-pressure stream of air. Both the needle valve and the high-pressure tip stow securely in the handle.
Part No: AHAD-1
8"L Flat Head Cleat, 2-1/8"H, Requires Two 5/16" FHMS Fasteners from SEADOG Home -> Anchor & Docking -> Fenders & Docking->Galvanized Cleats
Beefy cleats for docks or work boats. Galvanized steel for corrosion resistance.
Part No: 040108
Heavy Duty Lug - 3/0 GA., 3/8", 2 pk from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories->Heavy-Duty Lugs
Tin-plated finish and fully annealed. Made of high-grade electrolytic copper with a flared end for easy wire insertion and seamless construction. AWG identification. Style: Lug . Conductor Material: Tinned Copper . Wire Attachment Method: hand or auto crimp tool .
Part No: 252716
Outrigger Ceramic Rings, 5/16", (8 ea.) from WEST MARINE Home -> Fishing -> Fishing Accessories->Hi-Performance "Bite This" Kite Accessories
The most comprehensive line of kite fishing products available to the sports-fishing enthusiast.
Part No: 88661
Hydro Catch Game and Ball from COOPSPORTS INTL Miraculous catches are a cinch!Colorful catching mitts with super sticky Velcro palms make catching easy! 7" mitt has an adjustable hand strap and a waterproof neoprene cover. Velcro-backed for super sticking power. Heavy-duty stitching. Includes two mitts and one tennis ball.
Part No: 55051
Shackle Key from WEST MARINE Home -> Sailboat -> Shackles, Snaps & Fittings -> Shackle Guards & Pulls
Open shackles, open bottles, and drive screws with a single stamped stainless steel tool.
Part No: M1800020
Knot-A-Bag Dispenser from DAVIS INSTRUMENTS Home -> Cabin & Galley -> Appliances & Cookware -> Galley Accessories->Knot-A-Bag
Make plastic bags of any length! Knot-a-Bag is the most convenient plastic bag anywhere! Unique dispenser holds 32. 5' (10 m) of tightly wound polyethylene film, yet fits in the palm of your hand. Knot-a-Bag is simple. Pull plastic bag material from center of dispenser, take the length you need, cut with built-in safety cutter, and tie a knot in the end. Absolutely waterproof when tied. Just pull it, cut it, knot it, bag it! Roll length 32. 5'. Bag circumference 24". Thickness 0.
Part No: 480
Anode-Teardrop L-Zinc| from SEA SHIELD Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Tear Drops
Tear Drops Anodes; all zinc anodes conform to Mil-A-18001, all aluminum anodes conform to Mil-A-24779. TD-S #10 size screw hole (1 3/8" - 1 3/4").
Part No: TD-L
Gate Stop, 1/4" Nominal Dia. (Wire), 3/8" Max. Coating Dia. from JOHNSON, C.S. Home -> Sailboat -> Rigging Products->Gate Stops
Normally installed over vinyl-coated lifelines.
Part No: 29-506
Switch from SIERRA Home -> Electrical -> Meters & Distribution
**Switch-Rocker|**Switch-Rocker.
Part No: RK19410
KitchenAid Shears, Black from KICHEN AIDE Home -> Cabin & Galley -> Appliances & Cookware
Heavy duty shears for a variety of uses with improved performance. Includes protective blade cover. Dishwasher safe. Stainless steel blades.
Part No: KAT351OB
Shock Cord Hooks (2), 5/16" Cord Dia. from SEAFIT Home -> Sailboat -> Rigging Products->Shock Cord Hooks
Using a slip ring to conceal the gripper, these hooks grip tenaciously and look machine-made, yet take only seconds to install! Made from rugged acetal resin.
Part No: PA141/2
Connect from SIERRA Home -> Engine Systems -> Fuel Tanks
**Tank Adapter|**Tank Adapter.
Part No: 18-4462
Air Sponge from DELTA Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Soaks up odors—helps your boat to smell fresh!This environmentally friendly tub of odor absorbent material absorbs pollutants and removes odors from the ambient air. Simply remove lid and place where needed. Ideal for enclosed spaces and during boat storage. 8oz. 8oz.
Part No: 200101-1
Compact Phantom Box from PLANO Home -> Fishing -> Tackle Boxes & Lures -> Hard Tackle Boxes
Thousands of uses! Compartments keep all items neatly separated. Made of chemical and worm-proof plastic. Houses up to 10 compartments. Fits in the bases of most tackle boxes.
Part No: 3510-01
Die Cast Bow Sockets, Side Mount from TAYLOR Home -> Seating & Covers -> Covers & Biminis
Die-cast, chrome-plated sockets.
Part No: 935
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12