Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
|
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
|
|
Camshaft from SIERRA, Lube from SIERRA, Range from GARMIN
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,250
1,260
|
|
|
Home -> Electronics -> Autopilots->SmartPilot X-5 Wheel Pilot
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
Part No: E12201
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Terrova Freshwater Trolling Motors
More power and strength to stand up to anything you encounter.
Part No: 1358861
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Stoves With Ovens->3-Burner Built-In Propane Ranges
Force 10’s unique, patented slide away oven door maximizes galley space. Highly corrosion-resistant 304 stainless steel is used for all structural components. Safety thermocouples at each burner stop the flow of propane seconds after the flame is extinguished. Standard infrared broilers produce great sandwiches and broiled fish. Each burner is designed to accommodate a 3/8” female flare swivel. Includes standard thermostatic control, standard clear window doors, stainless steel burner caps.
Part No: 73353
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling -> Air Conditioning->Cabin Mate Reverse-Cycle Air Conditioners
Add conditioned air and reverse-cycle heat to your boat with minimal installation requirements. Cabin Mate by Marine Air Systems with an exclusive stainless-steel drain pan includes a Tecumseh rotary compressor and a proven-reliable digital control as standard equipment. are needed. The controller allows you to cycle the fan with the compressor, vary fan speeds, calibrate the temperature and even control the humidity level on your boat while you’re away. Running current draw from 6. 8A to 12.
Part No: SCMCD7K
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->St. Croix Removable Davits
Quality, design and ease of use make Removable Davits the choice of discriminating boaters. Just pull the locking pin on each davit and slide it out of its shoe. Engineered for the marine environment, the 1" (25mm) 316 tubular stainless steel is mirror polished for a lasting finish. Rated 225 and 350lbs. per pair and designed to carry a 10 or 11' inflatable with up to a 15hp outboard (providing that the total weight of the boat, motor, gas tank and equipment does not exceed the 350lb.
Part No: 250
|
|
|
|
Home -> Electronics -> Boat Instruments->Micronet Maxi Displays
A wireless, solar-powered mast display for racing yachts, with high contrast, super-large digits, providing highly visible and accurate data in all conditions from anywhere on your boat. Customize the display to show only the data options you want to see, reducing the time it takes to select the pages you really need. Innovative “Auto Leg” function changes the display automatically to show the information you need for each leg of the course without the need to press a button. 88"W x 4.
Part No: T210
|
|
|
|
Home -> Sailboat -> Headsail Furling
Installation is easy: C-shaped open connectors with low-friction plastic isolators slip onto the headstay wire and into the foil without the need to cut your headstay. The foil's twin grooves and smooth feeder allow fast hoists, douses, and sail changes—ideal for club racing. The Harken toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye and the turnbuckle body is accessible for adjustment by raising the drum.
Part No: 7411.10 1/2
|
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Terrova Freshwater Trolling Motors
More power and strength to stand up to anything you encounter.
Part No: 1358812
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: SSRAY10
|
|
|
|
Home -> Fishing -> Trolling Motors->Riptide Bow-Mount Trolling Motors
A unique bearing system produces low rpms/high torque to cut down on fish-spooking noise – so they’ll never hear you coming. Patented AutoPilot utilizes a state-of-the-art compass system that locks on to a particular heading, and automatically and continuously makes adjustments to keep your boat moving in that direction. You can also now activate the AutoPilot models from anywhere on the boat. SP models feature a new deploy-assist lever that quickly and easily puts you in pursuit of the fish.
Part No: 1363710
|
|
|
|
Home -> Electronics -> Global Positioning Systems->A70 6.4" Chartplotter
The A70 GPS-Chartplotter is powerful navigation system that combines a direct sunlight viewable high resolution 6. The rugged waterproof construction make the A70 a perfect fit for center consoles and open cockpits. waters and the Great Lakes. Navionics Platinum charts feature 3D and satellite cartography, panoramic port photos, dynamic tides & currents, enhanced coastal points of interest, and more! The A70 comes with our innovative tilt and swivel bracket featuring a quick release lever.
Part No: E62190-RW
|
|
|
|
Home -> Electronics -> Radars -> Radar Antennas->GMR™ HD Digital Radar Scanners
These high-powered 4kW High Definition radomes have the power and range to bring radar images into crystal clear focus. They feature Digital Signal Processing for sharper radar imagery and improved target separation. Combine them with a multi-function display and an optional heading sensor for MARPA tracking.
Part No: 010-00572-02
|
|
|
|
Home -> Electronics -> Fishfinders -> Fishfinders->Color Twinscope Forward Looking Sonar
Working like underwater ultrasonic radar, the Color Twinscope scans a moving beam over a 90 degree arc either vertically, from the surface ahead to the bottom below—or horizontally, back and forth across the bow of the boat like a searchlight. All owners will appreciate the unique display cursor that instantly provides range and depth to selected forward objects, the ability to connect an optional camera to monitor engine rooms or other important areas and its straightforward, easy operation.
Part No: U1-TWIN-CLA
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->MerCruiser Alpha I & Gen II Upper Drive Units
Built with proven components, the gears in these units have passed a 300 hour extreme endurance test with flying colors. All units are pressure and vacuum tested and subjected to stringent quality control tests at every step of the manufacturing process. Note: All Gen II upper and lower units built to 1998 and up specifications.
Part No: 18-2453
|
|
|
|
Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables->WhaleRide Banana Sleds
Ride our wild orca sleds!Durable banana boats combine a unique killer whale design with tough, durable puncture resistant 1100 denier construction. Great for family recreational use year after year. Side by side configuration gives riders room to move and a wider, more stable ride in ocean or rough water use. Each sled is made with bonded, overlapping seams and is double reinforced in the high-stress, hard-used areas. Comes with: front tow bridle. rope toggle. valve. adaptor. repair kit .
