Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Water Temperature Gauge, IB, SD from TELEFLEX
Light grey dial, black graduations and numerals, white pointer staff. Scratch-resistant curved glass lenses with black, near flush bezels. U. S. and metric scales with ISO symbols where appropriate.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
|
488 from SIERRA, Black from TELEFLEX, 125V) from MARINCO
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops
Taco Neptune T-Top Accessory Canvas Top.
Part No: T30-0001BLK-1
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 43 LED Navigation Lights
These new LED navigation lights are a direct replacement for Aqua Signal Series 40 & 41 direct mount lights. They feature a modern design and are an optimal size for sport boats and yachts up to 164' (50m). Each light contains two state-of-the-art LEDs with patented prism technology for increased brightness and additional safety. Rated at 50,000 hours run time. Dimensions: 4-1/8"H x 4"W x 2-1/2"D . Mounting Hardware: Not included . Volts: 12V or 24V. Draw: 0.
Part No: 43301-7
|
|
|
|
Home -> Electrical -> Meters & Distribution->AC Source Selection Rotary Switch Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8366
|
|
|
|
Home -> Seating & Covers -> Seating -> Chairs & Seats->Tempress Elite Helm Seats
Designed to withstand the rigors of the marine environment, this rotationally molded helm seat incorporates the patented Navistyle™ StylePanel™ for superior comfort and unequalled quality. With subtly curved lumbar supports, built-in armrests and a rolled front edge, the StylePanel™ system creates a comfortable seating surface that is ergonomically correct with just the right amount of cushioning.
Part No: 57027
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Lounge Seats
When you add comfortable seating to your pontoon or deck boat, you reap the benefits of a major upgrade with a relatively small investment and easy installation. Fully enclosed storage in seat. Heavy duty marine-grade vinyl . High-density Polyurethane foam. 100% plastic frame construction. Measures: 27".
Part No: BM95-207
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Radar Mast/Pole Mounts & Accessories
This application will fit most radomes and requires some assembly. Choose the top plate that fits your brand of antenna (each top accepts LTB option): Raymarine top plate (Model 5436290) Universal* top plate (Model 5436308) Garmin top plate (Model 6966022) . Choose secondary support: Two 48" stainless-steel struts with brackets and hardware (Model 5436324) One 48" stainless-steel strut and one rail stand-off for 1" rail and mounting hardware (Model 5436316).
Part No: RM3-AB
|
|
|
|
Home -> Engine Systems -> Engine Parts->Outboard Starters
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
Part No: 18-5630
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Outboard Starters
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
Part No: 18-5635
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->120V AC A-Series Main + Branch Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8027
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Two expandable trays hold 12 compartments of Ancor marine-grade electrical equipment and three essential toolsa much better value than buying items individually. Kit includes approximately 100 butt, spade, and ring connectors, 50–60 cable ties, clamps, various lengths of heat shrink tubing, spare bulbs and fuses in assorted sizes, two fuse holders, two battery lugs, #12 and #16 boat cable, 16/2 duplex wire, a wire cutter, wire stripper and wire crimper.
Part No: 220007
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Drop-forged and remarkably strong, these pad eyes handle high operating loads, yet fold down when not in use. Silicone pad prevents vibration. Stock Diameter: 1/4". Hole Spacing: 1-1/16". Length: 1-3/4". Opening: 9/16". Pin Diameter: 1/4". Maximum SWL: 4,400lb. Fasteners: 1/4". 1.
Part No: 56504
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 8-4S
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Quicksilver Black Diamond Modular Propellers
Black Diamond Modular Propellers A general-purpose aluminum prop that is inexpensive and easy to repair, recommended for speeds less than 50mph and for engine applications lower than 250hp.
Part No: QA3542R
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Gunwale-Mount Ladders
Handrails rise 5" above-deck to provide secure handholds. Allows you to “walk through” to the deck. The cushioned standoffs can be cut to fit hull contours. Bottom steps fold up for compact storage. Additional mounting brackets are available for multiple mounting locations. Mounting Style: Deck bracket mount . Material: 304 stainless steel . Maximum Capacity: 300lb. . Width: 13. 75"W (outside dimension) .
