Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
|
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
Connector from SIERRA, Gasket from SIERRA, Connect from SIERRA
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
950
960
970
980
990
1,000
1,010
1,020
1,030
1,034
1,035
1,036
1,037
1,038
1,039
1,040
1,041
1,042
1,043
1,044
1,045
1,046
1,047
1,048
1,049
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,200
1,260
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel QuickDisconnect|**Conn-Fuel QuickDisconnect.
Part No: EC04160-100
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Exhst Mnfld|**Gasket-Exhst Mnfld.
Part No: 18-0401
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpieces
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 901010
|
|
|
|
Home -> Engine Systems -> Engine Parts
Fits MerCruiser cylinder blocks and exhaust manifolds.
Part No: 16951Q1
|
|
|
|
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
Part No: 159508
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters
Replaces: 35-853333T Fits:V115 DFI (2. 5L) (2000), V-135 DFI (2. 5L) (1998 & Up), V-150 DFI (2. 5L) (1998 & Up), V-175 DFI (2.
Part No: 18-7997
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Hanger-Wetsuit 'Super'
Allows proper drying of wetsuits, dive gloves, fins, BC and regulator.
Part No: 24023
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Transfer Port|**Gasket-Transfer Port.
Part No: 18-0946
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring (5)|**O-Ring (5).
Part No: 18-7171-9
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Washer-Thrust|**Washer-Thrust.
Part No: 18-1191
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Stick-On Tape Reflectors
Stick-on tape reflectors are great for application on curved or flat surfaces or anywhere you'd like to increase nighttime visibility and they can't be cracked or broken. Bright prismatic appearance exceeds DOT requirements for reflector performance. Super-sticky adhesive so they won't peel off in harsh conditions. Kits include two Amber and two Red reflectors.
Part No: 01-4114-81
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Seal-Oil|**Seal-Oil.
Part No: 18-0593
|
|
|
|
Carry-On Portable A/C 2-Speed Switch.
Part No: 1014
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300090
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 643
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel QuickDisconnect|**Conn-Fuel QuickDisconnect.
Part No: EC04050-100
|
|
|
|
Home -> Engine Systems -> Engine Parts->Fuel and Carburetor Filters
In-Line outboard filters with plastic bowls fit 1/4" or 5/16" fuel lines. Carburetor filters fit Rochester 2- and 4-barrel or MerCarb 2-barrel (Model 1661800) or Rochester 2-barrel w/Carter fuel pump (Model 1661727). Fuel Type: Gasoline . Flow Rate: n/a . Filtering Fidelity: n/a . Mounting Head: n/a . Inlets/Outlets: 1/4" . Element Dimensions: n/a . Bowl Material: Plastic . Drain Fitting: n/a .
Part No: 803897Q1
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Waterproof lighting system is designed for over 80" wide trailers. Lights feature gasketed lenses that provide a "bell-jar" pocket inside the light to help keep water away from bulbs and contacts. High-impact acrylic lens and rugged duramold housing. The left light includes a license plate illuminator. Lighting kit includes two tail lights, trailer harness, licenses bracket, installation kit and instructions.
Part No: 01-9112-71
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Timing Cover|**Gasket-Timing Cover.
Part No: 18-0980
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring (5)|**O-Ring (5).
Part No: 18-7138-9
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002415-10
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Lock Washers, Type 18-8 Stainless Steel - Bulk Packs
Type 18-8 Stainless Steel - Bulk Pack lock washers, in packs of 10, 25, 50 or 100.
Part No: 1423A
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
**Connector|**Connector.
Part No: EC04110-100
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
**Terminal|**Terminal.
Part No: EC04090-100
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002401-1008
|
|
|
|
The proprietary formulation of EVA outer jacketing is the toughest in the industry. Snap-lock terminals with B-style wire crimps provide the strongest terminal retention values in the industry. Only original equipment style silicone spark plug boots, distributor nipples, and wire lengths are used to manufacture PowerPath wire sets. PowerPath's high energy fiberglass core delivers maximum voltage to the spark plugs without the electronic interference that can distort instrument readings. Mfr.
Part No: 700701
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Slotted Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 1137
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3567B
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Fine Thread - Phillips Machine Screws - Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 383A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Slotted Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 952B
|
|
|