Part No: pvc-6-WR-sbs
|
|
|
|
Home -> Seating & Covers -> Seating
This pontoon seating kit features two fold-down seats for a more traditional layout. Plush and comfortable seating for any pontoon boat. Lt. Gray/Navy/ Blue. The complete kit includes the following seats: Corner Armrests - Radius Left, Right (2) . 36" Lounge Seats (2) . 27" Lounge Seats (2) . Fold-Down Seats (2) (Pedestals sold separately. ) . Captain’s Stand Console . Bucket Seat (Pedestal sold separately.
Part No: WMX13008
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts->Extension Tethers for VideoRay Underwater Cameras
All VideoRay systems come standard with 250 feet of neutrally buoyant tether, and now you can choose from several combinations of neutrally buoyant or negatively buoyant tether lengths to suit the job at hand. The detachable tethers encourage easier transport and handling as they accommodate specific depths. Modular lengths of neutrally—and positively—buoyant tether can be mixed and matched by simply locking in new sections. Snap on the short tether for a potable water tank inspection.
Part No: THE-250
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering->SeaStar 1.7 Front-Mount Outboard Hydraulic Steering Kits
Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately.
Part No: HK6324A
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
16"dia. Molded, nonskid interior deck provides a safe and stable platform for passengers and gear. Application: Rigid Hull Sportboat/Performance Tender Fabric: 1100 decitex PVC-coated polyester Tube Diameter: 16" Number of Chambers: 2 Bottom Shape: V-shape Floor: Fiberglass Transom Construction: Marine plywood Seam Construction: Thermobonded Warranty: Five years †NOTE: PVC fabric is rugged, durable and dependable in conditions where there is not intense UV exposure.
Part No: Z24022
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
**Lube-Premium Gear 55 Ga|**Lube-Premium Gear 55 Ga.
Part No: 18-9600-7
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tecma® Silence & Silence Plus Heads
This elegant design features ultra-quiet operation and an efficient turbine pump that instantly macerates waste and pushes it into the holding tank. Convenience is better-than-home with solid-state, automatic flush and wall-mounted control for easy fingertip operation. Solenoid models (without pump) plumb directly to boat’s pressurized freshwater system. Models with pump draw seawater from outside the boat. Silence Plus features a larger seat and deeper bowl for added comfort.
Part No: 38355
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S60-7
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Gale Sail
The safest and easiest way to hoist a storm jib in heavy conditions. Simply furl the genoa sheets down to the deck and yank the Gale Sail over the furled headsail, attach its sheets and hoist it with a spare halyard or the spinnaker halyard. Eliminates the need for a removable headstay. No need to unfurl, lower and pack the genoa to hoist the storm jib. The Gale Sail is a heavy-duty storm jib that can be flown either by itself, or in combination with the reefed mainsail or trysail.
Part No: GS150
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Electro Scan Type I Marine Sanitation Device
The treated waste water then safely and conveniently reverts back to its original state of salt and water which meets EPA Type I standards for overboard discharge. Compared to its predecessor, Electro Scan consistently controls the electrodes to reduce power consumption, drawing 37 amps for two minutes (@12V DC) resulting in a mere 1. 3Ah per cycle! It features easy touch pad operation and may be installed with one or two heads to form a complete sanitation system. Includes hose barb fittings.
Part No: EST12
|
|
|
|
Home -> Electronics -> Global Positioning Systems->A70D 6.4" Chartplotter/Fishfinder
The A70D GPS-Chartplotter/Fishfinder is a powerful yet compact navigation system combined with our award winning HD Digital fishfinder technology. 4” VGA color display. The rugged waterproof construction make the A70D a perfect fit for center consoles and open cockpits. This A70D is preloaded with ready-to-navigate Navionics cartography for coastal U. S. Expand your chartplotters capability by adding optional Navionics Gold or HotMaps charts using the onboard CompactFlash card reader.
Part No: E62192-RW
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Camshaft Kit|**Camshaft Kit.
Part No: 18-1476
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Fixed Shank Scoop Anchors->Rocna Anchors
Independently tested as one of the best, Rocna anchors stand out for their holding power, setting ability and ease of use. They combine a chisel tip, roll-bar, and skids to dig in straight and bury rapidly, typically within one meter, even in thick weed and kelp. The Rocna’s folded fluke geometry resists wind and current shifts and doesn’t easily trip out upon load reversal. This means greater security for cruisers, and a lighter anchor for weight-sensitive craft. Style: Fixed-shank “scoop” .
Part No: ROCNA 40
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: SSP025
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Profurl Cruising and Racing Furling Systems
Made of high impact plastic, the drum can withstand tremendous impact and is resistant to UV and corrosion. By removing the drum, the headsail can be hoisted and set as if on a racing foil. The C290 Cruising model features the same drum, but is not removable. The foil shape is designed for uniform rigidity, aerodynamic performance and smooth even rotation. The stainless luff-rope feeder offers a smoother and easier sail hoist by one crew member and eliminates any possible damage to the sail.
Part No: R250
|
|
|
|
Home -> Anchor & Docking -> Anchors->Delta™ Fast-Set Anchors
Easy handling, self-launching design sets fast in any seabed One-piece anchor has very high holding power and structural strength. Balanced to fall unaided from bow rollers, so it’s ideal for use with remotely operated windlasses. Heavy ballast in the toe section ensures that the anchor will engage the seabed upon hitting bottom. Lifetime warranty against breakage. Style: Non-Hinged Plow. Material: Galvanized-manganese steel or stainless steel. Application: All bottoms .
Part No: 0057316
|
|
|
