Top Sellers
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Ignition Switch J/E W/Key from SIERRA
Johnson/Evinrude No. s 386545, 386496, 379047 and 378238. Stainless steel and Delrin construction. 5 terminals with special waterproofing seal and drain holes. Brass chrome plated face nut, back-up nut and washer. Silvered contacts, stainless steel terminals and springs, brass screws. Mounting bushing 1-1/2" long.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Ultima Electronic Bilge Switch from JOHNSON PUMPS
The same switch that comes preinstalled on Johnson Ultima Combo Automatic Bilge Pumps. With no moving parts and totally sealed solid state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/deactivates at 2" and 3/4" fluid levels. A three second delay prevents false starts. Rated to handle pumps up to 20 amps at 12V or 24V DC. Activation Method: Solid-state electronic . Dimensions: 2-3/8"H x 2-11/16"L x 1-1/8"D .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Vertical Plunger Galley Pump, White from FYNSPRAY
Affordable, quality plastic pump with European styling. Vertical plunger action, with a 4" spout. Material: Chrome. Capacity: 58 strokes/gal. Dimensions: 4"H. Cutout Size: 1 1/4". Clearance 9".
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
|
12V from BALMAR, Assembly from SIERRA, 2nd from LEWMAR, 1, 1"
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**GearSet-V6 Complete|**GearSet-V6 Complete.
Part No: 18-1551
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-312-6
|
|
|
|
Home -> Electronics -> Boat Instruments->Self Leveling MAST Mounts
New for 2009, this Self-Leveling mast and backstay mounting system guarantees your radar will stay level with the horizon as the boat heels or rolls. The carbon fiber or stainless steel radar cradle minimizes weight while the 316 stainless steel head unit ensures durability. The patented oil dampened leveling system provides precise function even in the most adverse weather conditions.
Part No: SLP-1
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Coolers & Ice Chests
These portable compressor refrigerator/freezers are suitable for normal refrigeration and deep-freeze cooling and they are energy efficient and offer quiet operation. Temperature ranges from +50° to 0°F via electronic thermostat with LED control display panel. Three-stage battery selectors switch prevents you from running your battery too low. Includes interior light, variable lid mounts, removable coated wire basket, grid organizer and detachable carrying handles. Requires 6A@12V DC. OD 24.
Part No: CF-050AC110
|
|
|
|
Home -> Engine Systems -> Engine Parts->AIRSEP® Diesel Engine Retrofit Kits
The Walker AIRSEP is the premiere closed crankcase system that incorporates three systems in one. The unit includes a washable high performance air filter, a crankcase fumes disposal feature, and an integrated air intake silencer, all in one compact package. No more noxious crankcase odors in your salon or living areas. The AIRSEP has been factory installed by major diesel engine manufacturers worldwide since 1989, and popular kits for Caterpillar, Cummins, and Detroit Diesel are listed here.
Part No: WKW3866425
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Starboard Poly-Sheets Building Material
.
Part No: P10-7596BLK54
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->120V A-Series Source Selection Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
Part No: 8475
|
|
|
|
Home -> Electrical -> Meters & Distribution->A-Series Toggle Main + Branch Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
Part No: 8379
|
|
|
|
Home -> Fishing -> Trolling Motors->Wireless Series Trolling Motors
The most pontoon-friendly trolling motor ever made, it has a small-footprint mount that is removable for locking, one-hand stow and deploy, and capability to use up to four handheld Digital Remote Control units or foot pedals (in any combination). Speed control: Digital Guardian variable speed control is completely epoxy-sealed and protected from heat, moisture, corrosion and shock, greatly improving durability. Improved efficiency results in extended battery life and more time on the water.
Part No: 970100050
|
|
|
|
Home -> Engine Systems -> Steering Systems->Heavy-Duty Helm Assemblies
These helms combine one or two bi-directional axial piston pumps with pilot check and make-up check valving. The result is a unit that prevents rudder feedback, is very efficient (even at low rpm) and is immediately adaptable to multi-station use.
