Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
Gasket from SIERRA, Powerpack from SIERRA, SWL from LEWMAR
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Hella Marine introduces the new LED Mega Beam deck floodlight, providing all the reliability and power saving advantages of Hella marine LED technology. Hella marine MultivoltTM electronics provide consistent illumination and circuit protection across a range of inputs from 9-30V DC for an ultra long service life. LED Mega Beam floodlights are the answer for energy efficient, completely sealed, shock and vibration resistant illumination. Material: UV and impact resistant plastic front housing.
Part No: 996136221
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. KeelGuard - Protects against abrasive sand, rocks, concrete ramps and oyster beds. Eliminates costly repairs. Enjoys the highest quality and superior engineering.
Part No: 20110
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Wide-Step Dock Ladders
Heavy-duty aluminum dock ladder features extra wide steps for increased security under foot. The 17"L x 4"W steps have slightly rounded edges so you feel comfortable and stable when climbing in and out of the water. Grooved surface offers traction, yet still remains kind to your feet. 12" vertical spacing between steps. Standard style for permanent mounting on a dock or seawall. max boarding capacity. Material: 1-1/4" ID 6063 T-5 marine-grade aluminum.
Part No: S-3WS
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Stern->Varimax Great White Digital Saltwater Series
Anglers will be quick to recognize the rugged functional styling of the VariMAX highlighted by the intuitive push/pull, forward and reverse speed adjustments. The BluVis Function Display shows direction (forward/reverse), precise speed settings, and 10 levels of battery voltage when turned off. Fish 3. 5 times longer, fish at exactly the speed you want, and fish more quietly. Perfect for all-day fishing expeditions, VariMAX delivers over 3-times the battery life of traditional 5-speed motors.
Part No: 966010020
|
|
|
|
Home -> Cabin & Galley -> Bedding & Drapery -> Sleeping Bags, Bedrolls->TravaSak Sleep System
.
Part No: 166BI
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-112-3
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: AFC-2458B
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->Ocean T-Track Genoa Cars
For boats from 30'–48' with 1-1/4" T-track. Sheaves tilt and swivel to align with the load. Full articulation ensures a fair lead to winch or turning block. Features easy-to-adjust plungers and sheaves that can pass two sheets.
Part No: 29042700
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-112-312
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**GasketSet-Overhaul|**GasketSet-Overhaul.
Part No: 18-4382
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Power Pack|**Power Pack.
Part No: 18-5893
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: AFC-2458N
|
|
|
|
Home -> Fishing -> Reels -> Baitcasting Reels
Packed with features and built for the perfect mix of smooth function and rugged durability, the Sargus low profile baitcast reel is sure to become another PENN legend. Machined aluminum frame and right side plate . Stainless steel clutch . Externally adjustable centrifugal brake system . Carbon fiber drag washers. 9. 5 oz. Gear ration 6. 4:1. Max Drag 15lb. .
Part No: 0009-1487
|
|
|
|
Home -> Fishing -> Reels->Saltist Saltwater Conventional Reels
Built For Today’s Super Braids Introducing Daiwa’s new Saltist™, with the features and rugged “Full-Metal Jacket” construction demanded by today’s ultra-strong braided lines and mono. 9 to 1 retrieve or new ultra high speed 6. 4 to 1 retrieve models that rip in over 47 inches of line with every crank, just the ticket for Kingfish. Features: Rugged, all-metal construction with rigid, one-piece aluminum frame . Super Drag . Up to 30% greater winding power . Powerful, high-strength alloy gears .
Part No: STT50H
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Make it easy for your dog to go boating with you! Make it easy for your dog to get on and off your vessel, so you can enjoy boating adventures together! The portable 16" x 64" pet ladder/ramp attaches to any boat ladder and features a slip-resistant rubbed design that's safe for all pets. Dogs can go from water to the boat deck safely without straining or injuring joints. Folds in half for easy storage. UV-resistant, Corrosion-proof, and it floats. Portable, lightweight and durable.
Part No: 5200
|
|
|
|
Home -> Electronics -> Fishfinders->Fishfinder 160C
An affordable color sounder packed with all of Garmin's advanced fishfinding features!The Fishfinder 160C is an affordable color sonar option for recreational fishermen who primarily fish freshwater lakes. The Fishfinder 160C offers dual-beam transducer operation for improved shallow water performance. Like all Garmin fishfinders, the 160C is rugged, waterproof, and able to stand up to the elements. AutoGain, as well as user adjustable gain, is also standard on all of Garmin’s new fishfinders.
Part No: 010-00403-00
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->ViViD-Free Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) Resistant to slime, algae, barnacles and other marine fouling, Vivid Free features a slow-eroding formula combined with PTFE and the latest biocide technology to minimize coating buildup and keep underwater surfaces smooth and clean. Colors are clean and bright and because it is copper-free, it is a good choice for regulated waters where copper-based paints are not allowed. Gallon. Resistant to slime, algae, barnacles and other marine fouling; 4.
Part No: 1116206
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Men's Crew Element Jacket
The Crew Element Jacket provides excellent warmth with Thermore® synthetic fill. It is also very lightweight, breathable and fully waterproof. Thermore® synthetic fill providing excellent warmth to weight ratio, compresses easily and insulates when wet . Fully taped seams . Waterproof and breathable 2 layer laminated fabric. Taffeta lining brushed mesh collar. Packable lightweight hood. Water- resistant front zip. Zipped internal pocket.
