Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Fender Pump from TAYLOR
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
|
|
|
|
84"Beam from TAYLOR, 92"Beam from TAYLOR, Gallon from INTERLUX
|
|
Home -> Engine Systems -> Engine Parts->Permanent Magnet I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-6275
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Flexible Vinyl Rub Rail Replacement Kits with Inserts
Excellent universal rub rail fits many different boat models. Flexible vinyl rub rail is easy to bend and provides a soft cushioning effect against normal bumps from pilings and docks. It’s easy to install using basic tools and comes in a continuous coil for seamless application. Includes rub rail (in a continuous coil for one-piece installation without seams) insert, end caps, screws (matching for colored rub rail) and installation guide. Installation DVD included.
Part No: V11-0809BBK50-2
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24569-09
|
|
|
|
Home -> Electronics -> Radars->Sailboat & Trawler Mast Platform Radar Mounts
Made of powder-coated cast aluminum. The low-profile mast mount designs have swiveling feet to fit any size mast and fit all popular radars. When choosing your platform, check the diameter of your radome. Universal models fit JRC, Furuno, Sitex, Simrad and Koden.
Part No: SM-18-U
|
|
|
|
Home -> Engine Systems -> Engine Parts->Outboard Starters
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
Part No: 18-5614
|
|
|
|
Home -> Electronics -> Boat Instruments->Traditional Series SailPod Systems
The 9. 5"W and 12"W are two of NavPod's most popular sail systems. Each features a 3 instrument NavPod, radar/chartplotter NavPod and a polished stainless steel two-bend 1. 25"dia.
Part No: AG10
|
|
|
|
Home -> Safety -> Life Jackets -> Commercial Life Jackets->Imperial Commercial Inflatable Life Vests
Designed specifically for commercial use, these OSHA (Occupational Health & Safety Administration) compliant vests provide outstanding comfort without sacrificing safety features. Comfortable neck area has no Velcro or edge binding to cause chafing or abrasion. Exterior inflation system access flap allows for clear, direct access to the CO2 cylinder for rearming. Includes signal whistle and SOLAS-grade retro-reflective tape on inflatable bladder. Flotation Material: Urethane-coated foam .
Part No: 45-61019-105BK
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering
No-Feedback (NFB™) Teleflex Marine's patented No-Feedback Steering Control technology provides precision control at a reasonable cost, whether in a rack and pinion or rotary system. All No-Feedback Kits include Bezel, Helm, Cable, and Hardware for installation. Note: XX stands for cable length (e. g. , 06 for 6 ft; 10 for 10 ft.
Part No: SHT91523
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->BoatGuard Mooring Whips
Finally an economical way to protect your boat. Designed with the same tough standards as the fixed base and premium Mooring whips, the new Whips provide a "Safety Zone" between dock and boat for many types of docking applications. Take care of your ski boat, runabout, center console, or bass boat with this easy to use docking solution.
Part No: 99079
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Polymer Lumber->Marine Lumber Plastic Building Material
An ideal material for building projects to replace worn-out teak or plastic laminates. Marine Lumber is high-density polyethylene which is stabilized to resist saltwater, chemicals, and sunlight. It will not rot or delaminate, and is easily cut, routed, shaped and drilled, using standard woodworking tools. It retains its original color indefinitely, and doesn’t require refinishing. The scuff-resistant surface cleans easily and quickly with a scrub brush and light abrasive cleaner.
Part No: P10-5048BLK54
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Fixed Shank Scoop Anchors->Supreme Anchors
The sharp spear point digs right in, penetrates deeply and sets rapidly, and the dual operation shank has two slots for easy retrieval in different seabed conditions: Long slot for rock and coral, or short slot for sand, mud, weed and grass. Choose galvanized steel for maximum strength or polished stainless steel. Roll bar for self-righting resets Cons: Can be expensive depending what size and material you choose Style: Fixed shank "scoop" plow. Material: High-tensile steel.
Part No: SUP15
|
|
|
|
Home -> Fishing -> Reels->Graph-Lite Lever Drag Reels
From their lightweight, high-strength, corrosion-resistant matte graphite frame and side plates with satin-finished brushed metal components, machined stainless steel gears, four aircraft-grade shielded stainless ball bearings and stainless reel stand to their machined black anodized aluminum spool—the same performance as in Penn's Formula Series can be found in these Graph-Lite reels. Drag: HT100™ has been Penn’s drag material of choice.
Part No: 0009-0267
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Deluxe Chainstoppers
Chainstoppers stop the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way.
Part No: P102212
|
|
|
|
Patterned towards high-powered, flat-wake designed, competition ski boats built with elongated cockpits. A windshield and a ski-tow bar make up the two dominant features projecting above the deck. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 76825
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Corsair IV Compasses
Front read (bracket- and binnacle-mount) and dual read (flush-mount) cards with 5¡ increments feature patented GLOBALBalanceª cards for no-spin performance and perfect balance anywhere in the world. Unique telescoping hood protects the compass when not in use. With 12V night lighting and built-in compensators. Flush-mount model has a 3 3/4" cutout and extends 2 3/4" below the mounting surface. : 3 3/4" . Card Type: Front or dual reading . Case Material: High temperature ABS .
