Top Sellers
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
|
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
from HARKEN, 92"Beam from TAYLOR, 5"H from MOELLER
|
|
Home -> Sailboat -> Rigging Products->Stainless Do-It-Yourself Lifeline Kits
Innovative lifeline kits feature Quick Attach™ compression fittings that make rigging lifelines yourself easier, with no need to peel wires apart. Fittings are precision machined from 316 stainless steel and are certified with a break strength greater than the wire itself. Each Kit includes 40' of 3/16" wire (choose PVC coated (5/16"), or uncoated) and two turnbuckles with toggle.
Part No: C0747-LK01
|
|
|
|
Home -> Engine Systems -> Steering Systems
Replacement Seastar Helm Tilt Mechanism.
Part No: HA6523
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Controls ON-OFF and light rotation speed. Provides optimum voltage for brightest performance. Can perform up to six different duties; controls searchlights, winches, and other devices. 12/24V, for RCL-50/100 Series. Includes 8-ea. in-line connectors, but no coaxial cable. 2. 8" x 3. 0" x 1. 6". Application: XRCiZ rotates and moves light assembly every 30 days, keeping bearing surfaces free of corrosion .
Part No: 1927.3
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 80 - Pure Epoxy, (Commercial/Industrial Only)
Marine AC 80 - Pure Epoxy - Commercial/Industrial Only A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. High solids epoxy. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 8009-5GB
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 80 - Pure Epoxy, (Commercial/Industrial Only)
Marine AC 80 - Pure Epoxy - Commercial/Industrial Only A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. High solids epoxy. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 8012-5GB
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Flip-Flop Seat
Add flexibility to your pontoon seating with this two-position flip-flop-back seat with storage. The helmsman can use it while driving the boat. When docked or anchored, simply reverse the back so the skipper can join the crew. 100% plastic frames. Molded plastic base. Fully enclosed storage . Assembly required .
Part No: BM125-221
|
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Flip-Flop Seat
Add flexibility to your pontoon seating with this two-position flip-flop-back seat with storage. The helmsman can use it while driving the boat. When docked or anchored, simply reverse the back so the skipper can join the crew. 100% plastic frames. Molded plastic base. Fully enclosed storage . Assembly required .
Part No: BM125-207/215/
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 80 - Pure Epoxy, (Commercial/Industrial Only)
Marine AC 80 - Pure Epoxy - Commercial/Industrial Only A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. High solids epoxy. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 8001-5GB
|
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Flip-Flop Seat
Add flexibility to your pontoon seating with this two-position flip-flop-back seat with storage. The helmsman can use it while driving the boat. When docked or anchored, simply reverse the back so the skipper can join the crew. 100% plastic frames. Molded plastic base. Fully enclosed storage . Assembly required .
Part No: BM125-204/208/
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: P015
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70906
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->120V AC A-Series Main + Branch Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8043
|
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Flip-Flop Seat
Add flexibility to your pontoon seating with this two-position flip-flop-back seat with storage. The helmsman can use it while driving the boat. When docked or anchored, simply reverse the back so the skipper can join the crew. 100% plastic frames. Molded plastic base. Fully enclosed storage . Assembly required .
Part No: BM125-207
|
|
|
|
Home -> Fishing -> Fishing Accessories
Brawny downrigger controls 200 feet of cable, struggle-free The Strongarm features a brawny 30” boom that’s crafted in heavy-wall 1 1/4”dia. With an automatic disk brake and positive locking slip clutch control, the large-capacity horizontal spool offers safe, struggle-free control of 200’ of stainless cable. The Strongarm also includes a deluxe line release, tilt-up base and extension leverage handle. Excellent for the intermediate size boat. Lead weight sold separately . of premium 150 lb.
Part No: 1085DPR
|
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Flip-Flop Seat
Add flexibility to your pontoon seating with this two-position flip-flop-back seat with storage. The helmsman can use it while driving the boat. When docked or anchored, simply reverse the back so the skipper can join the crew. 100% plastic frames. Molded plastic base. Fully enclosed storage . Assembly required .
Part No: BM125-204/202/
|
|
|
|
Home -> Cordage -> Rigging Products -> Rigging, Sewing, Splicing
Use to hand-swage lifeline fittings. Mfr. only guarantees safe installation with this tool and method.
Part No: 00-2-3LL
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 32640
|
|
|
|
Home -> Electronics -> Boat Instruments->Traditional Series SailPod Systems
The 9. 5"W and 12"W are two of NavPod's most popular sail systems. Each features a 3 instrument NavPod, radar/chartplotter NavPod and a polished stainless steel two-bend 1. 25"dia.
Part No: AG126
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Alkyd 50, (Commercial/Industrial Only)
Marine Alkyd 50 - Commercial/Industrial Only Marine Alkyd 50 is a single component marine grade alkyd finish. High gloss and good color retention. Fast drying and good leveling characteristics. Good resistance to chemicals cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 3023-5G
|
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Flip-Flop Seat
Add flexibility to your pontoon seating with this two-position flip-flop-back seat with storage. The helmsman can use it while driving the boat. When docked or anchored, simply reverse the back so the skipper can join the crew. 100% plastic frames. Molded plastic base. Fully enclosed storage . Assembly required .
Part No: BM125-221/208/
|
|
|
|
Home -> Engine Systems -> Engine Parts
Sierra warrants its Thermostat Housing Kits and other engine parts to be free of defects in workmanship and materials for the life of the vessel on which they were originally installed.
Part No: 18-1989
|
|
|
|
Patterned to fit V-Hull offshore fishing boats with large open cockpits, center-steering consoles, high bow rails and short windscreens. Outboard models are made to cover a single outboard. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 85218
|
|
|
|
Home -> Sailboat -> Blocks->ESP Deck Organizers
Mount organizers with large fasteners directly through the sheaves. If you need an additional sheave, use the same holes and simply drill another hole to mount the longer organizer. Organizers are asymmetrical to keep them short, and may be double stacked to contain several lines in a small area. A spacer at one end keeps the outer line on the sheave. Sheave: Long-glass engineered plastic . Ball Bearings: Contained-axle sleeve bearing, carbon-black ball bearings . : 1/2" max. .
Part No: 6103
|
|
|
|
2-Year DOP Fr 4000 To 4999. 99|2-Year DOP Fr 4000 To 4999.
Part No: 1 DOP 4000-4999
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2689
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival
It is designed to protect the Fastfind PLB range from the harsh diving environment. Turned from a solid block of marine grade aluminium, anodised to 25 microns and pressure tested to 150mtrs (500ft), the canister is designed to be opened at the surface allowing quick and easy access. The double ring seal protects the threads providing watertight integrity to 15atm, preventing ingress of sand or other debris, and a convenient nylon clip is provided to attach the Canister.
Part No: 85-754A
|
|
|
|
Home -> Electronics -> Global Positioning Systems->Navionics Platinum
Plug-and-play cartridges are packed with data and ready for use! New Platinum charts, available in huge XL3 sized coverage areas come on pre-programmed 2GB cartridges—packed with data and ready to use. Just plug into a compatible plotter and you’ve got immediate access to all the fishing and navigation information found on your favorite paper charts. 3-dimensional views allow you to "flythrough" your route, showing depths, dimension and an optional photo overlay .
Part No: SD/904P
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Lag Screws - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2371B
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 3194
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3156.2.4M
|
|
|