Part No: H-21
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->AIRSEP® Diesel Engine Retrofit Kits
The Walker AIRSEP is the premiere closed crankcase system that incorporates three systems in one. The unit includes a washable high performance air filter, a crankcase fumes disposal feature, and an integrated air intake silencer, all in one compact package. No more noxious crankcase odors in your salon or living areas. The AIRSEP has been factory installed by major diesel engine manufacturers worldwide since 1989, and popular kits for Caterpillar, Cummins, and Detroit Diesel are listed here.
Part No: WKW3866450
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Starboard Poly-Sheets Building Material
ACRYLIC, SEAFOAM .
Part No: P10-7596SFM54
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- and Two-Speed Winches, Non-Self-Tailing
Racing sailors will appreciate the smooth operation and flawless performance developed through years of experience on the race course. A massive, all-bronze one-piece center stem supports stainless steel main shafts and gear spindles that lend exceptional strength. Bronze gear trains deliver smooth power; high-tensile bronze gears are machine cut to very high tolerances. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy.
Part No: 49040030
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Cylinder Head Assy|**Cylinder Head Assy.
Part No: 18-4496
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Heads->Quiet-Flush Electric Heads
The Quiet Flush head features a very quiet flush cycle just like your household toilet. Incorporates a powerful waste water evacuation pump with built-in macerator. Select normal flush or bowl-fill/bowl-empty flush. Water control solenoid valve with anti-siphon breaker to prevent contamination of potable water supply. Includes 6' hose for connecting to the remote mounted solenoid valve and a siphon-breaker assembly. Port Sizes: 3/4" Hose Barb intake, 1" Hose Barb discharge.
Part No: 37245-1092
|
|
|
|
Home -> Interior, Flags & Gifts -> Clocks, Barometers, & Lamps->Chelsea Shipstrike Series Instruments
Superior quality in fine brass instrumentation. Individually hand-assembled European movements ensure accuracy. Heavy, forged brass cases are seamless and flawless, with a lacquered finish for protection. Both clocks strike ship’s bells with a rich, melodious sound.
Part No: 40006
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Coolers & Ice Chests->Ultimate Coolers
Made from dent, chip and crack-resistant ABS plastic Contain special UV inhibitors for prolonged outdoor exposure Super-strong insulated lid can be used as a foot stool or seating Optional comfortable cushions Thickness: 1 1/2" insulation Big Cooler Dimensions: 19 1/2'' H x 22 3/4'' W x 48''L Huge Cooler Dimensions: 21'' H x 25'' W x 62 1/2''L.
Part No: 10320
|
|
|
|
The most powerful and feature-packed for the bow of your boat!These trolling motors feature ultra-responsive steering, a heavy duty mount that boasts superior strength and an indestructible composite shaft that flexes on impact so you can go right on fishing. These motors also feature the Bowguard 360° Breakaway Mount that breaks away on impact from any angle to protect motor, shaft and boat. 5 speed or variable speed depending on model. Steering Type: Tilt foot control or tilt control handle.
Part No: 1368562
|
|
|
|
Home -> Electronics -> Boat Instruments -> Wind Instruments->ST60+ Wind System
The ST60 Plus Wind System displays either true or apparent wind direction on a 360° analog display*. Highlighted close-hauled segments. 1 knot resolution. Maximum windspeed storage minimizes arguments about how hard it really blew. Display Type: LCD Digit Size: 1. 43" Speed Range: 0 to 60 knots/meters per sec. /Beaufort Speed Resolution: Tenths of Knots Functions: Apparent/true speed/direction, Beaufort scale, opposite tack heading Controls: Four sealed back-lighted buttons Dimensions: 4.
Part No: A22011-P
|
|
|
|
Home -> Electronics -> Fishfinders->HDS-5 Nautic Insight Fishfinders
They offer superior clarity and up to an astounding 120° view of fish- and structure-finding coverage. COLORLINE™ improves target definition and separation, plus defines bottom composition. New, multiple choices of color palettes let you decide how you want to mark fish depending on conditions. A new keyboard design offers even better control no matter what the situation. An integrated, super-sensitive, 16-channel internal GPS antenna offers faster time-to-signal lock and precision position.