Part No: WML-3-3-12-DFRM
|
|
|
|
Designed for baitwell or fish box pumpout, this reliable pump features valves that won’t choke on fishy remnants at the end of the day. Capacity is more than ample at 6. 8 gallons per minute and it is self-priming to 10 feet. Installation is made easy by the pump’s ports which rotate 360°. Includes fittings to accommodate 1" or 1 1/2" hose. gpm: 6. Self-Prime: 10' . Material: Aluminum, glass-filled nylon, Santoprene® diaphragm. Dimensions: 6-3/4"W x 10-3/4"L .
Part No: BP4572
|
|
|
|
Home -> Engine Systems -> Control Systems->CH Series Premium Engine Controls
Form meets function with these mechanical engine controls. Designed with a contoured grip for ergonomic hand-fitting comfort, these controls also provide a universal fit to any current 3300-/OEM type control cable and adapt to any current engine harness for inboards, outboards and I/Os. Both the Ch1700 side-mount and the CH7500 top-mount with right hand lever feature push-button warm-up and single lever shift and throttle operation with trim in the handle.
Part No: CH1700-000000
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Powerful, compact stainless-steel docking lights have a mirror finish and 50W halogen lamps. Built to last in the wet marine environment . Watertight gaskets and UV-stabilized housing. Features 18" thermal wire leads. Heat-resistant and shatterproof pyrex lens . Lenses can be easily removed to replace bulbs when needed.
Part No: 580-0200-7
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-5966
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Quicksilver Black Diamond Modular Propellers
Black Diamond Modular Propellers A general-purpose aluminum prop that is inexpensive and easy to repair, recommended for speeds less than 50mph and for engine applications lower than 250hp.
Part No: QA3543R
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Manifolds, Elbows, Risers
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
Part No: 18-1975-1
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Ball and Socket Top Hardware Kits
One convenient package, all of the Ball & Socket deck hinges, top caps, and jaw slides needed for 4-bow canvas tops. Designed for universal use. Will fit existing side curtains, canvas, and tube. Easy operation and a tight fit. Delrin insert eliminates rattle.
Part No: F11-1104-1
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Ergonomically designed to make transporting fuel easy. The unique Gas Kart can be pulled the same way as a pull golf bag cart, with features including a molded-in handle, recessed polypropylene wheels, two brass shut-off valves, and 6' hose.
Part No: WP-1
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 43 LED Navigation Lights
These new LED navigation lights are a direct replacement for Aqua Signal Series 40 & 41 direct mount lights. They feature a modern design and are an optimal size for sport boats and yachts up to 164' (50m). Each light contains two state-of-the-art LEDs with patented prism technology for increased brightness and additional safety. Rated at 50,000 hours run time. Dimensions: 4-1/8"H x 4"W x 2-1/2"D . Mounting Hardware: Not included . Volts: 12V or 24V. Draw: 0.
Part No: 43200-7
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#404 High Density Filler
Use this filler when ultimate strength is most important A thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap-filling where maximum strength is necessary. May be added to the resin/hardener at a rate of 20–30% by weight, depending on the viscosity needed.
Part No: 404-B
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Surface SKYScreens
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
Part No: SFSS-1039-B
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Heads
For extra safety and peace of mind the intuitive, simple to use, Twist 'n' Lock action handle guards against syphonic flooding and waste backflow. Turning the handle back to the natural operating position opens the lock again. Twist 'n' Lock safety handle and flush control lever. Full sized external seal housing allows quick clean seal replacement and instant access to pump cylinder. Crevice free contours and smooth mouldings for added hygiene. Automatic vacuum breaker for easier pumping.
Part No: 29120-3000
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Y-Adapters
Y-adapters let you split one shore power outlet between two power cords (You’re still limited to the rated amperage of the outlet. ) All Y adapters are locking and equipped with covers and sealing collars.
Part No: 152AY
|
|
|
|
Home -> Safety -> Safety Harnesses->Skiff Harness
It uses the state-of-the-art RWO Quick Release Hook for safer trapezing with a pushbutton release that can be activated when the hook is under load, and operates facing up or down. An integrated kidney belt and aluminum back plate provide lower back support. The harness has multiple adjustment options to create the most comfortable fit, and a Kevlar-reinforced seat for lightweight abrasion resistance on a nonskid cockpit or deck. Carbon.
Part No: 4900GCM
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->All Deck Boat Cover
Combines the simplicity of conventional boat cover installation with the tight fit and durability of our premium shrinkwrap.
Part No: SC-D1426D
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5907
|
|
|
