Top Sellers
Vent, Chrome Plated Brass, Thru Hull, 90 degree Elbow from MOELLER
90° Elbow Chrome Plated Brass Thru Hull Vent Accommodates 5/8" I. D.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
Marelon Intake Scoop Strainer, 1-1/4" Max. Thru-Hull Si from FORESPAR
Made of durable composite material and engineered to exceed ABYC and ISO standards.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
|
from FACNOR, 2" Lock Nut for Thru-Hull from CONBRACO, Lube from SIERRA
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
960
970
980
990
1,000
1,010
1,020
1,030
1,040
1,045
1,046
1,047
1,048
1,049
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,200
1,260
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-25M-A
|
|
|
|
Home -> Sailboat -> Blocks->Series 30 Orbit Blocks™
Their flexible lashing and Dyneema® Link technology mirrors the latest trends in development classes and grand prix ocean racing. The product of meticulous engineering, they deliver the ultimate in strength, weight savings and control. Months of on-water testing by elite sailors pushed the product to their limits. Halyard, vang and backstay applications on boats to 16ft . Control line applications on larger boats . Materials: Sheave: High-compression–strength carbon black Acetal .
Part No: RF1850S-2
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
**Lube-Gear Hi Perf Qt (1008)|**Lube-Gear Hi Perf Qt (1008).
Part No: 18-9650-2P
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: RAY200
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->Offshore Elite™ Plus Life Raft with Watermaker and GPS EPIRB
The Ultimate Lightweight Liferaft! Looking for the best offshore liferaft available today? Look no further. The Offshore Elite Plus includes two large, independent buoyancy chambers each over 11" round as well as an automatically inflated canopy. Offering a spacious 4 square feet per person, the Offshore Elite Plus also includes a boarding ramp as opposed to a ladder making it much easier to enter the raft in rough sea conditions. Double, independent tubes over 11 inches in diameter .
Part No: 45-OEPLUS8C
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056560
|
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
**Oil-2 Cycle Qt (Pallet)|**Oil-2 Cycle Qt (Pallet).
Part No: 18-9500-2P
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->LS & LX Series Furlers
A drum bearing box with a steel thrust bearing between two large, self-lubricating polymer fiber bearings means that this furler has a smooth rotation under high axial (halyard) and lateral (sheet and furling line) loads. The head swivel, with the same bearing system as the drum, rotates smoothly, even under high loads. A halyard deflector wheel prevents troublesome halyard wraps. LS systems feature a non-removable drum, aluminum sail feeder and a fixed tack fitting. Ball Bearings: Torlon® .
Part No: 10923245600
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Code Zero Furling
Suitable for boats up to 125 (38 m), they tame Code Zero sails, screechers, Gennakers® and staysails. The 3126, 3127, 3128 and 3115 Code Zero’s spring-loaded arms hold line captive in the sheave. Arms open to remove the line for quick unfurling, or to strike the furler. A built-in stripper safely guides line out of the furler. The lower unit incorporates a quick sail disconnect by pushing a spring-loaded button. Compact hardened steel roller thrust bearings handle extremely high luff loads.
Part No: 3128
|
|
|
|
Home -> Seating & Covers -> Seating
This Small 130 Fighting Chair combines elegance, brute strength and superior engineering. Contoured, multi-position ladder back and footrest are removable and adjust to fit any angler. 4"dia. stainless-steel flush-mount pedestal comes complete with non-corrosive Delrin bearing. Each chair includes two side gimbals and a multi-position, flipup gimbal. This small, compact version is ideal for smaller boats that still ply big-fish waters. Overall: 45. 5"H x 67"L 5161781.
Part No: INT9775TOUR
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Flag Accessories->Spring Release Flag Clips
Spring Release Flag Clips Quickly attach flags and windsocks to lines, halyards, antennas, poles—even stern light poles.
Part No: 1500
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives
Controls flow of caulk for professional resultsSkeleton gun precisely controls caulking compound flow, allowing for no-drip operation.
Part No: CG-00118
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Dishes & Utensils->Galleyware Anchorline Dinnerware
Non-skid bottoms keep this dinnerware from sliding off your table—even in rough seas!Open-stock melamine dinnerware in delightful, decorative patterns and solid colors. Plates feature nonskid ring feet.
Part No: 1105
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> All Purpose Cleaners->Simple Green Marine
Here's a dependable cleaner/degreaser for your boatEasy to use just spray and wipe for spot cleanups. Cleans grease, oil, dirt and stains. Safe for fiberglass, painted surfaces and vinyl. 20oz.
Part No: 19520
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
.
Part No: 529200
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Seal-Exhaust Leg Rubber|**Seal-Exhaust Leg Rubber.
Part No: 18-0539
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Seal Ring|**Seal Ring.
Part No: 18-2528
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Spare Bronze Flanged Lock Nuts for Thru-Hulls
Designed and built with large surface to distribute load, for longer service life and more reliable connections. Plain bronze finish.
Part No: 65-007-65
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Cotter Pin (Priced Per Pkg o|**Cotter Pin (10).
Part No: 18-3747-9
|
|
|
|
Home -> Sailboat -> Winches->Spare Winch Parts
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
Part No: 45000109
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Water System Fittings
.
Part No: WX1522
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
12-oz. cans (except Item 398283 which is a 0. 6 oz.
Part No: 802878Q50
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Halkey-Roberts Valve for West Marine All Inflatable Boats.
Part No: SSL240400
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets->Heavy-Duty Scrub Brushes
These hand-held brushes clean where regular deck brushes don't Durable plastic head and handles stand up to tough cleaning chemicals. The Short Handle Scrub Brush has a 9 1/2"L handle that lets you get to areas that can’t be reached by a hand scrubber and the Bait Tank Scrub Brush has an extra-long, 21" handle for hard-to-reach areas. Short handled brush for scrubbing around bow rollers and stantion posts.
Part No: 193862
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Shackles
Get quality and excellent value with these precision cast and highly polished 316 stainless steel shackles. Imported. Mfr.
Part No: C0138-0005
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3059B
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->Scrub Brushes
No-nonsense scrub brushes clean fast, resist chemicals Our no-nonsense scrub brushes feature comfortable non-slip grips and stiff, chemical-resistant bristles. 14 1/2" Long-Handle version extends your reach for scrubbing baitwells, waterlines, bilges, etc.
Part No: 8563728
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Mercury/Mercruiser Bravo Ram Anodes
Mercury/Mercruiser Bravo Ram Anode available in zinc or aluminum.
Part No: 806190
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106473
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
Pack of 2.
Part No: 18-2939
|
|
|