Part No: 000-0140-19
|
|
|
|
|
3-Year DOP Fr 8000 To 8999. 99|3-Year DOP Fr 8000 To 8999.
Part No: 2 DOP 8000-8999
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Traveler Kits
These kits take the confusion out of installing a traveler. Includes components for the most popular Small Boat and Midrange traveler configurations. Kit contains a car, control blocks for the car, and control blocks for the track ends. Small Boat Traveler Kit: Includes 2743 double-cheek blocks, 348 single-fixed blocks on 2735 car with pivot toggle. Midrange Boat Traveler Kit: Includes 1627 car, two 1633 double0sheave end controls with Carbo-Cam cleats, two 342 double-swivel blocks.
Part No: 3175
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Wireless Series Trolling Motors
The most pontoon-friendly trolling motor ever made, it has a small-footprint mount that is removable for locking, one-hand stow and deploy, and capability to use up to four handheld Digital Remote Control units or foot pedals (in any combination). Speed control: Digital Guardian variable speed control is completely epoxy-sealed and protected from heat, moisture, corrosion and shock, greatly improving durability. Improved efficiency results in extended battery life and more time on the water.
Part No: 970100040
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6-Series Alternators
Balmar’s newest 6-Series alternators combine the best of traditional Balmar quality with technology that’s more universal and user-friendly than ever. Isolated Ground terminals are now standard, improving the system ground and noise reduction. 6-Series alternators utilize dual internal fans and an open frame case design for improved alternator cooling. A universal crown assures an easy fit on most modern engines. Model 621 alternators replace 1” single foot or 2" single foot alternators.
Part No: 604-120-SR-IG
|
|
|
|
Home -> Seating & Covers -> Seating->Neptune Premium Leaning Post
A perfect solution for fishing off your center console boat. Solid polished aluminum construction with 1400 cu. of storage under the white upholstered, padded seat, this leaning post has an easy reach aluminum grab rail to help you keep your footing and a folding footrest with recessed hinges so it's there when you need it and out of the way when you don't. A convenient cooler strap makes it possible to store a cooler underneath. Dimensions without backrest: 33"H x 22"L x 35"W.
Part No: L10-1003-1
|
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6-Series Alternators
Balmar’s newest 6-Series alternators combine the best of traditional Balmar quality with technology that’s more universal and user-friendly than ever. Isolated Ground terminals are now standard, improving the system ground and noise reduction. 6-Series alternators utilize dual internal fans and an open frame case design for improved alternator cooling. A universal crown assures an easy fit on most modern engines. Model 621 alternators replace 1” single foot or 2" single foot alternators.
Part No: 621-120-SR-IG
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Refrigeration Conversion->Coolmatic Cooling Kit
Kit turns an insulated space into a 12V refrigerator This compact do-it-yourself kit is ideal for easily converting an existing, passive insulated cooling area into a full, high performing compressor-powered refrigerator unit. AC Adapter offers problem-free connection to 110/240 volts AC power.
Part No: CS-NC-15
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Heavy-Duty Helm Assemblies
These helms combine one or two bi-directional axial piston pumps with pilot check and make-up check valving. The result is a unit that prevents rudder feedback, is very efficient (even at low rpm) and is immediately adaptable to multi-station use.
Part No: H-25
|
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6-Series Alternators
Balmar’s newest 6-Series alternators combine the best of traditional Balmar quality with technology that’s more universal and user-friendly than ever. Isolated Ground terminals are now standard, improving the system ground and noise reduction. 6-Series alternators utilize dual internal fans and an open frame case design for improved alternator cooling. A universal crown assures an easy fit on most modern engines. Model 621 alternators replace 1” single foot or 2" single foot alternators.
Part No: 60-120-SR-IG
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Ocean Series Hatches
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
Part No: 39660070
|
|
|