Part No: C398F-3
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Mooring Pendants
PolyNylon pendants feature a tough polyester cover with a Marine-Tech coating for improved abrasion resistance and a nylon core for maximum stretch. Professionally hand-spliced eye, heavy-duty galvanized thimble and a movable chafe sleeve provides a long-lasting durable mooring attachment device.
Part No: 539K6-32-00025
|
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Corsair IV Compasses
Front read (bracket- and binnacle-mount) and dual read (flush-mount) cards with 5¡ increments feature patented GLOBALBalanceª cards for no-spin performance and perfect balance anywhere in the world. Unique telescoping hood protects the compass when not in use. With 12V night lighting and built-in compensators. Flush-mount model has a 3 3/4" cutout and extends 2 3/4" below the mounting surface. : 3 3/4" . Card Type: Front or dual reading . Case Material: High temperature ABS .
Part No: C399D-3
|
|
|
|
|
Patterned towards high-powered, flat-wake designed, competition ski boats built with elongated cockpits. A windshield and a ski-tow bar make up the two dominant features projecting above the deck. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 76827
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 70 - Modified Epoxy, (Commercial/Industrial Only)
Marine AC 70 - Modified Epoxy - Commercial/Industrial Only A surface tolerant, two part 70% solids tar free epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 7022-5GB
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Lounge Seats
When you add comfortable seating to your pontoon or deck boat, you reap the benefits of a major upgrade with a relatively small investment and easy installation. Fully enclosed storage in seat. Heavy duty marine-grade vinyl . High-density Polyurethane foam. 100% plastic frame construction. Measures: 27".
Part No: BM95-204/208/03
|
|
|
|
Home -> Engine Systems -> Steering Systems->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SH5000P
|
|
|
|
Home -> Engine Systems -> Steering Systems->QC II Steering Cables
Single station cable assembly, push/pull action. Direct replacement for SSC62 and SSC72 cables. Fits old style (i. e. , threaded) Safe-T, Big-T, Safe-T Quick Connect and NFB Rotary helms.
Part No: SSC6125
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 70 - Modified Epoxy, (Commercial/Industrial Only)
Marine AC 70 - Modified Epoxy - Commercial/Industrial Only A surface tolerant, two part 70% solids tar free epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 7016-5GB
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Boat Stands->Adjustable Boat Stands - Power Boats
These adjustable stands support and stabilize the weight of a boat on land Every stand features easy-to-use handles for quick and secure adjustment and every stand has been totally submerged in paint to resist rust, inside and out. Full-length center pipes ensure stability and provide extra protection for the full-size 1 7/16" Acme threads. Angle iron bases prevent damage to pavement. A safety chain notch accepts 3/16" galvanized chain. Bow-heavy boats require a Vee at the bow.
Part No: MB-0
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories
Ideal for parallel dual-station installations when two-lever, single-function controls are used. Allows two clutch or two throttle cables to be connected to a single cable leading aft to the engine.
Part No: 061371
|
|
|
|
Home -> Seating & Covers -> Seating->Deluxe Captain's Stand Console
This solid, attractively styled console with recessed drink holders is lightweight, yet incredibly strong. A large access door makes installation and wiring simple. Roto-molded plastic. Measures: 32. 25"H x 26.
Part No: 115W-204
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Ultra® Antifouling Paint
The new and improved fast dry formula of Ultra allows you to paint and launch the same day. Ultra provides excellent long-term protection from shell and weed fouling. Ultra is recommended for use wherever the fouling challenge is severe, and can be used in fresh, salt and brackish water on fiberglass, wood and properly primed steel boat hulls and parts. Type: Modified epoxy . Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood hulls . Biocide: 66. 5% Cuprous Oxide.
Part No: Y3559F/1
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->360 Circuit Breaker Panel System
AC and DC panels feature an interchangeable modular design with open architecture and flexible layouts that eliminates custom engineering and metal fabrication. Flat rocker actuators have a modern appearance and protection against accidental switching. The AC Panels may be equipped with main breakers up to 100A per pole to suit the application. Large selection of 360 System panels are available by Special Order. Switch Type: Rocker . Lighting: LEDs on each circuit illuminate to indicate ON .
Part No: 1208
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 70 - Modified Epoxy, (Commercial/Industrial Only)
Marine AC 70 - Modified Epoxy - Commercial/Industrial Only A surface tolerant, two part 70% solids tar free epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 7004-5GB
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->94U-1000C Catalyst
Mix 94U-1000C catalyst with the 94U-1000 Low VOC White Primer and apply immediately as no pre-reaction time is needed. 94U-1000C catalyst only Mix 2:1 primer with catalyst.
Part No: 94U-1000C HG
|
|
|
