Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Exhaust Tube, Mercruiser from SIERRA
Replacement for Mercruiser Inboard/Outboard #32-90949T .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
|
Fuel Filter Cartridge from SIERRA
FILTER Replaces: Mercruiser 35-866171A01 Fits: 350 Mag MPI Alpha/Bravo, 350 Mag MPI Horizon Alpha/Bravo, 350 Mag MPI Horizon MIE, 350 Mag MPI MIE, 496 MAG, 496 MAG H. O. , 5. 0 MPI Alpha/Bravo, 8. 1L Inboard, 8. 1L Inboard H. O. , MX 6.
|
|
|
|
Plastic, Gasket from SIERRA, Mercruiser from SIERRA
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
970
980
990
1,000
1,010
1,020
1,030
1,040
1,050
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,200
1,260
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Float Chamber|**Gasket-Float Chamber.
Part No: 18-0840-1
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Universal Stirrers
Quickly mix enamels or antifouling paintsMixer is standard for topside enamels. Heavy-duty spinner is for bottom paints. For use with 3/8" or larger drills.
Part No: PT-03518
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces 26-816575A2 For ALPHA I GENERATION II.
Part No: 18-2599
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Shim|**Shim.
Part No: 18-2282
|
|
|
|
|**6 Chafe Protection 5/16 In.
Part No: CH51606
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring (5)|**O-Ring (5).
Part No: 18-7170-9
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Fairleads for Fast-Entry Cam Cleats
Nylon fairleads for fast-entry cam cleats.
Part No: 77-18
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
1 each Fits Nissan, Yamaha, Honda, Tohatsu For use with Sierra quart pumps or lower unit fill tubes.
Part No: 18-9794
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Bearing Life Bearing Protectors
Permanent protection against water and dirt. A spring holds the axle grease under pressure, preventing temperature changes from creating a vacuum in the bearings and pulling in contaminants and water. Install in place of Dust Caps. Available in four sizes. Sizes for bearings under 2" include covers, above 2" do not. Covers available separately, including for 2. 328" bearing size.
Part No: BB24410112
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 771A
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Cable Clamps
.
Part No: 401622
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Cable Clamps
.
Part No: 402752
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring (5)|**O-Ring (5).
Part No: 18-7411-9
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
Replaces: 22-806926A1.
Part No: 18-4224D
|
|
|
|
Home -> Engine Systems -> Engine Parts
Rochester Carburetor Fuel Filter Fits Rochester 2bbl & 4bbl.
Part No: 8767Q
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Sealed Sidemarker/Clearance Lights
Polycarbonate lens and housing are sonically welded for stability. This light is often used in the fender marker light location. Fully submersible. Models 6861488 and 6861371 include a self grounding chrome bracket. 2-1/2"W x 1-1/4"H x 7/8"D.
Part No: 01-4641-82
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
null.
Part No: 907014
|
|
|
|
Home -> Engine Systems -> Engine Parts
5 per package.
Part No: 18-7475-9
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Metric Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3840B
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Pump-Fuel Kit|**Pump-Fuel Kit.
Part No: 18-7787
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Line Clips
Molded polyethylene clips suspend fenders, power cords, etc. from lifelines.
Part No: 1093
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Submersible Under 80"W Trailer Lights
Gasketed lenses help keep water away from the bulbs and contacts of these lights, which are designed for under 80" wide trailers. The left light includes a license plate illuminator. Kits are available with and without sidemarker lamps. High-impact acrylic lens and rugged duramold housing. Lighting kits include two tail lights, trailer harness, license bracket, installation kit and instructions.
Part No: 01-9279-81
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0580
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Sealed Sidemarker/Clearance Lights
Polycarbonate lens and housing are sonically welded for stability. This light is often used in the fender marker light location. Fully submersible. Models 6861488 and 6861371 include a self grounding chrome bracket. 2-1/2"W x 1-1/4"H x 7/8"D.
Part No: 01-4641-81
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Cleans electrical contacts for a good connectionCleans electrical contact and leaves no oily residue. Easy spray application. 11oz. 11oz.
Part No: 06102
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Pump Port Adapters
.
Part No: 30653-1000
|
|
|
|
Home -> Cabin & Galley -> Dri Deck & Non-Skid->Dri-Dek
No more puddles. Dri-Dek is an instant dry and safe, non-slip surface that fits anywhere you need it! Self-draining, interlocking panels provide a ventilated surface that helps keep stowed gear dry and free from mildew and odor. Made from oxy-B1 vinyl, they inhibit bacterial growth by limiting germs’ ability to absorb oxygen. Use it under anchors, gas tanks or loose equipment to protect wood and fiberglass from abrasion. For a more finished, tapered edge, use 2" x 12" Edging Strips.
Part No: 03DPAD
|
|
|
|
Home -> Cordage -> Rigging Products->Copper Stop Sleeves
Circular sleeves are used for halyard stops.
Part No: K0754-0005-W
|
|
|
|
Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: RK 11341
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring
Turn on your vehicle's turn signals, lights or brakes and when power is present the corresponding circuit's green light will illuminate.
Part No: 50080310
|
|
|