Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
|
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
Gasket from SIERRA, Bolt from SIERRA, Connect from SIERRA
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Engine Systems -> Engine Parts
**Seal-Shaft Water Pump|**Seal-Shaft Water Pump.
Part No: 18-3111
|
|
|
|
Home -> Sailboat -> Rigging Products->Super Shock Cords
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.
Part No: PC18 BLUE
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Stainless Steel Lock Washers
Stainless steel grade 18-8.
Part No: 31420MP
|
|
|
|
Water cover gasket, package of 2.
Part No: 18-2905-9
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Oval head
Type 18-8 stainless steel.
Part No: 0834MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Hex Nuts
Type 18-8 stainless steel.
Part No: 1310MP
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Mega Braid Nylon Line
Ideal for dock and anchor lines on large boats because its “single-braid” construction allows large diameter line to coil and flake easier than any other line. Extremely flexible when slack, it’s immune to kinking or hockling and the 12-strand construction makes Mega Braid a pleasure to handle. Treated with NER’s marine finish, which reduces shrinkage and water absorption and contributes to greater wet strength and abrasion resistance. Water and abrasion-repellent SeaGard® coating.
Part No: 1114-20-00600
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->Ship Grips
ShipGrips will instantly add a non-slip surface to just about anything on your boat. Simply peel and stick. The unique holding power of ShipGrips will keep your gear in place under extreme conditions. ShipGrips are: Waterproof: Grips great both wet or dry . Thin and flexible . Nearly invisible on most surfaces: Allows your object or boat color show through . Dishwasher- and microwave-safe. one sheet with assorted shapes and sizes. Pre-cut for easy application .
Part No: 40100450
|
|
|
|
Home -> Cordage -> Nylon Rope By The Foot->Double Braid Nylon Line
Versatile double braid line is 15% stronger than three-strand nylon and is ideal for docking and anchoring. With slightly less stretch than three-strand line, it still significantly reduces shock loads on equipment. Treated with an exclusive marine coating and manufactured with precise tension for strength, abrasion resistance and reduced shrinkage. Style: Double braid. Stretch: 6. 5% at 15% of breaking strength.
Part No: 2011-24-00600
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Double Braid Nylon Line
Versatile double braid line is 15% stronger than three-strand nylon and is ideal for docking and anchoring. With slightly less stretch than three-strand line, it still significantly reduces shock loads on equipment. Treated with an exclusive marine coating and manufactured with precise tension for strength, abrasion resistance and reduced shrinkage. Style: Double braid. Stretch: 6. 5% at 15% of breaking strength.
Part No: 2053-24-00300
|
|
|
|
Home -> Cordage -> Nylon Rope By The Foot->Double Braid Nylon Line
Versatile double braid line is 15% stronger than three-strand nylon and is ideal for docking and anchoring. With slightly less stretch than three-strand line, it still significantly reduces shock loads on equipment. Treated with an exclusive marine coating and manufactured with precise tension for strength, abrasion resistance and reduced shrinkage. Style: Double braid. Stretch: 6. 5% at 15% of breaking strength.
Part No: 2013-24-00600
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Double Braid Nylon Line
Versatile double braid line is 15% stronger than three-strand nylon and is ideal for docking and anchoring. With slightly less stretch than three-strand line, it still significantly reduces shock loads on equipment. Treated with an exclusive marine coating and manufactured with precise tension for strength, abrasion resistance and reduced shrinkage. Style: Double braid. Stretch: 6. 5% at 15% of breaking strength.
Part No: 2014-24-00600
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Double Braid Nylon Line
Versatile double braid line is 15% stronger than three-strand nylon and is ideal for docking and anchoring. With slightly less stretch than three-strand line, it still significantly reduces shock loads on equipment. Treated with an exclusive marine coating and manufactured with precise tension for strength, abrasion resistance and reduced shrinkage. Style: Double braid. Stretch: 6. 5% at 15% of breaking strength.
Part No: 2017-24-00600
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Double Braid Nylon Line
Versatile double braid line is 15% stronger than three-strand nylon and is ideal for docking and anchoring. With slightly less stretch than three-strand line, it still significantly reduces shock loads on equipment. Treated with an exclusive marine coating and manufactured with precise tension for strength, abrasion resistance and reduced shrinkage. Style: Double braid. Stretch: 6. 5% at 15% of breaking strength.
Part No: 2052-24-00300
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Racing Sheet Pro
Racing Sheet Pro is a double-braid with a blended SK75 Dyneema and Nylon fiber core and a 12-strand Dyneema and Taslan cover. It has lower elongation properties than standard Racing Sheet, maintains shape well in rope clutches, and can be used as a halyard as well as for mainsheets and jib sheets. Best Use: Main, jib and genoa sheets on dinghies and sportboats . Cover Fiber/Construction: Dyneema SK75/Taslan 50%-50% blend . Core Fiber/Construction: Dyneema SK75/Nylon 50%-50% blend .
Part No: RSP-10BLU
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Conn-Fuel QuickDisconnect|**Conn-Fuel QuickDisconnect.
Part No: EC04500
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Water Seal Damper|**Water Seal Damper.
Part No: 18-3176
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
Bypass cover gasket, package of 2.
Part No: 18-2876-9
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Grommets
Flexible nylon grommets prevent wires from abrading where they pass through bulkheads and panels.
Part No: 760500
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Retainer Screw|**Retainer Screw.
Part No: 18-2377
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Water Pump(2)|**Gasket-Water Pump(2).
Part No: 18-0415-9
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Racing Sheet
We prefer it over Salsa or the Maffioli products. We’re using Racing Sheet for our Ultimate 20 jibsheets, and as the mainsheet on our Byte dinghy. " Ideal for dinghies and used by multiple World and International champions. Wear-resistant plaited design is made of Dyneema SK-75 and impregnated nylon in a single braid construction. It’s extremely low-stretch, abrasion-resistant, resists kinking, is easy to handle and easy to splice. Best Use: Sheets for sportboat and dinghy classes .
Part No: RS-10GRY
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Tees, Barbed
Nylon Pipe Fittings.
Part No: 139960
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Bolt|**Bolt.
Part No: 18-3230
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Bolt|**Bolt.
Part No: 18-2602
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
**Gasket-Water Pump|**Gasket-Water Pump.
Part No: 18-0445
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Water Pump|**Gasket-Water Pump.
Part No: 18-0446
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Warpspeed Dyneema Double Braid
An excellent value for high-performance color-coded running riggingWarpspeed is designed, like all Samson competition-grade line, for high strength and low stretch. A 24-strand polyester cover surrounds a Samthane coated core of SK-75 Dyneema for excellent wear and resistance to the elements and consistent performance through continuous use in competition or regular use in windy waters. Best Use: High-performance color-coded running rigging, dinghies to maxis. 79% at 30% of breaking strength .
Part No: 444020505030
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpieces
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 901000
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Cover|**Gasket-Cover.
Part No: 18-0829
|
|
|