Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
|
|
Footman’s Loop, Fits 2" Webbing from SEAFIT
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
|
Stainless-Steel 12V Receptacle from SEAFIT
Built to last for years in the marine environment.
|
Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.
|
Medium Folding Grapnel Anchor from SEAFIT
Like mushroom anchors, this four-fluke anchor is a safe choice for inflatables - there are no open flukes to puncture fabric. It's easy to store and won't get tangled in other lines on your boat.
|
|
|
|
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
|
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
Bootstripe Tape, 2'' Black from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.
|
Spc Stripe Tape, 2'' Blue from SEAFIT
The easy way to add excitement to your boatAdd these stripes for a vibrant dose of color. A top carrier holds the stripes in alignment during application, ensuring flawless results.
|
Bootstripe Tape, 1'' Blue from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.
|
|
from SEAFIT, 40W from SEAFIT, 25W from SEAFIT, Gasket from SIERRA
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,230
1,240
1,250
1,260
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02022
|
|
|
|
Home -> Sailboat -> Rigging Products->Spare Turnbuckle Boot Caps
Spare Turnbuckle Boot Caps.
Part No: 248
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Shock Cord Hooks
Stainless steel with rubber coated tips.
Part No: C0908024
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Grommet|**Grommet.
Part No: 18-3329
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Water Passage|**Gasket-Water Passage.
Part No: 18-0953
|
|
|
|
Home -> Sailboat -> Rigging Products->Spare Turnbuckle Boot Caps
Spare Turnbuckle Boot Caps.
Part No: 246
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02044
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
.
Part No: 139909
|
|
|
|
|**Spreader Tubes, 1/4 In.
Part No: SP01404
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Shock Cord Hooks
Stainless steel with rubber coated tips.
Part No: C0906018
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 571
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02021
|
|
|
|
|**Spreader Tubes, 5/16 In.
Part No: SP51604
|
|
|
|
Home -> Cordage -> Rigging Products
Stainless steel with rubber coated tips.
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Internal Tooth Lock Washer
Type 410 stainless steel.
Part No: 1449
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: HSB56
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
BULB-FESTOON-T11X31-24V10W.
Part No: 840830
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
BULB-STD BASE-110V/25W.
Part No: 861302
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
BULB-FESTOON-T11X41-32V13W.
Part No: 840809
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
BULB-STD BASE-24V/40W.
Part No: 862440
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
BULB-STD BASE-12V/40W.
Part No: 860040
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
BULB-MINI-FLANGE-4. 8V.
Part No: 841130
|
|
|
|
Home -> Engine Systems -> Engine Parts->Oil-Tite Drain Plugs
.
Part No: 02814
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: PNP39B
|
|
|
|
Home -> Cordage -> Rigging Products->7 x 7 Vinyl-Covered Lifeline
Breaking strength is the same as base cable. First dimension given is wire size, second dimension is wire and covering.
Part No: SC0947701
|
|
|
|
Home -> Cordage -> Rigging Products->7 x 19 Flexible Wire
Marine Wire Rope The unique chemistry of this top-quality rigging cable has been developed and perfected for sailboat applications. Each strand is preformed and polished to eliminate wire’s tendency to collect carbon particles and become brittle. Exceptionally strong Loos wire rope is available in several different configurations and materials. 7 x 19 Flexible Wire Strong, medium flexibility cable commonly used for wire halyards. Seven strands of 19 wires each. Standard pack is a 250' spool.
Part No: SC09479
|
|
|
|
Home -> Cordage -> Rigging Products -> Shock Cord->Shock Cord Hooks
White nylon hooks with recessed knot openings.
Part No: PNP56
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Washer-Carrier Nut|**Washer-Carrier Nut.
Part No: 18-3712
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replace: 19232-ZV4-610 Fits: BF9.
Part No: 18-2495
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704050
|
|
|