Part No: CHARCOAL-2X
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Solar Panels->Sunsei® Solar-Powered Battery Chargers
Free Solar Grip Mount. 99 Value. With your purchase of a Sunsei SE-500 Solar Battery Charger. Keep charged with the power of the sun! Solar power is clean, abundant and worry-free. And now, with 25% more power, these solar chargers are offered in 150mA, 500mA and 1. 5A versions—a step up in power from the previous 135mA, 400mA and 1. Panels power-up when exposed to daylight, depending on the level of brightness, and they protect against natural battery discharge and electronic drain.
Part No: 25015
|
|
|
|
Home -> Electronics -> Boat Instruments -> Multifunction Instruments->Intelliducers™ for GMI 10 Digital Instrument Display
These versatile thru-hull sensors provide depth and water temperature data and sends it to your NMEA 2000 or NMEA 0183 Garmin digital marine instrument display or chartplotter.
Part No: 010-00701-01
|
|
|
|
Home -> Electrical -> Meters & Distribution->Digital Electrical Meter Series
Digital electrical meters feature an innovative shape that makes them easy to switch out and install. Large, bright LED display features waterproof front with easy pushbutton controls. Front mounts in a standard 2" round hole. Rear mounts in any full size electrical panel meter cut out. Uses easy spin-on mounting system. View Diagram Display Type: Digital LED . Digit Size: 9/16"H (14. 29mm) . Meter Case Glass: Reinforced Nylon . Dimensions: 2. 43"H x 2.
Part No: 8239
|
|
|
|
Home -> Electronics -> Global Positioning Systems->BlueChart g2, Americas, U.S., Bathymetric, Garmin Datacard
Garmin’s new BlueChart g2 cartography gives mariners detailed offshore coverage with features beyond traditional BlueChart. Integrated maps provide a much smoother presentation on your plotter screen. View charts in 3D perspective. View richer detail and content plus coastal roads and points of interest (POIs), photos of ports, marinas and more (Note: photo coverage is limited to certain areas currently; coverage will grow). .
Part No: 010-C0255-00
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear->Men’s Explorer Coastal Foul Weather Jacket
Comfortable, affordable and rugged — maximum foul weather gear protection at a minimum price Designed for several days of continuous use in rough coastal conditions. Breathable hydrophilic coated fabric removes moisture from the interior while keeping you warm and dry. Nonrestrictive fit allows for maximum maneuverability. This jacket features Nylon Tactel shell with PU coating, waterproof seams, fully lined interior, double storm flap. Imported. Fleece collar. Reflective material.
Part No: YELLOW/DARK GREY-S
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
Know the position of your trim tabs! As durable as it is elegant, the Bennett Tab Positon Indicator (TPI) accurately indicates the position of each trim tab adding precision and confidence to trim tab operation. They are easily retrofitted to existing Bennett Trim Tabs, and can be adapted to Boat Leveler brand Instatrim systems. The TPI2000 keeps you fully informed for maximum efficiency, performance, and total control of your trim tab system For use with all Bennett Trim Tab Systems .
Part No: TPI2000-SV
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear->Men’s Explorer Coastal Foul Weather Jacket
Comfortable, affordable and rugged — maximum foul weather gear protection at a minimum price Designed for several days of continuous use in rough coastal conditions. Breathable hydrophilic coated fabric removes moisture from the interior while keeping you warm and dry. Nonrestrictive fit allows for maximum maneuverability. This jacket features Nylon Tactel shell with PU coating, waterproof seams, fully lined interior, double storm flap. Imported. Fleece collar. Reflective material.
Part No: RED/DARK GREY-M
|
|
|
|
Home -> Electrical -> Shore Power
Water-resistant adapters are fully molded . Includes 104A, 105A, 121A adapters. Includes heavy-duty nylon zippered storage bag with handle . Includes sealing covers.
Part No: 199122
|
|
|
|
Home -> Electronics -> Global Positioning Systems->C-MAP C-Card, Gulf & Caribbean Sea
LUCIE INLET TO LAKE PONTCHARTRAIN 2 M-NA-C049 RED AND OUACHITA RIVERS 3 M-NA-C402 PENSACOLA BAY TO GULF OF HONDURAS 4 M-NA-C501 CUBA TO TRINIDAD AND TOBAGO 5 M-NA-C502 WESTERN CARIBBEAN SEA 6 M-NA-C309 JACKSONVILLE TO FORT MYERS 7 M-NA-C306 BAHAMAS 8 M-NA-C311 CUBA, JAMAICA AND THE CAYMAN ISLANDS.
Part No: NA-C501
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Fixed Storage
Organize and keep toilet paper dry with this handsome cabinetMolded door and attractive hardware for a smooth and finished look. Acrylic coated ABS for glossy, gel-coat-like finish. Dimensions: OD 11. 5"W x 19. 5"H x 5. 75"D; ID 10. 2"W x 17.
Part No: 31520000
|
|
|
|
Home -> Electronics -> Global Positioning Systems->C-MAP, C-cards
With the most accurate chart detail, versatile features and a wealth of important value-added data, we take your boating enjoyment to the MAX!.
Part No: NA-M026 C
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Danforth Hi-Tensile Anchors
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.
Part No: 3H960
|
|
|
